우리ITExamDump 에서는 여러분들한테 아주 편리하고 시간 절약함과 바꿀 수 있는 좋은 대책을 마련하였습니다. ITExamDump에서는Microsoft 070-503-Csharp인증시험관련가이드로 효과적으로Microsoft 070-503-Csharp시험을 패스하도록 도와드리겠습니다.만약 여러분이 다른 사이트에서도 관련덤프자료를 보셨을 경우 페이지 아래를 보시면 자료출처는 당연히 ITExamDump 일 것입니다. ITExamDump의 자료만의 제일 전면적이고 또 최신 업데이트일것입니다.
Microsoft인증 070-503-Csharp시험준비중이신 분들은Microsoft인증 070-503-Csharp시험통과가 많이 어렵다는것을 알고 있을것입니다. 학교공부하랴,회사다니랴 자격증공부까지 하려면 너무 많은 정력과 시간이 필요할것입니다. 그렇다고 자격증공부를 포기하면 자신의 위치를 찾기가 힘들것입니다. ITExamDump 덤프는 IT인증시험을 대비하여 제작된것이므로 시험적중율이 높아 다른 시험대비공부자료보다 많이 유용하기에 IT자격증을 취득하는데 좋은 동반자가 되어드릴수 있습니다. ITExamDump 덤프를 사용해보신 분들의 시험성적을 통계한 결과 시험통과율이 거의 100%에 가깝다는 놀라운 결과를 얻었습니다.
070-503-Csharp인증시험은Microsoft인증시험중의 하나입니다.그리고 또한 비중이 아주 큰 인증시험입니다. 그리고Microsoft 070-503-Csharp인증시험 패스는 진짜 어렵다고 합니다. 우리ITExamDump에서는 여러분이070-503-Csharp인증시험을 편리하게 응시하도록 전문적이 연구팀에서 만들어낸 최고의070-503-Csharp덤프를 제공합니다, ITExamDump와 만남으로 여러분은 아주 간편하게 어려운 시험을 패스하실 수 있습니다,
ITExamDump는Microsoft인증070-503-Csharp시험에 대하여 가이드를 해줄 수 있는 사이트입니다. ITExamDump는 여러분의 전업지식을 업그레이드시켜줄 수 잇고 또한 한번에Microsoft인증070-503-Csharp시험을 패스하도록 도와주는 사이트입니다. ITExamDump제공하는 자료들은 모두 it업계전문가들이 자신의 지식과 끈임없은 경헌등으로 만들어낸 퍼펙트 자료들입니다. 품질은 정확도 모두 보장되는 문제집입니다.Microsoft인증070-503-Csharp시험은 여러분이 it지식을 한층 업할수 잇는 시험이며 우리 또한 일년무료 업데이트서비스를 제공합니다.
시험 번호/코드: 070-503-Csharp
시험 이름: Microsoft (TS: MS.NET Frmwrk 3.5, Wndws Commun Fndtion App Dev)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 75 문항
업데이트: 2014-04-17
070-503-Csharp 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-503-Csharp.html
NO.1 You are creating a Windows Communication Foundation (WCF) service by using Microsoft .NET
Framework 3.5.
You configure a binding to enable streaming.
You need to ensure that the client application is able to stream large XML files to the WCF service.
Which operation contract should you create?
A. [OperationContract]
void UploadFile(Stream xmlData);
B. [OperationContract]
void UploadFile(XmlWriter xmlData);
C. [OperationContract]
void UploadFile(StreamWriter xmlData);
D. [OperationContract]
void UploadFile(byte[] xmlData);
Answer: A
Microsoft 070-503-Csharp최신덤프 070-503-Csharp 070-503-Csharp 070-503-Csharp
NO.2 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to ensure that data sent in a SOAP header is in the following XML format.
<Data>
<string>String 1</string>
<string>String 2</string>
<string>String 3</string>
</Data>
Which code segment should you use?
A. [MessageContract]
public class MyMessage
{
[MessageHeader]
public string[] Data;
}
B. [MessageContract]
public class MyMessage
{
[MessageHeaderArray]
public string[] Data;
}
C. [MessageContract]
public class MyMessage
{
[MessageProperty]
public string[] Data;
}
D. [MessageContract]
public class MyMessage
{
[MessageBodyMember (Order=0)]
public string[] Data;
}
Answer: A
Microsoft최신덤프 070-503-Csharp 070-503-Csharp 070-503-Csharp dump 070-503-Csharp 070-503-Csharp
NO.3 }
NO.4 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
You write the following code segment.
[ServiceContract]
public interface IMathService
{
[OperationContract]
int AddNumbers(int a, int b);
double AddNumbers(double a, double b);
}
You have not deployed the IMathService service.
You need to expose the AddNumbers (double a, double b) operation to the IMathService service contract.
Which code segment should you use?
A. [OperationContract]
int AddNumbers(int a, int b);
[OperationContract]
double AddNumbers(double a, double b);
B. [OperationContract(Name="AddInt")]
int AddNumbers(int a, int b);
[OperationContract(Name="AddDouble")]
double AddNumbers(double a, double b);
C. [OperationContract(Action="IMathService/AddInt")]
int AddNumbers(int a, int b);
[OperationContract(Action="IMathService/AddDouble")]
double AddNumbers(double a, double b);
D. [OperationContract(Action="AddInt/*")]
int AddNumbers(int a, int b);
[OperationContract(Action="AddDouble/*")]
double AddNumbers(double a, double b);
Answer: B
Microsoft최신덤프 070-503-Csharp 070-503-Csharp 070-503-Csharp
NO.5 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 Uri baseAddress=
02 new Uri ( http://localhost:8000/ExamService );
03 Uri mexAddress=new Uri("");
04 ServiceHost serviceHost=new ServiceHost(typeof(
05 ?ExamService), baseAddress);
06 ServiceMetadataBehavior smb=
07 serviceHost.Description.Behaviors.
08 Find<ServiceMetadataBehavior>();
09 if (smb != null)
10 {
11
12 }
13 else
14 {
15 smb=new ServiceMetadataBehavior();
16 serviceHost.Description.Behaviors.Add(smb);
NO.6 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to ensure that the service can send data in the following format to the client applications.
<Account Id="">
<Name> </Name>
<Balance Currency=""> </Balance>
</Account>
Which code segment should you use?
A. [Serializable]
public class Account
{
[XmlAttribute]
public string Id;
[XmlElement]
public string Name;
[XmlAttribute]
public string Currency;
[XmlElement]
public double Balance;
}
B. [DataContract]
public class Account
{
[DataMember(Order=0)]
public string Id;
[DataMember(Order=1)]
public string Name;
[DataMember(Order=0)]
public double Balance;
[DataMember(Order=1)]
public string Currency;
}
C. [Serializable]
public class Account
{
[XmlAttribute]
public string Id;
public string Name;
[XmlElement("Balance")]
public BalanceVal Balance;
}
[Serializable]
public class BalanceVal
{
[XmlText]
public double Amount;
[XmlAttribute]
public string Currency;
}
D. [DataContract]
public class Account
{
[DataMember(Order=0)]
public string Id;
[DataMember(Order=1)]
public string Name;
[DataMember(Name="Balance", Order=2)]
public BalanceVal Balance;
}
[DataContract]
public struct BalanceVal
{
[DataMember(Order=0)]
public double Balance;
[DataMember(Order=1)]
public string Currency;
}
Answer: C
Microsoft 070-503-Csharp 070-503-Csharp pdf
NO.7 You create a Windows Communication Foundation (WCF) service by using Microsoft .NET Framework
3.5.
The WCF service contains two operations named ProcessSimpleOrder and ProcessComplexOrder.
You need to expose the ProcessSimpleOrder operation to all the client applications. You also need to
expose the ProcessComplexOrder operation only to specific client applications.
Which code segment should you use?
A. [ServiceContract]
public interface IOrderManager
{
[OperationContract(Action="*")]
void ProcessSimpleOrder();
[OperationContract]
void ProcessComplexOrder();
}
B. [ServiceContract]
public interface IOrderManager
{
[OperationContract(Name="http: //contoso.com/Simple")]
void ProcessSimpleOrder();
[OperationContract(Name="http: //contoso.com/Complex")]
void ProcessComplexOrder();
}
C. [ServiceContract]
public interface ISimpleOrderManager
{
[OperationContract]
void ProcessSimpleOrder();
}
[ServiceContract]
public interface IComplexOrderManager: ISimpleOrderManager
{
[OperationContract]
void ProcessComplexOrder();
}
D. [ServiceContract]
public interface ISimpleOrderManager
{
[OperationContract(Name="http: //contoso.com/Simple")]
void ProcessSimpleOrder();
}
public interface IComplexOrderManager: ISimpleOrderManager
{
[OperationContract(Name="http: //contoso.com/Complex")]
void ProcessComplexOrder();
}
Answer: C
Microsoft dump 070-503-Csharp pdf 070-503-Csharp 070-503-Csharp 070-503-Csharp 070-503-Csharp기출문제
NO.8 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to programmatically add the following endpoint definition to the service.
http://localhost:8000/ExamService/service
Which code segment should you use?
A. String baseAddress="http: //localhost:8000/ExamService";
BasicHttpBinding binding1=new BasicHttpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
B. String baseAddress="http: //localhost:8000/ExamService/service";
BasicHttpBinding binding1=new BasicHttpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
C. String baseAddress="http: //localhost:8000/ExamService";
WsHttpBinding binding1=new WsHttpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
D. String baseAddress="net.tcp: //localhost:8000/ExamService/service";
NetTcpBinding binding1=new NetTcpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
Answer: B
Microsoft 070-503-Csharp 070-503-Csharp dump 070-503-Csharp 070-503-Csharp
NO.9 When you browse to the base address of the service, you receive the following message: "Metadata
publishing for this service is currently disabled."
You debug the code and discover that the ServiceMetadataBehavior behavior was previously nonexistent.
You need to enable metadata publishing.
What should you do?
A. Delete lines 15 and 16.
B. Modify the code segment at line 03 in the following manner.
Uri mexAddress=new Uri("/service");
C. Insert the following code segment at line 11.
smb.HttpGetEnabled=true;
D. Insert the following code segment at line 19.
smb.HttpGetEnabled=true;
Answer: D
Microsoft최신덤프 070-503-Csharp 070-503-Csharp덤프 070-503-Csharp 070-503-Csharp기출문제
17. You are creating an endpoint for a Windows Communication Foundation service by using
Microsoft .NET Framework 3.5. You create the endpoint by using a custom binding.
You write the following code segment.
BasicHttpBinding binding=new BasicHttpBinding();
binding.Security.Message.ClientCredentialType=
?BasicHttpMessageCredentialType.Certificate;
binding.Security.Mode=BasicHttpSecurityMode.Message;
CustomBinding cb=new CustomBinding(binding);
BindingElementCollection bec=cb.CreateBindingElements();
You need to prevent the custom binding from making a persistent connection to the service endpoint.
Which code segment should you use?
A. cb.SendTimeout=TimeSpan.Zero;
B. binding.ReceiveTimeout=TimeSpan.Zero;
C. foreach (BindingElement bindingElement in bec)
{
HttpTransportBindingElement element=
(HttpTransportBindingElement) bindingElement;
element.KeepAliveEnabled=false;
}
D. foreach (BindingElement be in bec)
{
if (be is HttpTransportBindingElement)
{
HttpTransportBindingElement httpElement=
(HttpTransportBindingElement)be;
httpElement.KeepAliveEnabled=false;
}
}
Answer: D
Microsoft자격증 070-503-Csharp 070-503-Csharp 070-503-Csharp자격증
18. You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
The service will receive notification messages from client applications by using a number of transports,
including HTTP, TCP, MSMQ, and others.
You need to ensure that all client applications can send notification messages to the service.
Which service contract should you use?
A. [ServiceContract]
public interface INotificationService {
[OperationContract(AsyncPattern=true)]
void LogMessage(string message);
}
B. [ServiceContract]
public interface INotificationService {
[OperationContract(ReplyAction="none")]
void LogMessage(string message);
}
C. [ServiceContract]
public interface INotificationService {
[OperationContract(IsOneWay=true)]
void LogMessage(string message);
}
D. [ServiceContract]
public interface INotificationService {
[OperationContract(IsTerminating=true)]
void LogMessage(string message);
}
Answer: C
Microsoft 070-503-Csharp 070-503-Csharp 070-503-Csharp
19. You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
The service will be hosted in a Console application.
You need to configure the service by using a configuration file other than the default app.config file.
Which code segment should you use?
A. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected override void InitializeRuntime()
{
//Load configuration here
}
}
B. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected override void ApplyConfiguration()
{
//Load configuration here
}
}
C. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected new void InitializeDescription(Type serviceType,
UriSchemeKeyedCollection baseAddresses)
{
//Load configuration here.
}
}
D. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected new void AddBaseAddress(Uri baseAddress)
{
//Load configuration here.
}
}
Answer: B
Microsoft dumps 070-503-Csharp 070-503-Csharp덤프 070-503-Csharp덤프
NO.10 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5. The service will be hosted in a managed Console application.
You want to add endpoints to the service.
You need to ensure that all endpoints use the same base address.
Which code fragment should you use?
A. [ServiceContract]
public interface IMortgageService {
public class MortgageService : IMortgageService {
Uri baseAddress=new Uri("http: //localhost:8888/MortgageService");
ServiceHost serviceHost=
new ServiceHost(typeof(MortgageService), new Uri[] {baseAddress });
serviceHost.AddServiceEndpoint(typeof(IMortgageService),
new BasicHttpBinding(), "");
serviceHost.Open();
B. [ServiceContract]
public interface IMortgageService {
public class MortgageService : IMortgageService {
Uri baseAddress=new Uri("http: //localhost:8888/MortgageService");
ServiceHost serviceHost=
new ServiceHost(typeof(MortgageService), new Uri[] {});
serviceHost.AddServiceEndpoint(typeof(IMortgageService),
new BasicHttpBinding(), baseAddress);
serviceHost.Open();
C. [ServiceContract]
public interface IMortgageService {
public class MortgageService : IMortgageService {
string baseAddress="http: //localhost:8888/MortgageService";
ServiceHost serviceHost=
new ServiceHost(typeof(MortgageService), new Uri[] { });
serviceHost.AddServiceEndpoint(typeof(IMortgageService),
new BasicHttpBinding(), baseAddress);
serviceHost.Open();
D. [ServiceContract(Namespace="http: //localhost:8888/MortgageService")]
public interface IMortgageService {
public class MortgageService : IMortgageService {
ServiceHost serviceHost=
new ServiceHost(typeof(MortgageService), new Uri[] { });
serviceHost.AddServiceEndpoint(typeof(IMortgageService),
new BasicHttpBinding(), "");
serviceHost.Open();
Answer: A
Microsoft 070-503-Csharp 070-503-Csharp시험문제 070-503-Csharp
NO.11 smb.HttpGetUrl=mexAddress;
NO.12 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 [ServiceContract(SessionMode=SessionMode.Required)]
02 public interface IOrderManager
03 {
04
05 void CloseOrder();
06 }
You need to decorate the operation as the method that closes the current session.
Which code segment should you insert at line 04?
A. [OperationContract(IsInitiating=false)]
B. [OperationContract(IsTerminating=true)]
C. [OperationContract]
[OperationBehavior(ReleaseInstanceMode=
ReleaseInstanceMode.AfterCall)]
D. [OperationContract(IsTerminating=false)]
[OperationBehavior(ReleaseInstanceMode=
ReleaseInstanceMode.AfterCall)]
Answer: B
Microsoft최신덤프 070-503-Csharp기출문제 070-503-Csharp 070-503-Csharp 070-503-Csharp
NO.13 5. You have successfully created two interfaces: IMyService and IMyServiceClient.
You need to ensure that the service is able to call methods from the client application by using the
IMyServiceClient interface.
Which code segment should you use?
A. [ServiceContract(CallbackContract=typeof(IMyServiceClient))]
public interface IMyService
{
...
}
public interface IMyServiceClient
{
...
}
B. [ServiceContract(CallbackContract=typeof(IMyService))]
public interface IMyService
{
...
}
public interface IMyServiceClient
{
...
}
C. [ServiceContract(SessionMode=SessionMode.Allowed)]
[ServiceKnownType(typeof(IMyServiceClient))]
public interface IMyService : IMyServiceClient
{
...
}
public interface IMyServiceClient
{
...
}
D. [ServiceContract]
[ServiceKnownType(typeof(IMyServiceClient))]
public interface IMyService
{
...
}
[ServiceContract]
public interface IMyServiceClient : ICommunicationObject
{
...
}
Answer: A
Microsoft덤프 070-503-Csharp dumps 070-503-Csharp 070-503-Csharp기출문제 070-503-Csharp
3. You have created a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
The existing service interface is named IMyService, and contains the following code segment.
[ServiceContract(Name="SvcOrder", Namespace="http://contoso.com/services")]
public interface IMyService
{
[OperationContract]
void DoSomething();
}
You create a new service named IMyServiceV1 that contains an operation named DoSomethingElse.
You need to ensure that existing client applications are still able to access the IMyService.DoSomething
method without modifying client code.
Which code segment should you use?
A. [ServiceContract(Namespace="http:?//contoso.com/services/V1")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
B. [ServiceContract(Name="SvcOrder")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
C. [ServiceContract(Name="SvcOrderV1",
Namespace="http: //contoso.com/services")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
D. [ServiceContract(Name="SvcOrder",
Namespace="http: //contoso.com/services")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
Answer: D
Microsoft기출문제 070-503-Csharp pdf 070-503-Csharp 070-503-Csharp
NO.14 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5. The service will expose a method named DoProcess to the client applications.
You write the following code segment. (Line numbers are included for reference only.)
01 [ServiceContract]
02 public interface IMyService
03 {
04
05 }
You need to ensure that the client applications are not required to obtain results from the DoProcess
method.
Which code segment should you insert at line 04?
A. [OperationContract(IsOneWay=true)]
bool DoProcess();
B. [OperationContract(IsOneWay=true)]
void DoProcess();
C. [OperationContract(AsyncPattern=false)]
bool DoProcess();
D. [OperationContract(AsyncPattern=false)]
void DoProcess();
Answer: B
Microsoft기출문제 070-503-Csharp최신덤프 070-503-Csharp 070-503-Csharp dumps
NO.15 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
You create the following service contract.
[ServiceContract]
public interface IMath
{
[OperationContract]
int Add(int num1, int num2);
}
You need to add an operation contract to perform the Add operation asynchronously.
Which operation contract should you use?
A. [OperationContract(AsyncPattern=true)]
IAsyncResult BeginAdd(int num1, int num2);
int EndAdd(IAsyncResult res);
B. [OperationContract]
int BeginAdd(int num1, int num2, AsyncCallback cb, object state);
IAsyncResult EndAdd();
C. [OperationContract]
IAsyncResult BeginAdd(int num1, int num2);
[OperationContract]
int EndAdd(IAsyncResult res);
D. [OperationContract(AsyncPattern=true)]
IAsyncResult BeginAdd(int num1, int num2, AsyncCallback cb, object
state);
int EndAdd(IAsyncResult res);
Answer: D
Microsoft자격증 070-503-Csharp자격증 070-503-Csharp pdf
NO.16 You create a Windows Communication Foundation (WCF) service by using Microsoft .NET Framework
3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 public interface IMyService
02 {
03
04 string ProcessString(string name);
05 }
You create a host for the WCF service. You also create a service endpoint at http://localhost:8080/service.
You add an instance of the HttpTransferEndPointBehavior class to the host.
You need to ensure that the ProcessString method can be invoked from a Web browser by using the URL
http://localhost:8080/service/process name=value
Which code segment should you insert at line 03?
A. [OperationContract(Name="process", Action="Get")]
B. [OperationContract(Name="process", Action="Post")]
C. [OperationContract]
[WebGet(UriTemplate = "process name={name}")]
D. [OperationContract]
[WebInvoke(UriTemplate = "process name={name}")]
Answer: C
Microsoft 070-503-Csharp 070-503-Csharp인증 070-503-Csharp 070-503-Csharp
NO.17 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You create the following service contract. (Line numbers are included for reference only.)
01 [ServiceContract]
02 public interface IMyService
03 {
04 [OperationContract]
05
06 List<string> GetData(int index);
07 }
You need to ensure that the GetData operation can be accessed by using the URI in the following
manner:
ø GetData/1 for the index value 1
ø GetData/2 for the index value 2
ø .
ø .
ø GetData/n for the index value n
Which code segment should you insert at line 05?
A. [WebGet(UriTemplate="GetData/{index}",
?BodyStyle=WebMessageBodyStyle.Bare)]
B. [WebGet(UriTemplate="GetData index={index}",
?BodyStyle=WebMessageBodyStyle.Bare)]
C. [WebGet(UriTemplate="GetData/[index]",
?BodyStyle=WebMessageBodyStyle.Bare)]
D. [WebGet[UriTemplate="GetData index={index}",
?BodyStyle=WebMessageBodyStyle.Bare]]
Answer: A
Microsoft 070-503-Csharp 070-503-Csharp
NO.18 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
The service contains the following code segment.
[DataContract]
public class Person
{
}
[DataContract]
public class Customer : Person
{
}
You need to create a service contract that meets the following requirements:
ø The service contract must have an operation contract named GetPerson that returns an object of type
Person.
ø The GetPerson operation must be able to return an object of type Customer.
Which code segment should you use?
A. [ServiceContract]
[ServiceKnownType("GetPerson")]
public interface IMyService
{
[OperationContract]
Person GetPerson();
}
B. [ServiceContract]
public interface IMyService
{
[OperationContract]
[ServiceKnownType("Customer")]
Person GetPerson();
}
C. [ServiceContract]
[ServiceKnownType(typeof(Customer))]
public interface IMyService
{
[OperationContract]
Person GetPerson();
}
D. [ServiceContract]
[ServiceKnownType("GetPerson",typeof(Customer))]
public interface IMyService
{
[OperationContract]
Person GetPerson();
}
Answer: C
Microsoft인증 070-503-Csharp시험문제 070-503-Csharp 070-503-Csharp
NO.19 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You write the following code segment.
namespace MyServices
{
[ServiceContract()]
interface IManageOrders
{
...
}
}
The service metadata must be exposed at the relative address named meta.
You need to add an endpoint element to the app.config file of the service host.
Which code fragment should you add?
A. <endpoint address="meta" binding="wsHttpBinding"
contract="IManageOrders" />
B. <endpoint address="meta" binding="wsHttpBinding"
contract="MyServices.IMetadataExchange" />
C. <endpoint address="meta" binding="mexHttpBinding"
contract="IMetadataExchange" />
D. <endpoint address="meta" binding="mexHttpBinding"
contract="MyServices.IManageOrders" />
Answer: C
Microsoft dump 070-503-Csharp dumps 070-503-Csharp 070-503-Csharp 070-503-Csharp자료
NO.20 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
ITexamdump의 74-325덤프의 VCE테스트프로그램과 70-466덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HP2-Z26시험에 대비한 고품질 덤프와 000-657시험 최신버전덤프를 제공해드립니다. 최고품질 70-486시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기