여러분은Citrix 1Y0-A11인증시험을 패스함으로 IT업계관련 직업을 찿고자하는 분들에게는 아주 큰 가산점이 될수 있으며, 성덩한 IT업계사업자와 한걸음 가까와 집니다.
ITExamDump에서 제공해드리는 Citrix인증 1Y0-A11덤프는 가장 출중한Citrix인증 1Y0-A11시험전 공부자료입니다. 덤프품질은 수많은 IT인사들로부터 검증받았습니다. Citrix인증 1Y0-A11덤프뿐만아니라 ITExamDump에서는 모든 IT인증시험에 대비한 덤프를 제공해드립니다. IT인증자격증을 취득하려는 분들은ITExamDump에 관심을 가져보세요. 구매의향이 있으시면 할인도 가능합니다. 고득점으로 패스하시면 지인분들께 추천도 해주실거죠?
ITExamDump의 Citrix 인증 1Y0-A11시험덤프공부자료는 pdf버전과 소프트웨어버전 두가지 버전으로 제공되는데 Citrix 인증 1Y0-A11실제시험예상문제가 포함되어있습니다.덤프의 예상문제는 Citrix 인증 1Y0-A11실제시험의 대부분 문제를 적중하여 높은 통과율과 점유율을 자랑하고 있습니다. ITExamDump의 Citrix 인증 1Y0-A11덤프를 선택하시면 IT자격증 취득에 더할것 없는 힘이 될것입니다.
ITExamDump는 여러분의 요구를 만족시켜드리는 사이트입니다. 많은 분들이 우리사이트의 it인증덤프를 사용함으로 관련it시험을 안전하게 패스를 하였습니다. 이니 우리 ITExamDump사이트의 단골이 되었죠. ITExamDump에서는 최신의Citrix 1Y0-A11자료를 제공하며 여러분의Citrix 1Y0-A11인증시험에 많은 도움이 될 것입니다.
많은 분들이 고난의도인 IT관련인증시험을 응시하고 싶어 하는데 이런 시험은 많은 전문적인 IT관련지식이 필요합니다. 시험은 당연히 완전히 전문적인 IT관련지식을 터득하자만이 패스할 가능성이 높습니다. 하지만 지금은 많은 방법들로 여러분의 부족한 면을 보충해드릴 수 있으며 또 힘든 IT시험도 패스하실 수 있습니다. 혹은 여러분은 전문적인 IT관련지식을 터득하자들보다 더 간단히 더 빨리 시험을 패스하실 수 있습니다.
시험 번호/코드: 1Y0-A11
시험 이름: Citrix (Basic Administration for Citrix NetScaler 9.0)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 86 문항
업데이트: 2014-04-03
1Y0-A11 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Y0-A11.html
NO.1 An administrator configured cache redirection and needs to provide a report of how that feature is
functioning in the network environment. What can the administrator use to see a graphical representation
of the statistics for the vserver performing the cache redirection?
A.The monitor view for the service bound to the correct vserver
B.The chart option in the Dashboard once the correct vserver is selected
C.The chart option in the Dashboard for the service bound to the correct vserver
D.The request and response rates option in the Dashboard once te correct vserver is selected
Answer:B
Citrix자료 1Y0-A11 1Y0-A11자료 1Y0-A11자격증 1Y0-A11덤프
NO.2 A company is planning on implementing NetScaler systems in high availability pairs. Which entry in the
NS.CONF file of the secondary system needs to be unique from those of the primary system?
A.VMAC
B.VIP address
C.MIP address
D.NSIP address
Answer:D
Citrix dump 1Y0-A11 dumps 1Y0-A11 1Y0-A11 1Y0-A11 dumps 1Y0-A11
NO.3 Scenario: An administrator is planning the necessary configurations on a NetScaler system for an
environment that requires the NetScaler system to advertise virtual IP addresses, directly connected
routes and static routes on the upstream routers. What must the administrator ensure is configured on the
NetScaler system for this environment?
A.Static Routes
B.Link Load Balancing
C.Route Health Injection
D.Front-end Health Check
Answer:C
Citrix덤프 1Y0-A11 1Y0-A11인증 1Y0-A11시험문제
NO.4 Scenario: A network administrator is deploying a NetScaler system in an environment with a single
subnet using this IP information: subnet: 192.168.10.32 netmask: 255.255.255.224 default gateway:
192.168.10.40 The administrator already set up the NSIP and MIP addresses using the command line
interface. Which command could the administrator use to complete this set up successfully?
A.add route 0.0.0.0 0.0.0.0 192.168.10.32
B.add route 0.0.0.0 0.0.0.0 192.168.10.40
C.add route 0.0.0.0 0.0.0.0 192.168.10.62
D.add route 192.168.10.0 255.255.255.224 192.168.10.32
E.add route 192.168.10.0 255.255.255.224 192.168.10.62
Answer:B
Citrix자격증 1Y0-A11 1Y0-A11 dump
NO.5 Scenario: An administrator is planning on configuring health checks for services bound to web servers 1
and 2 which are listening on TCP port 80 for HTTP and TCP port 443 for HTTPS. Service1 receives the
encrypted traffic and Service 2 receives the clear text traffic. How should the administrator create the
monitor for Service1 using the command line interface?
A.set mon monitor-SVC1-Mon TCP -secure YES
B.add lb mon monitor-SVC1-Mon HTTP -secure YES
C.set mon monitor-SVC1-Mon HTTP -transparent NO
D.add lb mon monitor-SVC1-Mon TCP -transparent NO
Answer:B
Citrix pdf 1Y0-A11 pdf 1Y0-A11시험문제 1Y0-A11 1Y0-A11자격증
NO.6 A NetScaler system is running with high CPU usage frequently. Which log can the administrator view
to determine if the high CPU is being caused by the processes running in the user space?
A.syslog
B.nswlog
C.newnslog
D.nsconmsg
Answer:C
Citrix 1Y0-A11기출문제 1Y0-A11 1Y0-A11인증
NO.7 Which event would trigger a failover in a high availability pair?
A.The primary appliance reboots.
B.A forced synchronization event fails.
C.A monitored interface fails on the secondary node.
D.The default gateway does not return a heartbeat packet from the primary node.
Answer:A
Citrix 1Y0-A11 pdf 1Y0-A11자료 1Y0-A11
NO.8 An administrator should configure Link Aggregation on a 7000 NetScaler system when __________.
(Choose the correct option to complete the sentence.)
A.redundancy on a half duplex operation is required
B.redundancy on an operation across multiple data rates is required
C.the bandwidth requirements inbound to or outbound from the Netscaler are greater than 1 Gb/sec
D.the bandwidth requirements inbound to or outbound from the Netscaler are greater than 8 Gb/sec
Answer:C
Citrix자격증 1Y0-A11 1Y0-A11최신덤프 1Y0-A11최신덤프
NO.9 Scenario: An administrator needs to create a health check that will mark an HTTP service down if the
bound monitor probe fails. The administrator wants to create a monitor and configure the health check so
that a trap is sent if the monitor probe reply exceeds 20 milliseconds. How can the administrator create
the monitor for this health check using the command line interface?
A.set mon monitor-HTTP-1 HTTP -interval 20 milli
B.add lb mon monitor-HTTP-1 HTTP -interval 20 milli
C.set mon monitor-HTTP-1 HTTP -resptimeout 20 milli
D.add lb mon monitor-HTTP-1 HTTP -resptimeout 20 milli
Answer:D
Citrix인증 1Y0-A11기출문제 1Y0-A11 dump 1Y0-A11최신덤프 1Y0-A11 pdf
NO.10 Scenario: An administrator installed a NetScaler system and configured the NSIP and MIP for the
system. The NetScaler system will be used primarily for load balancing in this environment. Which
additional step must the administrator take to ensure that the NetScaler system can perform the
necessary server load balancing in this environment?
A.Disable USIP mode on both nodes
B.Use the MIP as the NSIP for a high availability environment
C.Create VIPs for the front-end connections to the back-end servers
D.Enable USNIP mode for the front-end connections to the back-end servers
Answer:C
Citrix 1Y0-A11자격증 1Y0-A11인증 1Y0-A11
NO.11 The primary node of a NetScaler high availability (HA) pair failed over immediately at start up during
the initial testing of the system. Which configuration step can the administrator take to prevent this from
happening again?
A.Disable monitoring on all connected interfaces
B.Enable node monitoring on all primary node interfaces
C.Run the "force HA sync" command from the primary node
D.Execute the "disable interface" command for all unused interfaces
Answer:D
Citrix 1Y0-A11 1Y0-A11시험문제 1Y0-A11 dumps
NO.12 Scenario: An administrator set up a NetScaler system in a one-arm mode configuration with high
availability. The system failed over unexpectedly. Which two occurences could be causing this issue?
(Choose two.)
A.An interface is down
B.Layer 2 mode is disabled
C.An SSL acceleration card is down
D.The heartbeat is being sent every two seconds
Answer:A C
Citrix 1Y0-A11자료 1Y0-A11자격증 1Y0-A11 1Y0-A11
NO.13 Scenario: A multinational company operates in areas where there is significant threat of natural
disaster. The administrator decides to create redundancy in their network because of a continuous power
outage threat at the South America site. The company also has two sites in North America, one near New
York and the other near the San Andreas fault line, a site of frequent earthquakes and tremors. The
company also has a site in Tokyo, Japan, which experiences several natural disaster threats. The
company plans to use a NetScaler system for load balancing and to prevent interruption of network
services because of a local natural or human disaster. Would a high availability (HA) deployment resolve
the issue described in the scenario, and if so, how should the HA nodes be paired? Click the Task button
to answer. Click the Exhibit button for instructions on how to complete a Drag and Drop item. Answer &
Explanation Correct Answer Explanations No more information available
Answer:
NO.14 An SNMP manager attempted to poll for an OID but received the error message: "response timeout."
Which option could the administrator have misconfigured for SNMPv2 to cause this error message?
A.SNMP trap
B.SNMP user
C.SNMP group
D.SNMP community
Answer:D
Citrix인증 1Y0-A11덤프 1Y0-A11
NO.15 An administrator has just enabled caching and wants to make sure that this will positively impact server
performance. Which information can the administrator get from the Dashboard to determine whether
server performance was positively affected by enabling caching?
A.Client connection count increases
B.Server side request rate increases
C.Client connection count decreases
D.Server side request rate decreases
Answer:D
Citrix 1Y0-A11인증 1Y0-A11 1Y0-A11자격증
NO.16 Scenario: An administrator must set up a NetScaler system network with USIP mode enabled. The
NetScaler must be able to preserve client IP addresses in TCP/IP packets reaching the back-end servers
except for connections coming from particular IP addresses that are defined in an ACL. In the case of
connections coming from the IP addresses defined in the ACL, the packets reaching the back-end servers
should receive the NetScaler IP address instead of the client IP address. On which entity should RNAT be
configured to meet the requirements in this scenario according to best practices?
A.ACL
B.Client
C.Virtual server
D.Back-end server
Answer:A
Citrix시험문제 1Y0-A11자료 1Y0-A11 dumps
NO.17 An administrator notices that the CPU usage on a NetScaler system spikes for aproximately one
minute every two days. Which step can the administrator take to find out what is causing the spike?
A.View the syslog
B.Run events on newnslog
C.View the Dashboard statistics
D.Run the stat ns node command
Answer:B
Citrix덤프 1Y0-A11자료 1Y0-A11 1Y0-A11자료
NO.18 Where in the configuration utility can an administrator configure a NetScaler high availability pair to
ensure that specific interfaces are NOT monitored?
A.The root of the System node
B.The root of the Network node
C.The interface sub node in the System node
D.The interface sub node in the Network node
Answer:D
Citrix 1Y0-A11기출문제 1Y0-A11 1Y0-A11인증
NO.19 Which SNMP trap must an administrator configure to be informed when the response time for a monitor
probe that had exceeded the set threshold returns to normal?
A.entityup
B.entitydown
C.monRespTimeoutAboveThresh
D.monRespTimeoutBelowThresh
Answer:D
Citrix dumps 1Y0-A11최신덤프 1Y0-A11 1Y0-A11 pdf
NO.20 How can an administrator configure a health check for a server receiving HTTP traffic so that it monitors
the responses of the server to actual client requests as opposed to probes whenever possible?
A.Use the default TCP monitor
B.Configure an HTTP-ECV monitor
C.Configure an HTTP-Inline monitor
D.Use the TCP monitor with the transparent parameter selected
E.Configure an HTTP monitor with the transparent parameter selected
Answer:C
Citrix인증 1Y0-A11 1Y0-A11덤프 1Y0-A11 dump 1Y0-A11
ITexamdump의 1z0-593덤프의 VCE테스트프로그램과 640-722덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 MB6-870시험에 대비한 고품질 덤프와 70-462시험 최신버전덤프를 제공해드립니다. 최고품질 70-341시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기