ITExamDump는 여러분의 꿈을 이루어줄 뿐만 아니라 일년무료 업뎃서비스도 따릅니다. ITExamDump에서 제공하는 덤프로 여러분은 1000%시험을 패스하실수 있고CompTIA PD1-001자격증을 취득하실 수 있습니다.지금 바로 사이트에서CompTIA PD1-001덤프데모 즉 덤프의 일부 문제와 답을 다운 받으셔서 체험하실 수 있습니다.
ITExamDump는 여러분이 빠른 시일 내에CompTIA PD1-001인증시험을 효과적으로 터득할 수 있는 사이트입니다.CompTIA PD1-001덤프는 보장하는 덤프입니다. 만약 시험에서 떨어지셨다고 하면 우리는 무조건 덤프전액 환불을 약속 드립니다. 우리ITExamDump 사이트에서CompTIA PD1-001관련자료의 일부분 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump의CompTIA PD1-001덤프로 자신 있는 시험준비를 하세요.
CompTIA PD1-001인증은 아주 중요한 인증시험중의 하나입니다. ITExamDump의 베터랑의 전문가들이 오랜 풍부한 경험과 IT지식으로 만들어낸 IT관연인증시험 자격증자료들입니다. 이런 자료들은 여러분이CompTIA인증시험중의PD1-001시험을 안전하게 패스하도록 도와줍니다. ITExamDump에서 제공하는 덤프들은 모두 100%통과 율을 보장하며 그리고 일년무료 업뎃을 제공합니다
CompTIA PD1-001인증시험도 어려울 뿐만 아니라 신청 또한 어렵습니다.CompTIA PD1-001시험은 IT업계에서도 권위가 있고 직위가 있으신 분들이 응시할 수 있는 시험이라고 알고 있습니다. 우리 ITExamDump에서는CompTIA PD1-001관련 학습가이드를 제동합니다. ITExamDump 는 우리만의IT전문가들이 만들어낸CompTIA PD1-001관련 최신, 최고의 자료와 학습가이드를 준비하고 있습니다. 여러분의 편리하게CompTIA PD1-001응시하는데 많은 도움이 될 것입니다.
시험 번호/코드: PD1-001
시험 이름: CompTIA (CompTIA PDI+ Beta Exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 861 문항
업데이트: 2014-04-01
CompTIA인증PD1-001시험을 패스하기가 어렵다고 하면 합습가이드를 선택하여 간단히 통과하실 수 잇습니다. 우리ITExamDump에서는 무조건 여러분을 위하여 관연 자료덤프 즉 문제와 답을 만들어낼 것입니다. 우리덤프로CompTIA인증PD1-001시험준비를 잘하시면 100%CompTIA인증PD1-001시험을 패스할 수 있습니다. ITExamDump덤프로 여러분은CompTIA인증PD1-001시험을 패스는 물론 여러분의 귀증한 간도 절약하실 수 있습니다.
IT인증시험문제는 수시로 변경됩니다. 이 점을 해결하기 위해ITExamDump의CompTIA인증 PD1-001덤프도 시험변경에 따라 업데이트하도록 최선을 다하고 있습니다.시험문제 변경에 초점을 맞추어 업데이트를 진행한후 업데이트된CompTIA인증 PD1-001덤프를 1년간 무료로 업데이트서비스를 드립니다.
PD1-001 덤프무료샘플다운로드하기: http://www.itexamdump.com/PD1-001.html
NO.1 A technician is troubleshooting a network connectivity issue on a MFD and would like to eliminate the
possibility of another device on the network having the same IP address. The technician should:
A.disconnect the MFD and ping the IP address.
B.disconnect the MFD and ping the subnet mask.
C.disconnect the MFD and ping the loopback address.
D.run the ipconfig command from the command prompt.
Answer: A
CompTIA기출문제 PD1-001기출문제 PD1-001
NO.2 A polygon mirror is part of which of the following assemblies?
A.Laser unit
B.Developer unit
C.Charge assembly
D.Fuser assembly
Answer: A
CompTIA dumps PD1-001 PD1-001 PD1-001덤프 PD1-001 PD1-001
NO.3 The polygon mirror is located in which of the following components?
A.Developer unit
B.Scanner unit
C.Fuser unit
D.Laser unit
Answer: D
CompTIA PD1-001 PD1-001 PD1-001시험문제
NO.4 A customer is concerned about excessive media jamming in their device. Which of the following is the
FIRST thing a technician should check?
A.Media feed rollers
B.Cassette drawers
C.Fusing section
D.Device log data
Answer: D
CompTIA자료 PD1-001덤프 PD1-001
NO.5 When is it advisable to dump the waste toner from a technicians service vacuum?
A.When it is full.
B.It is not recommended.
C.Before performing preventative maintenance.
D.After each call.
Answer: B
CompTIA PD1-001기출문제 PD1-001 dumps PD1-001덤프 PD1-001 dumps
NO.6 Which of the following utilities could be used to determine a subnet mask?
A.PING
B.NSLOOKUP
C.TRACERT
D.IPCONFIG
Answer: D
CompTIA덤프 PD1-001 PD1-001
NO.7 The customer has a dedicated ink jet fax machine that is used to send and receive faxes only from the
corporate office. The user complains of streaks on the received faxes while the internal self-prints are fine.
Which of the following should a technician recommend?
A.Clean the scanner glass on the distant machine.
B.Clean the scanner glass on the local machine.
C.Clean the printer head on the local machine.
D.Call the telephone company to increase the line signal level.
Answer: A
CompTIA PD1-001 PD1-001 PD1-001
NO.8 Which of the following is the purpose of a torque limiter in a roller?
A.To reduce wear and tear on rollers.
B.To provide resistance but still allow some slippage.
C.To limit the amount of movement by media.
D.To make it easier to replace rollers.
Answer: B
CompTIA기출문제 PD1-001 PD1-001자격증 PD1-001
NO.9 The proper safety guidelines for handling any device specific consumables can be found in which of
the following documentation?
A.Material Safety Data Sheets
B.Installation Guides
C.Consumer Reports
D.Devices Parts Catalog
Answer: A
CompTIA PD1-001 PD1-001 PD1-001 PD1-001자격증
NO.10 Which of the following components is part of the ink dispersion system?
A.Print Heads
B.Cleaning heads
C.Pickup Roller
D.Charge Assembly
Answer: A
CompTIA PD1-001 dumps PD1-001
NO.11 An encoder sensor typically detects:
A.paper position.
B.shaft rotation.
C.magnetic flux.
D.laser beam strength.
Answer: B
CompTIA dump PD1-001시험문제 PD1-001 PD1-001덤프 PD1-001 dump
NO.12 A customer has installed a new computer on their network. They can print to the printer but the option
for duplex printing is not available. All other computers have the option. Which of the following is the
cause of the problem?
A.The new computer is printing to the wrong IP address.
B.The new computer is using the wrong protocol.
C.The driver port is not setup correctly.
D.The option has not been selected on the driver.
Answer: D
CompTIA PD1-001 PD1-001자료 PD1-001인증
NO.13 Which of the following functions is associated with the developer unit?
A.Supplies toner to the photoconductor
B.Charges the surface of the photoconductor
C.Writes the latent image on the photoconductor
D.Cleans the photoconductor
Answer: A
CompTIA기출문제 PD1-001 PD1-001 PD1-001 PD1-001 PD1-001
NO.14 During the photoconductor preparation step, residual charge can be removed by which of the
following? (Select TWO).
A.Pressure
B.Oil
C.Light
D.Gravity
E.Electrical Charge
Answer: CE
CompTIA PD1-001 PD1-001자격증 PD1-001 PD1-001 dumps
NO.15 Which of the following would be the BEST process for the technician to follow when beginning to
diagnose a unit at a customers site?
A.Check the printers error log, and then inform the primary user what the issue is.
B.Go directly to the printer and investigate any issues that are found.
C.Investigate the printers status, then ask the primary user to write down what they think is wrong.
D.Gather information from the primary user, and then evaluate the printers condition.
Answer: D
CompTIA PD1-001 PD1-001
NO.16 Which of the following is a reason black toner is used in color printers?
A.It decreases the print speed in color laser printers.
B.It prevents moir patterns when printing color photographs.
C.It reduces the cost per page when printing gray scale documents.
D.It makes the color toner resistant to smudging when wet.
Answer: C
CompTIA PD1-001자격증 PD1-001 PD1-001
NO.17 Using the CMYK color model, the color purple is produced by combining cyan and which other color?
A.Green
B.Magenta
C.Yellow
D.Black
Answer: B
CompTIA PD1-001 PD1-001 PD1-001 PD1-001시험문제
NO.18 How many CCDs are located in a single pass duplex ADF?
A.One
B.2
C.3
D.4
Answer: B
CompTIA pdf PD1-001인증 PD1-001 PD1-001 PD1-001
NO.19 In which of the following sections of an MFP would a technician find a Xenon Lamp?
A.The paper feed section
B.The fuser section
C.The scanner section
D.The transfer section
Answer: C
CompTIA PD1-001 PD1-001
NO.20 Which of the following stages in the laser print process attracts toner to the latent image on the
photoconductor?
A.Writing
B.Fusing
C.Development
D.Transfer
Answer: C
CompTIA PD1-001 PD1-001최신덤프 PD1-001
ITexamdump의 HP0-J63덤프의 VCE테스트프로그램과 MSC-321덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 VCAW510시험에 대비한 고품질 덤프와 HP3-C29시험 최신버전덤프를 제공해드립니다. 최고품질 156-315.13시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기