ITExamDump의 Oracle인증 1z0-151덤프를 구매하여 공부한지 일주일만에 바로 시험을 보았는데 고득점으로 시험을 패스했습니다.이는ITExamDump의 Oracle인증 1z0-151덤프를 구매한 분이 전해온 희소식입니다. 다른 자료 필요없이 단지 저희Oracle인증 1z0-151덤프로 이렇게 어려운 시험을 일주일만에 패스하고 자격증을 취득할수 있습니다.덤프가격도 다른 사이트보다 만만하여 부담없이 덤프마련이 가능합니다.구매전 무료샘플을 다운받아 보시면 믿음을 느낄것입니다.
우리 ITExamDump사이트에서 제공되는Oracle인증1z0-151시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보면 우리ITExamDump에 믿음이 갈 것입니다. 우리ITExamDump의 제품을 구매하신다고 하면 우리는 최선을 다하여 여러분들한테 최고의 버전을 제공함으로 한번에Oracle인증1z0-151시험을 패스하도록 하겠습니다. IT시험이라고 모두 무조건 외우고 장악하고 많은 시간을 투자해야만 된다는 사상을 깨게 될 것입니다.
Oracle 1z0-151인증시험도 어려울 뿐만 아니라 신청 또한 어렵습니다.Oracle 1z0-151시험은 IT업계에서도 권위가 있고 직위가 있으신 분들이 응시할 수 있는 시험이라고 알고 있습니다. 우리 ITExamDump에서는Oracle 1z0-151관련 학습가이드를 제동합니다. ITExamDump 는 우리만의IT전문가들이 만들어낸Oracle 1z0-151관련 최신, 최고의 자료와 학습가이드를 준비하고 있습니다. 여러분의 편리하게Oracle 1z0-151응시하는데 많은 도움이 될 것입니다.
제일 빠른 시일내에 제일 간단한 방법으로Oracle인증 1z0-151시험을 패스하는 방법이 없냐구요? ITExamDump의Oracle인증 1z0-151덤프를 공부하시면 가능합니다. ITExamDump의Oracle인증 1z0-151덤프는 많은 분들이 검증한 가장 유력한Oracle인증 1z0-151시험공부자료입니다. 덤프의 문제만 기억하시면 패스는 문제없기에 제일 빠른 시일내에 시험을 패스하여 자격증 취득이 가능합니다.
ITExamDump 에서 제공해드리는 Oracle인증1z0-151시험덤프자료를 구입하시면 퍼펙트한 구매후 서비스를 약속드립니다. ITExamDump에서 제공해드리는 덤프는 IT업계 유명인사들이 자신들의 노하우와 경험을 토대로 하여 실제 출제되는 시험문제를 연구하여 제작한 최고품질의 덤프자료입니다. Oracle인증1z0-151시험은ITExamDump 표Oracle인증1z0-151덤프자료로 시험준비를 하시면 시험패스는 아주 간단하게 할수 있습니다. 구매하기전 PDF버전 무료샘플을 다운받아 공부하세요.
Oracle인증 1z0-151시험취득 의향이 있는 분이 이 글을 보게 될것이라 믿고ITExamDump에서 출시한 Oracle인증 1z0-151덤프를 강추합니다. ITExamDump의Oracle인증 1z0-151덤프는 최강 적중율을 자랑하고 있어 시험패스율이 가장 높은 덤프자료로서 뜨거운 인기를 누리고 있습니다. IT인증시험을 패스하여 자격증을 취득하려는 분은ITExamDump제품에 주목해주세요.
시험 번호/코드: 1z0-151
시험 이름: Oracle (Oracle Fusion Middleware 11g: Build Applications with Oracle Forms)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 90 문항
업데이트: 2014-04-24
1z0-151 덤프무료샘플다운로드하기: http://www.itexamdump.com/1z0-151.html
NO.1 View the Exhibit.
The Departments table in the database contains four columns. In a new form, you use the Data
Block
Wizard to add all columns to the block, but in the layout Wizard, you choose all columns except
Location_Id to add to the canvas. The Object Navigator and layout Editor appear as shown in the
Exhibit.
You then decide that you do need to display Location_Id on the canvas.
What object must you select before invoking the Layout Editor in re-entrant mode to make this
change?
A. the text item toolinthe Layout Editor
B. Frame 16ineither the Object Navigator or the layout Editor
C. Canvas4ineither the Object Navigatoror the Layout Editor
D. Location_Idinthe Object Navigator
E. the Departments data blockinthe Object Navigator
Answer: D
Oracle dump 1z0-151 1z0-151시험문제
NO.2 The Orders form has four blocks. The Orders and Order_items block are on the CV_Order
content
canvas; the inventories block items are on the CV_inventories content canvas; and Control block
buttons
are on the CV_Buttons toolbar canvas. All buttons have mouse Navigate set to No.
The Order_Items block is a detail of Orders. The inventories block is a detail of Order_Items,
showing the
stock of the selected product.
There is a button in the Control block with a When-Button-Pressed trigger:
IF GET_CANVAS_PROPERTY(:SYSTEM.cursor_item, item_canvas) = 'CV_ORDER' THEN
GO_BLOCK ('inventories')
ELSE
GO_BLOCK('orders');
END IF;
When you run the form and click the button, navigation does not occur, and the form displays the
runtime
error FRM-41053: Cannot find Canvas: invalid ID.
What should you do to correct this problem?
A. Change the sequence of blocksinthe Object Navigator
B. Chang the Mouse Navigator property of the button to yes
C. inthe first line of code, change the built-into GET_ITEM_PROPERTY
D. inthe first line of code, change the system variable to: SYSTEM.CURSOR_CANVAS.
E. inthe first line of code, change the CV_ORDER to lowercase
F. Chang the argument to the GO_BLOCK built-ins to uppercase
Answer: D
Oracle 1z0-151 1z0-151 1z0-151
NO.3 To avoid overloading the database during busy times, you decide to restrict the queries that
are
executed on the Orders form so that users query by either Order ID or Customer ID during these
times.
Which trigger is most appropriate for the code to enforce this restriction?
A. When-New-Form-instance
B. When-New-Block-instance
C. On-Query
D. Pre-Query
E. Post-Query
Answer: D
Oracle기출문제 1z0-151 1z0-151 1z0-151 1z0-151시험문제 1z0-151
NO.4 You are implementing a JavaBean in a form, the bean has no visible component on the form
when
invoked, the bean displays an input text where users enter a zip code, the bean has a single method
that
returns a short weather forecast for that zip code as a character value.
How can you retrieve that value so that you can display it to the user?
A. Use FBEAN.ENABLE_EVENT to register a listener for the bean event. Obtainthe value of
SYSTEM.CUSTOM_ITEM_EVENTina When-Custom item Event trigger, and then use that value as an
argument to the MESSAGE builtin.
B. Use FBEAN.REGISTER_BEAN as an argument to the MESSAGE builtintoinvoke the bean's method
and return the value as a message displayed to the user.
C. Use FBEAN.REGISTER_BEAN to register the bean, so that when the user enters a zip codeinto the
bean sinput text, the value is automatically displayedinthe bean area item.
D. Use FBEAN.ENABLE_EVENT to register a listener for the bean event. Obtainthe value of
SYSTEM.CUSTOM_EVENT_PARAMETERina When_Custom-item-Event trigger, and then use that
value as an argument to the MESSAGE built-in.
Answer: D
Oracle 1z0-151 1z0-151
NO.5 Which four types of variables must have their names preceded by a colon when they are
referenced in
trigger code?
A. PL/SQL variables
B. Form items
C. global variables
D. system variables
E. parameters
Answer: A,B,C,D
Oracle 1z0-151 dumps 1z0-151 1z0-151시험문제
NO.6 You want to display employee records in tabular format, but the form is not wide enough to
display all
the items in the Employees block. The employee IDs and names of displayed records should always
be
visible, but you want to scroll the additional information as users tab through the Items, the form
should
look like a spreadsheet with the first two columns frozen.
Which canvas types would be most appropriate in this scenario?
A. content canvasina window with a horizontal scroll bar
B. content canvas and multiple tab canvases
C. content canvas and a tab canvas with multiple tab pages
D. content canvas and a stacked canvas with a horizontal scroll bar
E. multiple content canvases
Answer: C
Oracle 1z0-151 pdf 1z0-151 1z0-151시험문제 1z0-151
NO.7 The Credit_Rating item in the Customers block of an Order Entry form must be restricted to
three
possible values: Good, Poor, or Null (the latter value indicates that the credit rating has not been
determined). Order entry clerks must be able to update this item to any of the preceding three
values.
You want to change the item to a check box labeled "Credit Risk" that should be selected if the
customer
has poor credit, the check box should not be selected if the customer's credit rating is good or
undetermined.
You change the item type to Checkbox, set other properties as shown in the Exhibit, and then run
your
form and insert three records: two with good credit and the check box deselected, and one with
poor
credit and the check box selected. You commit the data and query the records, with the following
result
set: The first two records show an undetermined credit rating, although your intention was to set
the value
to Good for these customers.
What change must you make in the properties of the Credit_Ratinq item to enable values of Good,
Poor,
and Null to be entered?
A. Change theinitial Value property to Good.
B. Change the Check Box Mapping of Other Values property to Not Allowed.
C. Change theinitial Value property to Good and the Value When Unchecked property to Null.
D. Change theinitial Value property to Good and the Chock Box Mapping of Other Valued property
to Null.
E. Change theinitial Value property to Good and the Check Box Mapping of Other Values property to
checked.
F. Change the item type. It is not appropriate to use a check box to enable entry and update of more
than
two valuesinan item.
Answer: E
Oracle 1z0-151 1z0-151 1z0-151
NO.8 View the Exhibit.
Iin the Human Resources form shown in the Exhibit, you want to modify the prompts, heights, and
widths
of the Department Id, Manager Id, and Location Id Holds in the Departments data block.
What must you select before invoking the Layout Wizard in reentrant mode to modify these item
properties?
A. Frame5
B. Frames
C. Canvas4
D. the Departments block
E. the DEPARTMENT_ID, MANAGER_ID and LOCATION_ID items
Answer: C
Oracle인증 1z0-151자격증 1z0-151인증 1z0-151 1z0-151자료 1z0-151
NO.9 The Order Entry application contains several forms. The inventories form uses an LOV that is
based on
a record group that queries the Warehouses table to return a warehouse ID.
Several of the forms use LOVs that are based on the same query. You decide to centralize the
creation of
the record group to the entry form of the application, which opens all the other forms, for example,
to open
the inventories form, there is a When-Button Pressed trigger on the inventories button with the
following
code;
OPEN _FORM ('inventories');
in a When-New-Form-instance trigger for the entry form, you create the warehouse_rg record
group by
using the CREATE_GROUP_QUERY built in with the following arguments:
('warehouse_rg' , 'SELECT ALL WAREHOUSE.WAREHOUSE_ID, WAREHOUSE.WAREHOUSE_NAME
FORM WAREHOUSE order by warehouse_name);
You also populate the record group in this trigger.
What must you do to make this record group available to the inventories form and the other forms?
A. inthe When-New-Form-instance trigger for the entry form, add a values for the SCOPE argument
of
CREATE_GROUP_QUERY.
B. inthe entry form, move the record group code to the end of the When-Button-Pressed triggers
for the
buttons that open other forms, so that the record group is created and populated immediately after
OPEN_FORM is called.
C. inthe entry form, move the record group code to the beginning of the When-Button-Pressed
triggers for
the button that open other forms, so that the record group is created and populated just before
OPEN_FORM is called.
D. inthe When-Button_Pressed triggers of the entry from the buttons that open other forms, add a
value
for the SESSION argument of OPEN_FORM.
E. inthe other forms, refer to the record group as: global.warehouse_rg.
Answer: A
Oracle 1z0-151 1z0-151덤프 1z0-151
NO.10 You have a text item in your form named Object1. You want to create Object2 as an exact
duplicate of
Object1. You want to be able to change the properties of Object2. However if you change Object1,
you do
not want Object2 to change.
Which method of reusing Object1 would be best for these requirements?
A. Copying Object1
B. Subclassing Object1
C. Creating a property class from Object1
D. Putting Object1inan Object library
E. Referencing Object1ina PL/SQL library
Answer: A
Oracle dumps 1z0-151최신덤프 1z0-151시험문제 1z0-151 pdf 1z0-151
NO.11 When tabbing through items in the Employees form, users should not be able to navigate to
the Salary
text item. If they need to update the item, they will have to explicitly navigate to it by using the
mouse.
Which property setting accomplishes this requirement.?
A. Enabled = Yes; Keyboard Navigable = No
B. Enabled = No; Keyboard Navigable = Yes
C. Enabled = Yes; Keyboard Navigable = Yes
D. Enabled = No; Keyboard Navigable = No
E. Automatic Skip = Yes
Answer: C
Oracle 1z0-151 1z0-151 1z0-151최신덤프
NO.12 You have created a complex menu structure with several types of menu objects. To which
objects
would you assign menu commands?
A. mainmenus
B. individual menus
C. submenus
D. menu items
E. all of the above
Answer: E
Oracle 1z0-151기출문제 1z0-151최신덤프 1z0-151
NO.13 In Forms Builder, the iconic buttons on the form are blank, but when you click Run Form the
form
appears in the browser with Images in the iconic buttons.
What are two things that you can check to track the source of this problem?
A. forms Builder runtime preferences
B. the UI_ICON settinginthe operating system
C. the iconpath settinginthe Forms registry file
D. the UI_ICOM_EXTENSION settinginthe operating system
E. the iconextension settinginthe Forms registry file
F. the FORMS_PATH settinginthe Forms environment file
G. the classpath settinginthe operating system
Answer: B,C
Oracle 1z0-151최신덤프 1z0-151 dumps 1z0-151
NO.14 You have created an editor named MyEditor, and you want it to be available to edit the text
item
Product_Description. You can associate the editor with the text item by setting the Editor property
of
Product_Description to MyEditor.
A. True
B. False
Answer: A
Oracle 1z0-151 1z0-151자격증
NO.15 The Orders database table uses Order_id as its primary key. You have written the following
code to use
in the Orders block of a form:
SELECT orders_seq.NEXTVAL
INTO :orders.order_id
FROM SYS.dual;
Which statement is true about this code?
A. If you place thisCodeina trigger that fires when the record isinsertedinto the database, you will
likely
have more gapsinOrderIDs than if you use the sequence as a default value for the item.
B. If you place this codeina trigger, you should ensure that Order_Id hasitsrequiredproperty set to
Yes.
C. If you place this codeina trigger, you should ensure that Order_Id has its Database Item property
set to
No.
D. If the named sequence does not exist, it is automatically created the first time the code is called.
E. You should place this code aina database trigger to minimize the gapsinOrder IDs.
F. You should place this codeinPre-insert trigger to minimize the gapsinOrder IDs.
G. You should place this codeina Post_insert trigger to minimize the gapsinOrder IDs.
Answer: F
Oracle 1z0-151 1z0-151
ITexamdump의 NS0-504덤프의 VCE테스트프로그램과 C_TSCM42_65덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 MB2-703시험에 대비한 고품질 덤프와 00M-653시험 최신버전덤프를 제공해드립니다. 최고품질 JN0-730시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기