ITExamDump 덤프로 시험준비하여 고득점으로 자격증을 따보세요.: Juniper

레이블이 Juniper인 게시물을 표시합니다. 모든 게시물 표시

2014년 6월 16일 월요일

JN0-541자격증자료, JN0-330 Dumps, JN0-311자격증시험자료

IT업계에 종사하시는 분들은 IT인증시험을 통한 자격증취득의 중요성을 알고 계실것입니다. ITExamDump에서 제공해드리는 인증시험대비 고품질 덤프자료는 제일 착한 가격으로 여러분께 다가갑니다. ITExamDump덤프는 IT인증시험에 대비하여 제작된것으로서 높은 적중율을 자랑하고 있습니다.덤프를 구입하시면 일년무료 업데이트서비스, 시험불합격시 덤프비용환불 등 퍼펙트한 서비스도 받을수 있습니다.

ITExamDump 의 Juniper인증 JN0-330시험에 도전장을 던지셨나요? 현황에 만족하지 않고 열심히 하는 모습에 박수를 보내드립니다. Juniper인증 JN0-330시험을 학원등록하지 않고 많은 공부자료 필요없이ITExamDump 에서 제공해드리는 Juniper인증 JN0-330덤프만으로도 가능합니다. 수많은 분들이 검증한Juniper인증 JN0-330덤프는 시장에서 가장 최신버전입니다.가격도 친근하구요.

ITExamDump의 연구팀에서는Juniper JN0-311인증덤프만 위하여 지금까지 노력해왔고 ITExamDump 학습가이드Juniper JN0-311덤프로 시험이 어렵지 않아졌습니다. ITExamDump는 100%한번에Juniper JN0-311이장시험을 패스할 것을 보장하며 우리가 제공하는 문제와 답을 시험에서 백프로 나올 것입니다.여러분이Juniper JN0-311시험에 응시하여 우리의 도움을 받는다면 ITExamDump에서는 꼭 완벽한 자료를 드릴 것을 약속합니다. 또한 일년무료 업데이트서비스를 제공합니다.즉 문제와 답이 갱신이 되었을 경우 우리는 여러분들한테 최신버전의 문제와 답을 다시 보내드립니다.

ITExamDump는 믿을 수 있는 사이트입니다. IT업계에서는 이미 많이 알려져 있습니다. 그리고 여러분에 신뢰를 드리기 위하여 Juniper 인증JN0-311 관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있게 제공합니다. 아주 만족할 것이라고 믿습니다. ITExamDump제품에 대하여 아주 자신이 있습니다. Juniper 인증JN0-311 도 여러분의 무용지물이 아닌 아주 중요한 자료가 되리라 믿습니다. 여러분께서는 아주 순조로이 시험을 패스하실 수 있을 것입니다.

시험 번호/코드: JN0-541
시험 이름: IDP, Associate(JNCIA-IDP)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 JN0-541기출문제
100% 합격율 보장
Q&A: 230 문항 JN0-541시험후기
업데이트: 2014-06-15

JN0-541기출문제: >>펼쳐보기

시험 번호/코드: JN0-330
시험 이름: JN0-330-Enhanced Services, Specialist(JNCIS-ES)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 JN0-330자격시험
100% 합격율 보장
Q&A: 150 문항 JN0-330시험자료
업데이트: 2014-06-15

JN0-330자격시험: >>펼쳐보기

시험 번호/코드: JN0-311
시험 이름: WX, Associate(JNCIA-WX)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 JN0-311교재
100% 합격율 보장
Q&A: 123 문항 JN0-311덤프
업데이트: 2014-06-15

JN0-311교재: >>펼쳐보기

여러분은 먼저 우리 ITExamDump사이트에서 제공되는Juniper인증JN0-330시험덤프의 일부분인 데모를 다운받으셔서 체험해보세요. ITExamDump는 여러분이 한번에Juniper인증JN0-330시험을 패스하도록 하겠습니다. 만약Juniper인증JN0-330시험에서 떨어지셨다고 하면 우리는 덤프비용전액 환불입니다.

만약 시험만 응시하고 싶으시다면 우리의 최신Juniper JN0-541자료로 시험 패스하실 수 있습니다. ITExamDump 의 학습가이드에는Juniper JN0-541인증시험의 예상문제, 시험문제와 답 임으로 100% 시험을 패스할 수 있습니다.우리의Juniper JN0-541시험자료로 충분한 시험준비하시는것이 좋을것 같습니다. 그리고 우리는 일년무료 업데이트를 제공합니다.

우선 우리ITExamDump 사이트에서Juniper JN0-541관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다.체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump에서 제공하는Juniper JN0-541덤프로 시험 준비하시면 편안하게 시험을 패스하실 수 있습니다.

JN0-330 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-330.html

NO.1 Using a policy with the policy-rematch flag enabled, what happens to the existing and new sessions
when you change the policy action from permit to deny?
A. The new sessions matching the policy are denied. The existing sessions are dropped.
B. The new sessions matching the policy are denied. The existing sessions, not being allowed to carry
any traffic, simply timeout.
C. The new sessions matching the policy might be allowed through if they match another policy. The
existing sessions are dropped.
D. The new sessions matching the policy are denied. The existing sessions continue until they are
completed or their timeout is reached.
Answer:A

Juniper자료   JN0-330최신버전덤프   JN0-330시험문제   JN0-330 Dumps   JN0-330인증덤프   JN0-330교재

NO.2 Which statement is true about interface-based static NAT?
A. It also supports PAT.
B. It requires you to configure address entries in the junos-nat zone.
C. It requires you to configure address entries in the junos-global zone.
D. The IP addresses being translated must be in the same subnet as the incoming interface.
Answer: D

Juniper Dumps   JN0-330   JN0-330기출문제   JN0-330덤프   JN0-330교재

NO.3 Which two are components of the JUNOS software's routing policy? (Choose two.)
A. route-map
B. prefix-list
C. distribute-list
D. policy-statement
Answer: BD

Juniper   JN0-330시험문제   JN0-330   JN0-330 dump

NO.4 You are not able to telnet to the interface IP of your JUNOS software with enhanced services device
from a PC on the same subnet. What is causing the problem?
A. Telnet is not being permitted by self policy.
B. Telnet is not being permitted by security policy.
C. Telnet is not allowed because it is not considered secure.
D. Telnet is not enabled as a host-inbound service on the zone.
Answer: D

Juniper시험자료   JN0-330   JN0-330덤프다운   JN0-330자격시험

NO.5 A route-based VPN is required for which scenario?
A. when the remote VPN peer is behind a NAT device
B. when multiple networks need to be reached across the tunnel
C. when the remote VPN peer is a dialup or remote access client
D. when a dynamic routing protocol such as OSPF is required across the VPN
Answer: D

Juniper최신덤프   JN0-330시험후기   JN0-330

NO.6 Users can define policy to control traffic flow between which two components? (Choose two.)
A. from a zone to the router itself
B. from a zone to the same zone
C. from a zone to a different zone
D. from one interface to another interface
Answer: BC

Juniper시험정보   JN0-330 IT덤프   JN0-330시험일정   JN0-330

NO.7 Click the Exhibit button.
Based on the configuration shown in the exhibit, what will happen to the traffic matching the security
policy?
A. The traffic is permitted through the myTunnel IPSec tunnel only on Tuesdays.
B. The traffic is permitted through the myTunnel IPSec tunnel daily, with the exception of Mondays.
C. The traffic is permitted through the myTunnel IPSec tunnel all day on Mondays, Wednesdays between
7:00 am and 6:00 pm, and Thursdays between 7:00 am and 6:00 pm.
D. The traffic is permitted through the myTunnel IPSec tunnel all day on Mondays, Wednesdays between
6:01 pm and 6:59 am, and Thursdays between 6:01 pm and 6:59 am.
Answer: C

Juniper IT자격증   JN0-330최신덤프   JN0-330최신덤프   JN0-330시험후기

NO.8 Click the Exhibit button.
Which type of source NAT is configured in the exhibit?
A. static source pool
B. interface source pool
C. source pool with PAT
D. souce pool without PAT
Answer:A

Juniper IT국제자격증   JN0-330   JN0-330최신덤프   JN0-330 IT시험덤프   JN0-330 IT자격증시험자료

2013년 12월 17일 화요일

Juniper 자격증 JN0-541 시험문제와 답

인터넷에는Juniper인증 JN0-541시험대비공부자료가 헤아릴수 없을 정도로 많습니다.이렇게 많은Juniper인증 JN0-541공부자료중 대부분 분들께서 저희ITExamDump를 선택하는 이유는 덤프 업데이트가 다른 사이트보다 빠르다는 것이 제일 큰 이유가 아닐가 싶습니다. ITExamDump의 Juniper인증 JN0-541덤프를 구매하시면 덤프가 업데이트되면 무료로 업데이트된 버전을 제공받을수 있습니다.

Juniper인증 JN0-541 시험은 최근 제일 인기있는 인증시험입니다. IT업계에 종사하시는 분들은 자격증취득으로 자신의 가치를 업그레이드할수 있습니다. Juniper인증 JN0-541 시험은 유용한 IT자격증을 취득할수 있는 시험중의 한과목입니다. ITExamDump에서 제공해드리는Juniper인증 JN0-541 덤프는 여러분들이 한방에 시험에서 통과하도록 도와드립니다. 덤프를 공부하는 과정은 IT지식을 더 많이 배워가는 과정입니다. 시험대비뿐만아니라 많은 지식을 배워드릴수 있는 덤프를ITExamDump에서 제공해드립니다. ITExamDump덤프는 선택하시면 성공을 선택한것입니다.

현재 경쟁울이 심한IT시대에,Juniper JN0-541자격증 취득만으로 이 경쟁이 심한 사회에서 자신만의위치를 보장할수 있고 더욱이는 한층업된 삶을 누릴수 있을수도 있습니다. 우리ITExamDump 에서 여러분은Juniper JN0-541관련 학습지도서를 얻을 수 있습니다. 우리ITExamDump는 IT업계엘리트 한 강사들이 퍼펙트한Juniper JN0-541문제집을 만들어서 제공합니다. 우리가 제공하는Juniper JN0-541문제와 답으로 여러분은 한번에 성공적으로 시험을 패스 하실수 있습니다. 중요한것 저희 문제집을 선택함으로 여러분의 시간도 절약해드리고 무엇보다도 많은 근심없이 심플하게 시험을 패스하여 좋다는 점입니다.

Juniper인증 JN0-541시험을 등록했는데 마땅한 공부자료가 없어 고민중이시라면ITExamDump의Juniper인증 JN0-541덤프를 추천해드립니다. ITExamDump의Juniper인증 JN0-541덤프는 거의 모든 시험문제를 커버하고 있어 시험패스율이 100%입니다. ITExamDump제품을 선택하시면 어려운 시험공부도 한결 가벼워집니다.

Juniper JN0-541인증시험을 어떻게 준비하면 될가 아직도 고민하고 계시죠? 학원에 등록하자니 시간도 없고 돈도 많이 들고 쉽게 엄두가 나지 않는거죠? ITExamDump제품을 구매하신다면 그런 부담을 이제 끝입니다. ITExamDump덤프는 더욱 가까지 여러분들께 다가가기 위하여 그 어느 덤프판매 사이트보다 더욱 저렴한 가격으로 여러분들을 맞이하고 있습니다. Juniper JN0-541덤프는ITExamDump제품이 최고랍니다.

시험 번호/코드: JN0-541
시험 이름: Juniper (IDP, Associate(JNCIA-IDP))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 230 문항
업데이트: 2013-12-16

JN0-541 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-541.html

NO.1 A newly re-imaged sensor is running IDP 4.0 code. You want to assign IP address
10.1.1.1 to the sensor. Which method do you use to do this?
A. Connect to the sensor's console port, login as root, and answer theEasyConfig
B. Use SSH to connect to the sensor at IP 192.168.1.1.Login as root, and run ipconfig.
C. Connect to the sensor's console port, login as admin, and answer theEasyConfig
D. Use SSH to connect to the sensor at IP 192.168.1.1.Login as admin, and run ipconfig.
Answer: A

Juniper자료   JN0-541   JN0-541최신덤프   JN0-541시험문제   JN0-541

NO.2 On a sensor, which command will indicate if log messages are being sent to Security Manager.?
A. scio vr list
B. serviceidp status
C. scio agentstats display
D. scio getsystem
Answer: C

Juniper   JN0-541   JN0-541 dump   JN0-541   JN0-541   JN0-541자격증

NO.3 Which statement is true about packet capture in the IDP sensor?
A. The Log Viewer has no indication of whether a log message has associated packet captures.
B. You can only log packets after an attack packet.
C. You can configure a particular number of packets to capture before and after an attack.
D. Packet capture records all packets flowing through the sensor.
Answer: C

Juniper   JN0-541   JN0-541 dumps   JN0-541자격증   JN0-541

NO.4 Which TCP port is used for communication between Security Manager and an IDP sensor?
A. 7801
B. 7800
C. 7803
D. 443
Answer: C

Juniper   JN0-541최신덤프   JN0-541자료   JN0-541

NO.5 Which rule base would detect netcat?
A. SYN protector
B. traffic anomalies
C. backdoor
D. exempt
Answer: C

Juniper덤프   JN0-541   JN0-541   JN0-541덤프   JN0-541기출문제

NO.6 Which statement is true regarding IDP rule matching on a sensor?
A. Each rule in the IDP rule base that matches on the source IP, destination IP, and service will be
processed further.
B. Each rule in the IDP rule base that matches on the source IP, destination IP, and service will be
processed further, unless the particular rule is terminal.
C. Each rule in the IDP rule base that matches on the source IP, destination IP, service, and attack object
will be processed further.
D. Each rule in the IDP rule base that matches on the source IP, destination IP, service, and attack object
will be processed further, unless the particular rule is terminal.
Answer: B

Juniper dump   JN0-541   JN0-541   JN0-541   JN0-541 pdf   JN0-541 pdf

NO.7 Which three fields in a packet must match an IDP rule before that packet is examined for an attack?
(Choose three.)
A. terminate match
B. service
C. destination address
D. source address
E. attack object
Answer: B,C,D

Juniper시험문제   JN0-541덤프   JN0-541   JN0-541인증

NO.8 You update your attack object database on Security Manager. What must you do before the new attack
objects become active on the IDP sensors?
A. You install the updated security policy on the IDP sensor.
B. No changes are required.
C. You must restart the IDP sensor.
D. You must restart the IDP processes on the IDP sensors.
Answer: A

Juniper   JN0-541   JN0-541   JN0-541덤프   JN0-541인증

NO.9 After you enable alerts for new hosts that are detected by the Enterprise Security Profiler, where do you
look in Security Manager to see those alerts?
A. Security Monitor > Profiler > Application Profiler tab
B. Security Monitor > Profiler > Violation Viewer tab
C. Security Monitor > Profiler > Network Profiler tab
D. Log Viewer > Profiler Log
Answer: D

Juniper pdf   JN0-541 dumps   JN0-541최신덤프   JN0-541   JN0-541최신덤프

NO.10 Which statement is true about the attack object database update process?
A. Each sensor updates its own attack object database automatically; however they must be able to
access the Juniper site on TCP port 443.
B. The attack object database update must be manually performed by the administrator, and the
administrator must manually install it on each sensor.
C. The attack object database update can be initiated manually or automatically.
D. The attack object database update can be automatically scheduled to occur using the Security
Manager GUI.
Answer: C

Juniper   JN0-541기출문제   JN0-541

NO.11 When connecting to a sensor using SSH, which account do you use to login?
A. admin
B. super
C. netscreen
D. root
Answer: A

Juniper시험문제   JN0-541   JN0-541   JN0-541자격증

NO.12 Which OSI layer(s) of a packet does the IDP sensor examine?
A. layers 2-7
B. layers 2-4
C. layer 7 only
D. layers 4-7
Answer: A

Juniper   JN0-541   JN0-541   JN0-541시험문제   JN0-541 dump

NO.13 Which type of cable do you use for a console connection to an IDP sensor?
A. CAT 5 cable
B. Juniper proprietary cable
C. straight-through serial cable
D. null-modem cable
Answer: D

Juniper인증   JN0-541   JN0-541   JN0-541시험문제   JN0-541인증

NO.14 Which rule base would detect the use of nmap on a network?
A. SYN protector
B. traffic anomalies
C. backdoor
D. exempt
Answer: B

Juniper시험문제   JN0-541시험문제   JN0-541 dumps   JN0-541시험문제   JN0-541자료   JN0-541기출문제

NO.15 What is one use of an IP action?
A. It blocks subsequent connections from specific IP addresses.
B. It modifies the IP header to redirect the attack.
C. It modifies the IP header to prevent the attack.
D. It permits or denies the traffic, based on the IP header.
Answer: A

Juniper덤프   JN0-541시험문제   JN0-541 pdf   JN0-541자격증   JN0-541시험문제

NO.16 What is "a deviation from a protocol's expected behavior or packet format"?
A. context
B. compound attack object
C. attack signature
D. protocol anomaly
Answer: D

Juniper덤프   JN0-541   JN0-541   JN0-541인증

NO.17 Which two will change the management IP of an IDP sensor? (Choose two.)
A. Edit the existing IDP sensor object in Security Manager GUI and change the IP address.
B. Delete the IDP sensor object from Security Manager and re-add the sensor with the new IP address.
C. Useifconfig to change the management IP address.
D. Use the ACM to change the management IP address.
Answer: B,D

Juniper   JN0-541   JN0-541   JN0-541 dump

NO.18 Which statement about the Enterprise Security Profiler (ESP) is true?
A. The ESP must be configured and started using the IDP sensor CLI before it is used.
B. The administrator must manually initiate Security Manager to sensor polling to retrieve ESP data.
C. The ESP must be configured and started on each IDP sensor manually, using the Security Manager
GUI.
D. The ESP is started by default in IDP version 4.0 or newer.
Answer: C

Juniper   JN0-541자료   JN0-541 dumps   JN0-541최신덤프   JN0-541 dumps

NO.19 Exhibit:
You work as an administrator at Certkiller .com. Study the exhibit carefully. In the exhibit, which SYN
protector mode is the IDP using?
A. passive
B. handshake
C. relay
D. protective
Answer: A

Juniper   JN0-541 dump   JN0-541 dump   JN0-541기출문제

NO.20 Which command on the IDP sensor CLI can be used to display the sensor statistics, which policy is
installed, and mode of sensor deployment?
A. sctop "s" option
B. sensor statistics can only be displayed from Security Manager GUI
C. scio list s0 sensor stat
D. scio sensor stat
Answer: A

Juniper자료   JN0-541   JN0-541   JN0-541시험문제

ITexamdump의 70-484덤프의 VCE테스트프로그램과 LOT-441덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-588시험에 대비한 고품질 덤프와 LOT-958시험 최신버전덤프를 제공해드립니다. 최고품질 EN0-001시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-541.html

JN0-120 덤프 Juniper 자격증 덤프

ITExamDump의 Juniper인증 JN0-120덤프를 구매하시고 공부하시면 밝은 미래를 예약한것과 같습니다. ITExamDump의 Juniper인증 JN0-120덤프는 고객님이 시험에서 통과하여 중요한 IT인증자격증을 취득하게끔 도와드립니다. IT인증자격증은 국제적으로 인정받기에 취직이나 승진 혹은 이직에 힘을 가해드립니다. 학원공부나 다른 시험자료가 필요없이ITExamDump의 Juniper인증 JN0-120덤프만 공부하시면Juniper인증 JN0-120시험을 패스하여 자격증을 취득할수 있습니다.

ITExamDump에서 제공하는 제품들은 품질이 아주 좋으며 또 업뎃속도도 아주 빠릅니다 만약 우리가제공하는Juniper JN0-120인증시험관련 덤프를 구매하신다면Juniper JN0-120시험은 손쉽게 성공적으로 패스하실 수 있습니다.

ITExamDump에서 최고최신버전의Juniper인증JN0-120시험덤프 즉 문제와 답을 받으실 수 있습니다. 빨리 소지한다면 좋겠죠. 그래야 여러분은 빨리 한번에Juniper인증JN0-120시험을 패스하실 수 있습니다.Juniper인증JN0-120관련 최고의 자료는 현재까지는ITExamDump덤프가 최고라고 자신 있습니다.

Juniper JN0-120인증시험에 응시하고 싶으시다면 좋은 학습자료와 학습 가이드가 필요합니다.Juniper JN0-120시험은 it업계에서도 아주 중요한 인증입니다. 시험패스를 원하신다면 충분한 시험준비는 필수입니다.

만약 아직도Juniper JN0-120시험패스를 위하여 고군분투하고 있다면 바로 우리 ITExamDump를 선택함으로 여러분의 고민을 날려버릴 수 잇습니다, 우리 ITExamDump에서는 최고의 최신의 덤프자료를 제공 합으로 여러분을 도와Juniper JN0-120인증자격증을 쉽게 취득할 수 있게 해드립니다. 만약Juniper JN0-120인증시험으로 한층 업그레이드된 자신을 만나고 싶다면 우리ITExamDump선택을 후회하지 않을 것입니다, 우리ITExamDump과의 만남으로 여러분은 한번에 아주 간편하게Juniper JN0-120시험을 패스하실 수 있으며,Juniper JN0-120자격증으로 완벽한 스펙을 쌓으실 수 있습니다,

시험 번호/코드: JN0-120
시험 이름: Juniper (Juniper networks Certified internet associate.e(jncia-e))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 120 문항
업데이트: 2013-12-16

JN0-120 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-120.html

NO.1 A service provider is operating a Routed 1483 network where the ATM PVCs are treated as a large
subnet. What is a consequence of this configuration?
A. It burns up IP addresses.
B. It conserves IP addresses.
C. It results in a smaller routing table.
D. Each PVC has a separate /30 subnet.
Answer: B

Juniper자료   JN0-120인증   JN0-120   JN0-120 dumps   JN0-120

NO.2 Which service does the ERX Edge Router support with a virtual router?
A. voice over IP
B. wholesale services
C. IP quality of service
D. SNMP management
Answer: B

Juniper자료   JN0-120 dump   JN0-120   JN0-120자료   JN0-120

NO.3 What does the SRP distribute to the line modules when a routing table changes?
A. updated RIB-Out
B. link-state information
C. an incremental update
D. the complete routing table
Answer: D

Juniper dumps   JN0-120 pdf   JN0-120자료   JN0-120

NO.4 Which command configures an ATM PVC in a Bridged 1483 network?
A. atm pvc 33 0 33 aal5snap
B. atm pvc 33 0 33 aal5bridge
C. atm pvc 33 0 33 bridge1483
D. atm pvc 33 0 33 1483bridge
Answer: A

Juniper자격증   JN0-120   JN0-120   JN0-120

NO.5 Where should you install the spare line module in a redundancy group?
A. last slot in the chassis
B. first slot in the chassis
C. lowest numbered slot in the group
D. highest numbered slot in the group
Answer: C

Juniper dumps   JN0-120   JN0-120   JN0-120기출문제   JN0-120 dumps

NO.6 Which two B-RAS service offerings do not require user authentication? (Choose two.)
A. Routed 1483
B. Bridged 1483
C. PPP over ATM
D. PPP over Ethernet
Answer: A,B

Juniper   JN0-120자격증   JN0-120

NO.7 Which configuration command creates a virtual router called isp-1?
A. virtual-router isp-1
B. virtual-router ISP-1
C. virtual-router VR isp-1
D. virtual-router VR ISP-1
Answer: A

Juniper   JN0-120덤프   JN0-120   JN0-120   JN0-120

NO.8 How are the slot groups arranged in the ERX 700 Series Edge Router?
A. Group 1 - Slots 0 &1 Group 2 - Slot 2 Group 3 - Slot 3 Group 4 - Slot 4
B. Group 1 - Slots 2 & 3 Group 2 - Slot 4 Group 3 - Slot 5 Group 4 - Slot 6
C. Group 1 - Slot 2 Group 2 - Slot 3 Group 3 - Slot 4 Group 4 - Slot 5 & 6
D. Group 1 - Slot 3 Group 2 - Slot 4 Group 3 - Slot 5 Group 4 - Slots 6 & 7
Answer: B

Juniper최신덤프   JN0-120   JN0-120덤프

NO.9 Which two statements are correct concerning DHCP Internal Server in the E-series router? (Choose
two.)
A. Provide dynamic IP addresses for DSIs.
B. Provide connectivity to DHCP servers on other subnetworks.
C. Provide dynamic IP addresses for SRC applications.
D. Provide dynamic IP addresses from pools used for PPPoE subscribers.
Answer: A,C

Juniper   JN0-120최신덤프   JN0-120   JN0-120기출문제

NO.10 Given the following router output, which configuration file will the router use at its next reload?
A. config
B. clientqos.cnf
C. startup-config
D. running-configuration
Answer: D

Juniper   JN0-120인증   JN0-120 pdf   JN0-120자격증

NO.11 Which two forms of DSL connectivity provide the same bandwidth in both directions? (Choose two.)
A. ADSL
B. HDSL
C. SDSL
D. RADSL
Answer: B,C

Juniper자료   JN0-120최신덤프   JN0-120기출문제   JN0-120   JN0-120

NO.12 Which protocol is used between the RAS and the authentication server in a narrowband network
environment?
A. RADIUS
B. PPP PAP
C. MS CHAP
D. PPP CHAP
Answer: A

Juniper   JN0-120   JN0-120   JN0-120

NO.13 By default, how does the router handle changes to its operational configuration?
A. Changes are not implemented, but are saved automatically.
B. Changes are not implemented and must be written into memory.
C. Changes are implemented immediately and saved automatically.
D. Changes are implemented immediately, but must be written into memory.
Answer: C

Juniper pdf   JN0-120자격증   JN0-120 pdf   JN0-120 dump   JN0-120   JN0-120 dumps

NO.14 Your ERX router is supporting 100 virtual routers. A specific line module supports IP interfaces in 5
virtual routers. How many routing tables are maintained on that module?
A. 0
B. 1
C. 5
D. 100
Answer: C

Juniper   JN0-120자격증   JN0-120자료   JN0-120최신덤프   JN0-120

NO.15 In a bridged 1483 network, which configuration command allows the ERX Edge Router to advertise
customer networks into the provider's IGP?
A. redistribute direct
B. redistribute static
C. redistribute connected
D. redistribute access-internal
Answer: C

Juniper   JN0-120   JN0-120   JN0-120자격증   JN0-120

NO.16 You would like to install an OC-48c line module in an ERX 1440 Edge Router. Which slots can support
this configuration?
A. 0 and 1
B. 1 and 2
C. 2 and 3
D. 3 and 4
Answer: C

Juniper자격증   JN0-120시험문제   JN0-120

NO.17 Which protocol is used to transfer files to on the ERX Edge Router? (Choose two.)
A. SCP
B. FTP
C. RCP
D. TFTP
Answer: B,D

Juniper자료   JN0-120인증   JN0-120덤프   JN0-120

NO.18 You would like to configure your PC's IP address of 10.10.0.156 as an FTP host with a username of
user and a password of mypass. Which configuration command accomplishes this goal.?
A. host userpc 10.10.0.156 ftp user mypass
B. host userpc 10.10.0.156 tftp user mypass
C. hostname userpc 10.10.0.156 ftp user mypass
D. hostname userpc 10.10.0.156 tftp user mypass
Answer: A

Juniper   JN0-120   JN0-120

NO.19 You would like to configure an ATM PVC with a virtual circuit identifier of 33 on virtual path 0. The PVC
should use an unspecified bit rate and be encapsulated in the AAL5SNAP format. Which command
accomplishes this goal?
A. atm pvc 0/33 aal5snap
B. atm pvc 33 0 33 aal5snap
C. atm pvc 0/33 aal5snap ubr
D. atm pvc 33 0 33 aal5snap ubr
Answer: B

Juniper   JN0-120 pdf   JN0-120 dump

NO.20 What are two ways that IP datagrams are passed from the ingress line module to the egress line
module? (Choose two.)
A. over an ATM PVC
B. over a FastEthernet bus
C. over a Gigabit Ethernet bus
D. over high speed serial bus
Answer: A,D

Juniper dumps   JN0-120   JN0-120 dump   JN0-120   JN0-120

ITexamdump의 000-276덤프의 VCE테스트프로그램과 HH0-240덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-410시험에 대비한 고품질 덤프와 LOT-958시험 최신버전덤프를 제공해드립니다. 최고품질 MB6-889시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-120.html

Juniper JN0-321 덤프

Juniper인증JN0-321시험의자격증은 여러분에 많은 도움이 되리라 믿습니다. 하시는 일에서 한층 더 업그레이드될 것이고 생활에서도 분명히 많은 도움이 될 것입니다. 자격증취득 즉 재산을 얻었죠.Juniper인증JN0-321시험은 여러분이 it지식테스트시험입니다. ITExamDump에서는 여러분의 편리를 위하여 ITExamDump만의 최고의 최신의Juniper JN0-321덤프를 추천합니다. ITExamDump를 선택은 여러분이 최고의 선택입니다. ITExamDump는 제일 전면적인Juniper JN0-321인증시험자료의 문제와 답을 가지고 잇습니다.

ITExamDump에서 최고최신버전의Juniper인증JN0-321시험덤프 즉 문제와 답을 받으실 수 있습니다. 빨리 소지한다면 좋겠죠. 그래야 여러분은 빨리 한번에Juniper인증JN0-321시험을 패스하실 수 있습니다.Juniper인증JN0-321관련 최고의 자료는 현재까지는ITExamDump덤프가 최고라고 자신 있습니다.

Juniper인증 JN0-321시험은 빨리 패스해야 되는데 어디서부터 어떻게 시험준비를 시작해야 하는지 갈피를 잡을수 없는 분들은ITExamDump가 도와드립니다. ITExamDump의 Juniper인증 JN0-321덤프만 공부하면 시험패스에 자신이 생겨 불안한 상태에서 벗어날수 있습니다.덤프는 시장에서 가장 최신버전이기에 최신 시험문제의 모든 시험범위와 시험유형을 커버하여Juniper인증 JN0-321시험을 쉽게 패스하여 자격증을 취득하여 찬란한 미래에 더 가깝도록 도와드립니다.

시험 번호/코드: JN0-321
시험 이름: Juniper (DX, Associate(JNCIA-DX))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 120 문항
업데이트: 2013-12-16

인재도 많고 경쟁도 많은 이 사회에, IT업계인재들은 인기가 아주 많습니다.하지만 팽팽한 경쟁률도 무시할 수 없습니다.많은 IT인재들도 어려운 인증시험을 패스하여 자기만의 자리를 지키고 있습니다.우리ITExamDump에서는 마침 전문적으로 이러한 IT인사들에게 편리하게 시험을 패스할수 있도록 유용한 자료들을 제공하고 있습니다.

Juniper JN0-321인증시험패스 하는 동시에 여러분의 인생에는 획기적인 일 발생한것이죠, 사업에서의 상승세는 당연한것입니다. IT업계종사자라면 누구나 이런 자격증을 취득하고싶어하리라고 믿습니다. 많은 분들이 이렇게 좋은 인증시험은 아주 어렵다고 생각합니다. 네 많습니다. 패스할확율은 아주 낮습니다. 노력하지않고야 당연히 불가능하죠.Juniper JN0-321시험은 기초지식 그리고 능숙한 전업지식이 필요요 합니다. 우리ITExamDump는 여러분들한테Juniper JN0-321시험을 쉽게 빨리 패스할 수 있도록 도와주는 사이트입니다. 우리ITExamDump의Juniper JN0-321시험관련자료로 여러분은 짧은시간내에 간단하게 시험을 패스할수 있습니다. 시간도 절약하고 돈도 적게 들이는 이런 제안은 여러분들한테 딱 좋은 해결책이라고 봅니다.

ITExamDump의 Juniper인증 JN0-321덤프를 구매하시면 1년동안 무료 업데이트서비스버전을 받을수 있습니다. 시험문제가 변경되면 업데이트 하도록 최선을 다하기에ITExamDump의 Juniper인증 JN0-321덤프의 유효기간을 연장시켜드리는 셈입니다.퍼펙트한 구매후는 서비스는ITExamDump의 Juniper인증 JN0-321덤프를 구매하시면 받을수 있습니다.

JN0-321 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-321.html

NO.1 What do you need to upgrade the DXOS?
A. an upgrade .tar file placed on your SCP server
B. an upgrade CD provided by your Juniper Networks representative
C. an upgrade .pac file placed on your TFTP or SCP server
D. an upgrade .gz file placed on your FTP server
Answer: C

Juniper   JN0-321자격증   JN0-321자료

NO.2 Which protocols are used to export and import configurations?
A. TFTP or SCP
B. TFTP or SMTP
C. FTP or SCP
D. FTP or TFTP
Answer: A

Juniper   JN0-321기출문제   JN0-321   JN0-321   JN0-321

NO.3 Which three statements are correct using nitro.apprule on any web application? (Choosethree.)
A. Nitro.apprule provides advance http security on HTTPS applications.
B. Nitro.apprule provides caching on HTTP and HTTPS applications.
C. Nitro.apprule provides transaction guarantee on HTTP application.
D. Nitro.apprule improves client response time on HTTP applications.
E. Nitro.apprule provides advanced authentication on HTTPS applications.
Answer: ABD

Juniper시험문제   JN0-321 pdf   JN0-321   JN0-321   JN0-321기출문제   JN0-321자료

NO.4 Which AppRule type is used to configure 3G caching?
A. PTH
B. RS
C. RTH
D. PTC
Answer: A

Juniper   JN0-321 dump   JN0-321 dump   JN0-321자격증

NO.5 A health care organization has a Juniper DX placed in front of a web server. Theycurrently have
listensideSSL enabled to encrypt traffic from the client to the DX appliance. Due to privacyconcerns, they
havedecided to enable SSL from the client to the server for endtoend SSL. Which twosteps are required
toenable endtoend encryption? (Choose two).
A. Disable clientside SSL on the DX and enable Unified SSL.
B. Enable targetside SSL on the DX.
C. Configure a Redirector on the DX to redirect browsers to the HTTPS port.
D. Enable SSL on the web server.
Answer: BD

Juniper   JN0-321   JN0-321 dumps   JN0-321

NO.6 Your administrator wants to centralize logs from the DX appliance and Cluster. Whichtwo protocols
areavailable to export those logs? (Choose two.)
A. SMTP
B. syslog
C. SCP
D. TFTP
Answer: BC

Juniper   JN0-321   JN0-321

NO.7 Which system elements are exported when using the system snapshot feature?
A. tsdump, tcpdump, current debug and memory states
B. current memory states
C. system process data, system logs, system debug statistics and system passkeys
D. system software, users, configuration, licenses, app rules, SSL certificates and keys
Answer: D

Juniper자격증   JN0-321   JN0-321기출문제   JN0-321자료   JN0-321시험문제   JN0-321

NO.8 An enterprise uses a Webtiered application that provides NTLM enduserauthentication.What is the
required Cluster option?
A. DSR
B. Connect Method
C. Connection Binding
D. Sticky Load Balancing
Answer: C

Juniper pdf   JN0-321자료   JN0-321 pdf   JN0-321기출문제

NO.9 When running SSL on a nonweb application, where are the secure connections made?
A. between the client and the DX appliance and between the DX appliance and the target servers
B. directly between the client and the target server(s)
C. between the client and the DX appliance
D. between the DX appliance and the target server(s)
Answer: C

Juniper   JN0-321   JN0-321   JN0-321   JN0-321

NO.10 Which two are initial configuration steps using the console? (Choose two.)
A. Enable HTTPS for WebUI access.
B. Agree to the license.
C. Configure fullyqualified domain name.
D. Configure console port parameters.
Answer: BC

Juniper   JN0-321   JN0-321   JN0-321

NO.11 In the WebUI, which method will determine if a Cluster target host is available?
A. Click Statistics > Cluster Groups
B. Click Dashboard > Cluster group name
C. Click Services > Cluster Groups
D. Click Log > Audit
Answer: B

Juniper기출문제   JN0-321시험문제   JN0-321   JN0-321

NO.12 Which statement is true about "sticky" load balancing for Clusters?
A. The "clientip" setting does not apply to clusters, it only pertains to a Forwarder.
B. When set to "clientip" it uses the client's IP address to bind the client to a particular target server.
C. When set to "clientip" it ensures that all subsequent requests are directed to the same client that made
the initial request.
D. When set to "clientip" it allows a DX sticky cookie to be sent to and stored by the client based on the IP
address.
Answer: B

Juniper   JN0-321기출문제   JN0-321   JN0-321 dump   JN0-321기출문제   JN0-321최신덤프

NO.13 An enterprise has an internal web application that needs stickiness managed by aCluster. All
employeesaccess the application through a proxy. What is the correct sticky load balancing policy?
A. url persistency
B. cookie persistency
C. urlhash
D. default persistency
Answer: B

Juniper   JN0-321인증   JN0-321   JN0-321 dump   JN0-321최신덤프

NO.14 In the Juniper DX Unified Failover configuration, the VMAC is active on whichdevice(s)?
A. The Standby DX(s)
B. The Master DX and the Active Server(s)
C. The Master DX
D. All DXs in the Unified Failover group
Answer: C

Juniper시험문제   JN0-321   JN0-321 dump   JN0-321최신덤프

NO.15 Which two functions require the use of the CLI? (Choose two.)
A. running a tcpdump
B. adding a VLAN
C. adding a cluster
D. adding a target server
Answer: AB

Juniper   JN0-321   JN0-321

NO.16 In which section of the WebUI does the administrator create and apply AppRules?
A. SLB
B. Cluster
C. Forwarder
D. Redirector
Answer: B

Juniper덤프   JN0-321   JN0-321최신덤프   JN0-321 dump

NO.17 Which two benefits does the Juniper DX provide? (Choose two.)
A. It offloads TCP connections from servers.
B. It spools email messages.
C. It offloads SSL from servers.
D. It compresses images.
Answer: AC

Juniper자료   JN0-321시험문제   JN0-321덤프   JN0-321

NO.18 Which steps are required to use the Juniper DXs ActiveN functionality?
A. Enable DSR for your cluster, create ActiveN blades, create ActiveN groups and addblades,
enableActiveN, synchronize configuration.
B. Disable DSR for your cluster, create ActiveN blades, create ActiveN groups and addblades,
enableActiveN, synchronize configuration.
C. Enable DSR for your cluster, create ActiveN blades, create ActiveN groups and addblades,
selectActiveN load balancing policy, enable sticky.
D. Disable DSR for your cluster, create ActiveN blades, create ActiveN groups and addblades,
selectActiveN load balancing policy, enable sticky.
Answer: A

Juniper   JN0-321자격증   JN0-321인증

NO.19 Which CLI command is used for analysis and troubleshooting of real time trafficcapture?
A. tcpdump
B. show server stats
C. tsdump
D. vmstat
Answer: A

Juniper   JN0-321최신덤프   JN0-321자료   JN0-321

NO.20 Which HTTP return code should be verified when configuring the cache?
A. 302
B. 200
C. 304
D. 501
Answer: B

Juniper자격증   JN0-321   JN0-321 dumps   JN0-321   JN0-321기출문제

ITexamdump의 70-492덤프의 VCE테스트프로그램과 IIA-CFSA덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HP5-K01D시험에 대비한 고품질 덤프와 C_TADM53_70시험 최신버전덤프를 제공해드립니다. 최고품질 시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-321.html

Juniper JN0-130 덤프

IT인증시험이 다가오는데 어느 부분부터 공부해야 할지 망설이고 있다구요? 가장 간편하고 시간을 절약하며 한방에 자격증을 취득할수 있는 최고의 방법을 추천해드립니다. 바로 우리ITExamDump IT인증덤프제공사이트입니다. ITExamDump는 고품질 고적중율을 취지로 하여 여러분들인 한방에 시험에서 패스하도록 최선을 다하고 있습니다. Juniper인증JN0-130시험준비중이신 분들은ITExamDump 에서 출시한Juniper인증JN0-130 덤프를 선택하세요.

Juniper 인증 JN0-130시험대비덤프를 찾고 계시다면ITExamDump가 제일 좋은 선택입니다.저희ITExamDump에서는 여라가지 IT자격증시험에 대비하여 모든 과목의 시험대비 자료를 발췌하였습니다. ITExamDump에서 시험대비덤프자료를 구입하시면 시험불합격시 덤프비용환불신청이 가능하고 덤프 1년 무료 업데이트서비스도 가능합니다. ITExamDump를 선택하시면 후회하지 않을것입니다.

시험 번호/코드: JN0-130
시험 이름: Juniper (Juniper networks Certified internet specialist.e(jncis-e))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 128 문항
업데이트: 2013-12-16

ITExamDump 제공 Juniper JN0-130시험덤프자료가 광범한 시험준비인사들의 찬양을 받은지 하루이틀일이 아닙니다.이렇게 많은 분들이ITExamDump 제공 Juniper JN0-130덤프로 시험을 통과하여 자격증을 취득하였다는것은ITExamDump 제공 Juniper JN0-130덤프가 믿을만한 존재라는것을 증명해드립니다. 덤프에 있는 문제만 열심히 공부하시면 시험통과 가능하기에 시간도 절약해줄수있어 최고의 믿음과 인기를 받아왔습니다. Juniper JN0-130 시험을 봐야 하는 분이라면ITExamDump를 한번 믿어보세요. ITExamDump도움으로 후회없이 멋진 IT전문가로 거듭날수 있을것입니다.

ITExamDump 는 완전히 여러분이 인증시험 준비와 안전한 시험패스를 위한 완벽한 덤프제공 사이트입니다.우리 ITExamDump의 덤프들은 응시자에 따라 ,시험 ,시험방법에 따라 알 맞춤한 퍼펙트한 자료입니다.여러분은 ITExamDump의 알맞춤 덤프들로 아주 간단하고 편하게 인증시험을 패스할 수 있습니다.많은 it인증관연 응시자들은 우리 ITExamDump가 제공하는 문제와 답으로 되어있는 덤프로 자격증을 취득하셨습니다.우리 ITExamDump 또한 업계에서 아주 좋은 이미지를 가지고 있습니다.

근 몇년간IT산업이 전례없이 신속히 발전하여 IT업계에 종사하는 분들이 여느때보다 많습니다. 경쟁이 이와같이 치열한 환경속에서 누구도 대체할수 없는 자기만의 자리를 찾으려면 IT인증자격증취득은 무조건 해야 하는것이 아닌가 싶습니다. Juniper인증 JN0-130시험은 IT인증시험중 가장 인기있는 시험입니다. ITExamDump에서는 여러분이Juniper인증 JN0-130시험을 한방에 패스하도록 실제시험문제에 대비한Juniper인증 JN0-130덤프를 발췌하여 저렴한 가격에 제공해드립니다.시험패스 못할시 덤프비용은 환불처리 해드리기에 고객님께 아무런 페를 끼치지 않을것입니다.

JN0-130 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-130.html

NO.1 Which two types of routes may be advertised via EBGP? (Choose two.)
A. Routes that do not originate in the local AS and are learned by OSPF.
B. Routes that originate on the local router and are advertised into OSPF.
C. Routes that are transiting the local router and are BGP learned routes.
D. Routes that originate on the local router and are injected using a route map.
Answer: CD

Juniper   JN0-130   JN0-130   JN0-130

NO.2 Which CLI command displays the VRFs that are operational within each virtual router?
A. show vir
B. show ip vrf
C. show vrf vir
D. show mpls vrf
Answer: A

Juniper최신덤프   JN0-130자료   JN0-130자료

NO.3 You would like to view all Fast Ethernet interfaces currently using VLAN tagging and the specific VLANs
each interface is using.
Which CLI command displays this information?
A. show fast interface
B. show vlan interface
C. show vlan subinterface
D. show fast interface vlan
Answer: C

Juniper   JN0-130자료   JN0-130

NO.4 Which configuration command places interfaces whose IP addresses are between 192.168.0.0 and
192.168.255.255 into OSPF area 0?
A. network 192.168.0.0 255.255.0.0 area 0.0.0.0
B. network 192.168.0.0 0.0.255.255 area 0.0.0.0
C. area 0.0.0.0 network 192.168.0.0 255.255.0.0
D. area 0.0.0.0 network 192.168.0.0 0.0.255.255
Answer: B

Juniper   JN0-130덤프   JN0-130

NO.5 Which two services protect the ERX Edge Router from unauthorized CLI logins?
A. IPSec
B. SecureID
C. local passwords
D. default IP policy
E. RADIUS authentication
Answer: CE

Juniper   JN0-130 dumps   JN0-130   JN0-130   JN0-130덤프
16. Your ERX Edge Router is constantly going to a boot## prompt.
What is the most likely cause for this condition?
A. bad SRP
B. low voltage
C. bad mid-plane
D. corrupted flash
Answer: D

Juniper   JN0-130   JN0-130   JN0-130자격증
17. Which sequence of events describes the order used to restore normal router operation after
experiencing a corrupted flash?
A. initialize flash, reload, copy new system files from FTP server
B. reload, copy new system files from FTP server, initialize flash
C. initialize flash, copy new system files from FTP server, reload
D. reload, initialize flash, copy new system files from FTP server
Answer: C

Juniper   JN0-130 pdf   JN0-130최신덤프   JN0-130
18. You are trying to recover from a corrupted flash.
Which configuration command configures an IP address of 192.168.1.1/24 on the SRP management
interface when the ERX1400 router is at the boot## prompt?
A. ip address 192.168.1.1/24
B. ip address 192.168.1.1 subnetmask 24
C. ip address 192.168.1.1 255.255.255.0
D. ip address 192.168.1.1 mask 255.255.255.0
Answer: C

Juniper   JN0-130   JN0-130
19. What describes the functionality of NTP when using multiple virtual routers?
A. All virtual routers can act as NTP clients and servers.
B. Only one virtual router can act as an NTP client and a server.
C. Only one virtual router can act as an NTP server but all can be clients.
D. Only one virtual router can act as an NTP client but all can be servers.
Answer: D

Juniper   JN0-130   JN0-130 dump   JN0-130   JN0-130
20. Which configuration command is used to make the ERX Edge Router an NTP server?
A. set ntp-server
B. set ntp server
C. ntp-server enable
D. ntp server enable
Answer: D

Juniper   JN0-130   JN0-130인증
21. Which configuration command allows a virtual router to receive updates from a configured NTP
source?
A. ntp enable
B. enable ntp
C. set ntp-client
D. enable ntp-client
Answer: A

Juniper   JN0-130자료   JN0-130시험문제   JN0-130
22. Which configuration command is used to send debug level events to the console in real time?
A. log here severity debug
B. log destination console severity debug
C. log severity debug destination console
D. log realtime destination console severity debug
Answer: B

Juniper pdf   JN0-130   JN0-130최신덤프
23. Which command initiates a packet trace for all PPP packets on interface atm 6/1.33 ?
A. log filter debug pppPacket atm 6/1.33
B. log severity debug pppPacket atm 6/1.33
C. log filter debug category pppPacket atm 6/1.33
D. log severity debug category pppPacket atm 6/1.33
Answer: B

Juniper dump   JN0-130   JN0-130최신덤프   JN0-130기출문제   JN0-130
24. Log messages are appearing very quickly on the console of your ERX Edge Router.
Which Privileged Exec command disables real-time console logging?
A. no log here
B. no log console
C. destination console severity 7
D. destination console logging off
Answer: A

Juniper인증   JN0-130   JN0-130   JN0-130기출문제   JN0-130 dumps
25. Which two configuration commands are required to direct debug level console logging to your current
ERX Edge Router Telnet session? (Choose two.)
A. log here
B. log telnet here
C. log destination console severity 7
D. log destination telnet severity debug
Answer: AC

Juniper dumps   JN0-130덤프   JN0-130   JN0-130인증
26. A log filter of log severity DEBUG pppPacket ATM 4/3.66 is configured within the category of
pppPacket.
Which configuration command removes this specific log filter?
A. no log severity pppPacket
B. no log severity debug pppPacket
C. no log severity pppPacket atm 4/3.66
D. no log severity debug pppPacket 4/3.66
Answer: C

Juniper dump   JN0-130최신덤프   JN0-130   JN0-130 dumps   JN0-130자료
27. Which configuration command removes all log filters currently configured on the ERX Edge Router?
A. no log here
B. no log fields
C. no log filters
D. no log severity
Answer: C

Juniper   JN0-130   JN0-130   JN0-130자격증
28. Which three statements describe macros on the ERX Edge Router? (Choose three.)
A. They prompt users for input.
B. They cannot prompt users for input.
C. They can be created on the router itself.
D. They are an embedded programming language.
E. They can be created on the user's workstation.
Answer: ADE

Juniper   JN0-130   JN0-130
29. Which command is used to execute a macro called setup.mac ?
A. macro setup
B. macro setup.mac
C. run macro setup
D. run macro setup.mac
Answer: B

Juniper기출문제   JN0-130기출문제   JN0-130시험문제   JN0-130최신덤프   JN0-130자료
30. Which control expression must be the last line in all macros?
A. <# end #>
B. <# finish #>
C. <# endtmpl #>
D. <# terminate #>
Answer: C

Juniper인증   JN0-130   JN0-130인증   JN0-130인증

NO.6 Which message type is used to initiate an RSVP-TE label switched path?
A. path
B. resv
C. setup
D. session
Answer: A

Juniper   JN0-130 dump   JN0-130   JN0-130

NO.7 Which CLI command is used to set a Privileged Exec password of mypassword?
A. enable password 0 mypassword
B. enable password 3 mypassword
C. enable password 5 mypassword
D. enable password 10 mypassword
Answer: A

Juniper자격증   JN0-130   JN0-130   JN0-130인증   JN0-130덤프   JN0-130자격증

NO.8 Which CLI command disconnects all subscribers on an ATM PVC?
A. clear port 4/3.99
B. logout port 4/3.99
C. clear subscriber port 4/3.99
D. logout subscriber port 4/3.99
Answer: D

Juniper시험문제   JN0-130   JN0-130 pdf   JN0-130 dump   JN0-130

NO.9 In a Bridged 1483 network, which set of commands is used to configure an ATM subinterface?
A. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
description Company-XYZ
encapsulation bridge1483
ip address unnumbered loopback0
B. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
description Company-XYZ
encapsulation bridge1483
ip unnumbered loopback0
C. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
encapsulation bridge1483
description Company-XYZ
ip address unnumbered loopback0
D. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
encapsulation bridge1483
description Company-XYZ
ip unnumbered loopback0
Answer: D

Juniper   JN0-130 dump   JN0-130기출문제   JN0-130기출문제   JN0-130   JN0-130

NO.10 Which two BGP attributes are incorporated for loop prevention within an AS using a route reflection
configuration? (Choose two.)
A. AS Path
B. Next Hop
C. Cluster List
D. Originator ID
Answer: CD

Juniper   JN0-130   JN0-130 dumps   JN0-130

NO.11 Why would you make a non-backbone area a stub or not-so-stubby area?
A. to aggregate routes learned from the ABR
B. to lower the cost of routes advertised by the ABR
C. to connect a non-contiguous area to the backbone
D. to decrease the size of the link-state database in that area
Answer: D

Juniper인증   JN0-130   JN0-130   JN0-130

NO.12 Is the IS-IS Designated Intermediate System (DIS) election process called Deterministic or Static and
why?
A. It is Static. If the priorities are equal for a new neighbor and the current DIS only.
B. It is Deterministic. If the well-known pseudonode and system ID is configured on the new neighbor only.
C. It is Deterministic. When a new router appears on a multi-access network with a higher priority value, it
is elected as the DIS.
D. It is Static. When a new intermediate system powers up on a multi-access network, even if it has a
higher priority, it may become a backup DIS.
Answer: C

Juniper최신덤프   JN0-130최신덤프   JN0-130덤프

NO.13 Which CLI command displays the status of a PPP over Ethernet subinterface?
A. show pppoe interface
B. show ppp int state up
C. show ip interface brief
D. show pppoe subinterface
Answer: D

Juniper덤프   JN0-130인증   JN0-130   JN0-130

NO.14 Which three statements about Label-Switched Paths (LSPs) are true? (Choose three.)
A. LSPs are bidirectional.
B. LSPs are unidirectional.
C. LSPs can be signaled by CAC.
D. LSPs can be configured explicitly.
E. LSPs can be configured dynamically.
Answer: BDE

Juniper dump   JN0-130   JN0-130   JN0-130   JN0-130

NO.15 Which three statements are true regarding the DHCP Internal Server? (Choose three.)
A. Can be in remote-access mode.
B. Can be in equal-access mode.
C. Can be in standalone mode.
D. Standalone mode is the default.
E. Equal-access mode is the default.
Answer: BCE

Juniper기출문제   JN0-130   JN0-130

ITexamdump의 3103덤프의 VCE테스트프로그램과 ST0-237덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-484시험에 대비한 고품질 덤프와 MB6-871시험 최신버전덤프를 제공해드립니다. 최고품질 JN0-360시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-130.html

도비 Juniper JN0-331 시험

Juniper JN0-331인증시험패스 하는 동시에 여러분의 인생에는 획기적인 일 발생한것이죠, 사업에서의 상승세는 당연한것입니다. IT업계종사자라면 누구나 이런 자격증을 취득하고싶어하리라고 믿습니다. 많은 분들이 이렇게 좋은 인증시험은 아주 어렵다고 생각합니다. 네 많습니다. 패스할확율은 아주 낮습니다. 노력하지않고야 당연히 불가능하죠.Juniper JN0-331시험은 기초지식 그리고 능숙한 전업지식이 필요요 합니다. 우리ITExamDump는 여러분들한테Juniper JN0-331시험을 쉽게 빨리 패스할 수 있도록 도와주는 사이트입니다. 우리ITExamDump의Juniper JN0-331시험관련자료로 여러분은 짧은시간내에 간단하게 시험을 패스할수 있습니다. 시간도 절약하고 돈도 적게 들이는 이런 제안은 여러분들한테 딱 좋은 해결책이라고 봅니다.

ITExamDump는 저희 제품을 구매한 분들이 100%통과율을 보장해드리도록 최선을 다하고 있습니다. ITExamDump를 선택한것은 시험패스와 자격증취득을 예약한것과 같습니다. ITExamDump의 믿음직한 Juniper인증 JN0-331덤프를 공부해보세요.

시험 번호/코드: JN0-331
시험 이름: Juniper (SEC,Specialist(JNCIS-SEC))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 131 문항
업데이트: 2013-12-16

Juniper인증 JN0-331시험을 한방에 편하게 통과하여 자격증을 취득하려면 시험전 공부가이드가 필수입니다. ITExamDump에서 연구제작한 Juniper인증 JN0-331덤프는Juniper인증 JN0-331시험을 패스하는데 가장 좋은 시험준비 공부자료입니다. ITExamDump덤프공부자료는 엘리트한 IT전문자들이 자신의 노하우와 경험으로 최선을 다해 연구제작한 결과물입니다.IT인증자격증을 취득하려는 분들의 곁은ITExamDump가 지켜드립니다.

Juniper인증 JN0-331시험을 어떻게 공부하면 패스할수 있을지 고민중이시면 근심걱정 버리시고ITExamDump 의 Juniper인증 JN0-331덤프로 가보세요. 문항수가 적고 적중율이 높은 세련된Juniper인증 JN0-331시험준비 공부자료는ITExamDump제품이 최고입니다.

Juniper 인증 JN0-331시험이 너무 어려워서 시험 볼 엄두도 나지 않는다구요? ITExamDump 덤프만 공부하신다면 IT인증시험공부고민은 이젠 그만 하셔도 됩니다. ITExamDump에서 제공해드리는Juniper 인증 JN0-331시험대비 덤프는 덤프제공사이트에서 가장 최신버전이여서 시험패스는 한방에 갑니다. Juniper 인증 JN0-331시험뿐만 아니라 IT인증시험에 관한 모든 시험에 대비한 덤프를 제공해드립니다. 많은 애용 바랍니다.

JN0-331 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-331.html

NO.1 Which two statements describe the difference between JUNOS Software for security platforms and a
traditional router? (Choose two.)
A. JUNOS Software for security platforms supports NAT and PAT; a traditional router does not support
NAT or PAT.
B. JUNOS Software for security platforms secures traffic by default; a traditional router does not secure
traffic by default.
C. JUNOS Software for security platforms allows for session-based forwarding; a traditional router uses
packet-based forwarding.
D. JUNOS Software for security platforms separates broadcast domains; a traditional router does not
separate broadcast domains.
Answer: BC

Juniper   JN0-331자료   JN0-331덤프

NO.2 What are two components of the JUNOS Software architecture? (Choose two.)
A. Linux kernel
B. routing protocol daemon
C. session-based forwarding module
D. separate routing and security planes
Answer: BC

Juniper dumps   JN0-331 pdf   JN0-331   JN0-331   JN0-331   JN0-331인증

NO.3 Users can define policy to control traffic flow between which two components? (Choose two.)
A. from a zone to the device itself
B. from a zone to the same zone
C. from a zone to a different zone
D. from one interface to another interface
Answer: BC

Juniper   JN0-331자료   JN0-331

NO.4 For IKE phase 1 negotiations, when is aggressive mode typically used?
A. when one of the tunnel peers has a dynamic IP address
B. when one of the tunnel peers wants to force main mode to be used
C. when fragmentation of the IKE packet is required between the two peers
D. when one of the tunnel peers wants to specify a different phase 1 proposal
Answer: A

Juniper dump   JN0-331   JN0-331자료   JN0-331 pdf

NO.5 Which three functions are provided by JUNOS Software for security platforms? (Choose three.)
A. VPN establishment
B. stateful ARP lookups
C. Dynamic ARP inspection
D. Network Address Translation
E. inspection of packets at higher levels (Layer 4 and above)
Answer: ADE

Juniper덤프   JN0-331최신덤프   JN0-331최신덤프

NO.6 Which two functions of JUNOS Software are handled by the data plane? (Choose two.)
A. NAT
B. OSPF
C. SNMP
D. SCREEN options
Answer: AD

Juniper시험문제   JN0-331 dump   JN0-331

NO.7 Regarding attacks, which statement is correct?
A. Both DoS and propagation attacks exploit and take control of all unprotected network devices.
B. Propagation attacks focus on suspicious packet formation using the DoS SYN-ACK-ACK proxy flood.
C. DoS attacks are directed at the network protection devices, while propagation attacks are directed at
the servers.
D. DoS attacks are exploits in nature, while propagation attacks use trust relationships to take control of
the devices.
Answer: D

Juniper   JN0-331   JN0-331덤프   JN0-331   JN0-331

NO.8 Which two statements about JUNOS Software packet handling are correct? (Choose two.)
A. JUNOS Software applies service ALGs only for the first packet of a flow.
B. JUNOS Software uses fast-path processing only for the first packet of a flow.
C. JUNOS Software performs route and policy lookup only for the first packet of a flow.
D. JUNOS Software applies SCREEN options for both first and consecutive packets of a flow.
Answer: CD

Juniper   JN0-331   JN0-331   JN0-331

NO.9 What is the purpose of a zone in JUNOS Software?
A. A zone defines a group of security devices with a common management.
B. A zone defines the geographic region in which the security device is deployed.
C. A zone defines a group of network segments with similar security requirements.
D. A zone defines a group of network segments with similar class-of-service requirements.
Answer: C

Juniper   JN0-331   JN0-331

NO.10 Which two statements are true regarding proxy ARP? (Choose two.)
A. Proxy ARP is enabled by default.
B. Proxy ARP is not enabled by default.
C. JUNOS security devices can forward ARP requests to a remote device when proxy ARP is enabled.
D. JUNOS security devices can reply to ARP requests intended for a remote device when proxy ARP is
enabled.
Answer: BD

Juniper pdf   JN0-331   JN0-331 pdf   JN0-331최신덤프

NO.11 Click the Exhibit button.
[edit groups]
user@host# show
node0 {
system {
host-name NODE0;
}
interfaces {
fxp0 {
unit 0 {
family inet {
address 1.1.1.1/24;
}
}
}
}
}
node1 {
system {
host-name NODE1;
}
interfaces {
fxp0 {
unit 0 {
family inet {
address 1.1.1.2/24;
}
}
}
}
}
In the exhibit, what is the function of the configuration statements?
A. This section is where you define all chassis clustering configuration.
B. This configuration is required for members of a chassis cluster to talk to each other.
C. You can apply this configuration in the chassis cluster to make configuration easier.
D. This section is where unique node configuration is applied.
Answer: D

Juniper자료   JN0-331덤프   JN0-331 dumps   JN0-331덤프   JN0-331자료   JN0-331

NO.12 In JUNOS Software, which three packet elements can be inspected to determine if a session already
exists? (Choose three.)
A. IP protocol
B. IP time-to-live
C. source and destination IP address
D. source and destination MAC address
E. source and destination TCP/UDP port
Answer: ACE

Juniper   JN0-331인증   JN0-331   JN0-331   JN0-331

NO.13 A traditional router is better suited than a firewall device for which function?
A. VPN establishment
B. packet-based forwarding
C. stateful packet processing
D. Network Address Translation
Answer: B

Juniper   JN0-331기출문제   JN0-331자격증   JN0-331   JN0-331자격증

NO.14 Host A opens a Telnet connection to Host B. Host A then opens another Telnet connection to Host B.
These connections are the only communication between Host A and Host B. The security policy
configuration permits both connections.
How many flows exist between Host A and Host B?
A. 1
B. 2
C. 3
D. 4
Answer: D

Juniper   JN0-331 dump   JN0-331   JN0-331   JN0-331

NO.15 By default, which condition would cause a session to be removed from the session table?
A. Route entry for the session changed.
B. Security policy for the session changed.
C. The ARP table entry for the source IP address timed out.
D. No traffic matched the session during the timeout period.
Answer: D

Juniper자료   JN0-331최신덤프   JN0-331

NO.16 Which two statements describe the difference between JUNOS Software for security platforms and a
traditional router? (Choose two.)
A. JUNOS Software for security platforms supports NAT and PAT; a traditional router does not support
NAT or PAT.
B. JUNOS Software for security platforms does not forward traffic by default; a traditional router forwards
traffic by default.
C. JUNOS Software for security platforms uses session-based forwarding; a traditional router uses
packet-based forwarding.
D. JUNOS Software for security platforms performs route lookup for every packet; a traditional router
performs route lookup only for the first packet.
Answer: BC

Juniper   JN0-331덤프   JN0-331   JN0-331

NO.17 What is the default session timeout for UDP sessions?
A. 30 seconds
B. 1 minute
C. 5 minutes
D. 30 minutes
Answer: C

Juniper인증   JN0-331기출문제   JN0-331   JN0-331   JN0-331

NO.18 Regarding zone types, which statement is true?
A. You cannot assign an interface to a functional zone.
B. You can specifiy a functional zone in a security policy.
C. Security zones must have a scheduler applied.
D. You can use a security zone for traffic destined for the device itself.
Answer: D

Juniper인증   JN0-331 dump   JN0-331

NO.19 Click the Exhibit button.
[edit schedulers]
user@host# show
scheduler now {
monday all-day;
tuesday exclude;
wednesday {
start-time 07:00:00 stop-time 18:00:00;
}
thursday {
start-time 07:00:00 stop-time 18:00:00;
}
}
[edit security policies from-zone Private to-zone External]
user@host# show
policy allowTransit {
match {
source-address PrivateHosts;
destination-address ExtServers;
application ExtApps;
}
then {
permit {
tunnel {
ipsec-vpn myTunnel;
}
}
}
scheduler-name now;
Based on the configuration shown in the exhibit, what are the actions of the security policy?
A. The policy will always permit transit packets and use the IPsec VPN myTunnel.
B. The policy will permit transit packets only on Monday, and use the IPsec VPN Mytunnel.
C. The policy will permit transit packets and use the IPsec VPN myTunnel all day Monday and
Wednesday 7am to 6pm, and Thursday 7am to 6pm.
D. The policy will always permit transit packets, but will only use the IPsec VPN myTunnel all day Monday
and Wednesday 7am to 6pm, and Thursday 7am to 6pm.
Answer: C

Juniper   JN0-331   JN0-331덤프   JN0-331시험문제   JN0-331

NO.20 Which two configurations are valid? (Choose two.)
A. [edit security zones]
user@host# show
security-zone red {
interfaces {
ge-0/0/1.0;
ge-0/0/3.0;
}
}
security-zone blue {
interfaces {
ge-0/0/2.0;
ge-0/0/3.102;
}
}
B. [edit security zones]
user@host# show
security-zone red {
interfaces {
ge-0/0/1.0;
ge-0/0/2.0;
}
}
security-zone blue {
interfaces {
ge-0/0/1.0;
ge-0/0/3.0;
}
}
C. [edit routing-instances]
user@host# show
red {
interface ge-0/0/3.0;
interface ge-0/0/2.102;
}
blue {
interface ge-0/0/0.0;
interface ge-0/0/3.0;
}
D. [edit routing-instances]
user@host# show
red {
interface ge-0/0/3.0;
interface ge-0/0/3.102;
}
blue {
interface ge-0/0/0.0;
interface ge-0/0/2.0;
}
Answer: AD

Juniper   JN0-331   JN0-331

ITexamdump의 HP0-Y46덤프의 VCE테스트프로그램과 700-101덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 74-344시험에 대비한 고품질 덤프와 70-489시험 최신버전덤프를 제공해드립니다. 최고품질 1z0-559시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-331.html

Juniper JN0-643 최신덤프

ITExamDump 에서는 IT인증시험에 대비한 퍼펙트한Juniper 인증JN0-643덤프를 제공해드립니다. 시험공부할 시간이 충족하지 않은 분들은ITExamDump 에서 제공해드리는Juniper 인증JN0-643덤프로 시험준비를 하시면 자격증 취득이 쉬워집니다. 덤프를 구매하시면 일년무료 업데이트서비스도 받을수 있습니다.

ITExamDump 는 여러분의 IT전문가의 꿈을 이루어 드리는 사이트 입다. ITExamDump는 여러분이 우리 자료로 관심 가는 인중시험에 응시하여 안전하게 자격증을 취득할 수 있도록 도와드립니다. 아직도Juniper 인증JN0-643 인증시험으로 고민하시고 계십니까? Juniper 인증JN0-643인증시험 가이드를 사용하실 생각은 없나요? ITExamDump는 여러분께 시험패스의 편리를 드릴 수 있습니다.

모두 아시다시피Juniper JN0-643인증시험은 업계여서도 아주 큰 비중을 차지할만큼 큰 시험입니다. 하지만 문제는 어덯게 이 시험을 패스할것이냐이죠.Juniper JN0-643인증시험패스하기는 너무 힘들기 때문입니다. 다른사이트에 있는 자료들도 솔직히 모두 정확성이 떨어지는건 사실입니다. 하지만 우리ITExamDump의 문제와 답은 IT인증시험준비중인 모든분들한테 필요한 자료를 제공할수 있습니디. 그리고 중요한건 우리의 문제와 답으로 여러분은 한번에 시험을 패스하실수 있습니다.

우리 ITExamDump 에는 최신의Juniper JN0-643학습가이드가 있습니다. ITExamDump의 부지런한 IT전문가들이 자기만의 지식과 끊임없는 노력과 경험으로 최고의Juniper JN0-643합습자료로Juniper JN0-643인증시험을 응시하실 수 있습니다.Juniper JN0-643인증시험은 IT업계에서의 비중은 아주 큽니다. 시험신청하시는분들도 많아지고 또 많은 분들이 우리ITExamDump의Juniper JN0-643자료로 시험을 패스했습니다. 이미 패스한 분들의 리뷰로 우리ITExamDump의 제품의 중요함과 정확함을 증명하였습니다.

성공으로 향하는 길에는 많은 방법과 방식이 있습니다. Juniper인증 JN0-643시험을 패스하는 길에는ITExamDump의Juniper인증 JN0-643덤프가 있습니다. ITExamDump의Juniper인증 JN0-643덤프는 실제시험 출제방향에 초점을 두어 연구제작한 시험준비공부자료로서 높은 시험적중율과 시험패스율을 자랑합니다.국제적으로 승인해주는 IT자격증을 취득하시면 취직 혹은 승진이 쉬워집니다.

시험 번호/코드: JN0-643
시험 이름: Juniper (Enterprise Routing and Switching, Professional (JNCIP-ENT))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 103 문항
업데이트: 2013-12-16

JN0-643 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-643.html

NO.1 Click the Exhibit button.
Based on the output shown in the exhibit, why is VSTP not working for VLAN 100?
A. No interfaces are assigned to VLAN 100.
B. Your MSTI is misconfigured.
C. RSTP is configured in addition to VSTP.
D. No native VLAN is configured.
Answer: A

Juniper   JN0-643   JN0-643

NO.2 Which two LSA types are only generated by an ABR router? (Choose two.)
A. ASBR summary LSA (Type 4)
B. ASBR LSA (Type 5)
C. Summary LSA (Type 3)
D. Router LSA (Type 1)
Answer: A,C

Juniper기출문제   JN0-643기출문제   JN0-643인증   JN0-643덤프

NO.3 If your WAN-edge router is multihomed to different ISPs, which two BGP attributes would you modify to
affect outbound traffic? (Choose two.)
A. MED
B. origin
C. local preference
D. community
Answer: B,C

Juniper   JN0-643   JN0-643덤프

NO.4 A medium-sized enterprise has some devices that are 802.1X capable and some that are not. Any
device that fails authentication must be provided limited access through a VLAN called NONAUTH. How
do you provide this access?
A. Configure NONAUTH VLAN as the guest VLAN.
B. Configure NONAUTH VLAN as the server-reject VLAN.
C. Configure NONAUTH VLAN as the guest VLAN and the server-reject VLAN
D. Configure a separate VLAN for each type of user: 802.1X and non-802.1X.
Answer: C

Juniper   JN0-643자료   JN0-643   JN0-643최신덤프   JN0-643   JN0-643

NO.5 Click the Exhibit button.
A user on port ge-0/0/12 fails an 802.1x authentication attempt.
What is the next action of Switch A?
A. It puts the Authenticator in the HELD status where all EAPOL packets are discarded until the default
hold timer expires.
B. It communicates with the RADIUS server to confirm the user's password.
C. It transmits an EAP-Identity-Request packet immediately after it sends out EAP-Failure.
D. It tries to authenticate the user using MAC radius authentication.
Answer: C

Juniper인증   JN0-643   JN0-643인증   JN0-643시험문제

NO.6 Click the Exhibit button.
Based on the configuration in the exhibit, why are you seeing drops in the best-effort queue on the SRX
Series platform.?
A. The drop-profile fill level is set too low.
B. Packets are dropped by a firewall policy.
C. The best-effort queue is being shaped.
D. The scheduler is not being applied correctly.
Answer: C

Juniper   JN0-643   JN0-643기출문제   JN0-643시험문제   JN0-643자료   JN0-643

NO.7 Click the Exhibit button.
Referring to the output in the exhibit, why does the router prefer the path toward interface ge0/0/0.0 for the
20.0.0.0/8 route?
A. The origin is IGP.
B. The origin is unknown.
C. The AS path is longer.
D. Multihop is enabled.
Answer: A

Juniper기출문제   JN0-643   JN0-643 dump

NO.8 Click the Exhibit button.
The exhibit shows the output of an OSPF router LSA.
Which interface ID represents the router's loopback address?
A. ID 10.1.1.0
B. ID 10.0.3.4
C. ID 10.0.3.3
D. ID 10.0.2.4
Answer: B

Juniper최신덤프   JN0-643   JN0-643자료   JN0-643   JN0-643

NO.9 When 802.1X, MAC-RADIUS, and Captive Portal are enabled on an interface, which
authentication sequence occurs?
A. The authentication sequence is based on the order of the configuration.
B. If MAC-RADIUS is rejected, Captive Portal will start. If Captive portal is timed out, 802.1X will start.
C. If 802.1X times out, then MAC-RADIUS will start. If MAC-RADIUS is timed out by the RADIUS server,
then Captive Portal will start.
D. If 802.1X times out, then MAC-RADIUS will start. If MAC-RADIUS is rejected by the RADIUS server,
then Captive Portal will start.
Answer: D

Juniper pdf   JN0-643   JN0-643기출문제   JN0-643 pdf   JN0-643   JN0-643

NO.10 Click the Exhibit button.
Based on the output shown in the exhibit, which protocol is configured?
A. MSTP
B. RSTP
C. STP
D. VSTP
Answer: D

Juniper덤프   JN0-643   JN0-643   JN0-643덤프   JN0-643   JN0-643

NO.11 Port authentication falls back to Captive Portal. In which two scenarios would the port
authentication move back to 802.1X? (Choose two.)
A. if any MAC RADIUS request packet is received on the interface and if there are no sessions in
authenticated/authenticating state
B. if Captive Portal is deactivated on the interface
C. if the user gets logged out
D. if the EAP packet is received on the interface and if there are no sessions in
authenticated/authenticating state
Answer: B,D

Juniper   JN0-643   JN0-643시험문제   JN0-643시험문제

NO.12 A user complains about connectivity problems from their IP address (10.1.1.87) to a server
(10.65.1.100).Which Junos command can help verify connectivity in the network? (Choose two.)
A. mroute
B. traceoptions
C. ping
D. clear bgp neighbor
Answer: B,C

Juniper   JN0-643인증   JN0-643덤프

NO.13 Click the Exhibit button.
In the exhibit, which statement about the ABR between Area 8 and Area 2 is true?
A. The router has connectivity to all areas.
B. The router has connectivity to Area 8 only.
C. The router has connectivity to Area 2 only.
D. The router has connectivity to all routers in Area 8 and Area 2.
Answer: D

Juniper시험문제   JN0-643   JN0-643기출문제   JN0-643   JN0-643

NO.14 Click the Exhibit button.
Host 1, Host 2, and Host 3 are connected to Switch A on interface ge-0/0/2. Host 1 and Host 2 have been
authenticated through 802.1X, however Host 3 does not have an 802.1X supplicant.
Referring to the configuration in the exhibit, how can Host 3 be authenticated?
A. secure-authentication option of HTTP or HTTPS must be configured for Captive Portal.
B. MAC RADIUS authentication must be configured for Host 3 instead of Captive Portal.
C. A new authentication-profile must be configured because 802.1X and Captive Portal cannot have the
same authentication-profile.
D. The 802.1X server failback feature must be configured for Host 3 to allow non-802.1X clients to
authenticate.
Answer: B

Juniper pdf   JN0-643 pdf   JN0-643   JN0-643 dumps

NO.15 What is the default LLDP timeout?
A. 60 seconds
B. 90 seconds
C. 120 seconds
D. infinite
Answer: C

Juniper dump   JN0-643   JN0-643   JN0-643자료

ITexamdump의 M70-301덤프의 VCE테스트프로그램과 1Z1-061덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 JN0-696시험에 대비한 고품질 덤프와 HP2-Z27시험 최신버전덤프를 제공해드립니다. 최고품질 HP2-K34시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-643.html

Juniper 인증한 JN0-380 덤프

만약Juniper인증JN0-380시험을 통과하고 싶다면, Pass4Tes의 선택을 추천합니다. Pass4Tes선택은 가장 적은 투자로 많은 이익을 가져올 수 있죠, Pass4Tes에서 제공하는Juniper인증JN0-380시험덤프로 시험패스는 문제없스니다. ITExamDump는 전문적으로 it인증시험관련문제와 답을 만들어내는 제작팀이 있으며, Pass4Tes 이미지 또한 업계에서도 이름이 있답니다

Juniper인증JN0-380시험준비를 하고 계시다면ITExamDump에서 출시한Juniper인증JN0-380덤프를 제일 먼저 추천해드리고 싶습니다. ITExamDump제품은 여러분들이 제일 간편한 방법으로 시험에서 고득점을 받을수 있도록 도와드리는 시험동반자입니다. Juniper인증JN0-380시험패는ITExamDump제품으로 고고고!

시험 번호/코드: JN0-380
시험 이름: Juniper (Wireless LAN, Specialist (JNCIS-WLAN))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 86 문항
업데이트: 2013-12-16

Juniper인증JN0-380시험을 패스하기가 어렵다고 하면 합습가이드를 선택하여 간단히 통과하실 수 잇습니다. 우리ITExamDump에서는 무조건 여러분을 위하여 관연 자료덤프 즉 문제와 답을 만들어낼 것입니다. 우리덤프로Juniper인증JN0-380시험준비를 잘하시면 100%Juniper인증JN0-380시험을 패스할 수 있습니다. ITExamDump덤프로 여러분은Juniper인증JN0-380시험을 패스는 물론 여러분의 귀증한 간도 절약하실 수 있습니다.

IT업계에 종사하는 분이 점점 많아지고 있는 지금 IT인증자격증은 필수품으로 되었습니다. IT인사들의 부담을 덜어드리기 위해ITExamDump는Juniper인증 JN0-380인증시험에 대비한 고품질 덤프를 연구제작하였습니다. Juniper인증 JN0-380시험을 준비하려면 많은 정력을 기울여야 하는데 회사의 야근에 시달리면서 시험공부까지 하려면 스트레스가 이만저만이 아니겠죠. ITExamDump 덤프를 구매하시면 이제 그런 고민은 끝입니다. 덤프에 있는 내용만 공부하시면 IT인증자격증 취득은 한방에 가능합니다.

JN0-380 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-380.html

NO.1 You have installed your AP in the proper location on your network. The AP needs to obtain
configuration information from a controller before it can support wireless clients.
What are three methods that an AP uses to do this? (Choose three.)
A. ICMP ping
B. Keepalive packets
C. DNS Lookup
D. L2 Broadcast
E. DHCP Option 43
Answer: C,D,E

Juniper최신덤프   JN0-380   JN0-380자격증   JN0-380

NO.2 What is the maximum allowed configurable SSIDs per radio?
A. 8
B. 16
C. 32
D. 64
Answer: C

Juniper dump   JN0-380   JN0-380자격증   JN0-380   JN0-380 dumps

NO.3 A user repeatedly calls in to the Help desk complaining about their wireless connection.
Which actions would test the user's wireless connectivity from RingMaster?
A. Locate the client in the client tools screen using the Find Clients tab. Once the client is located,
run the Location History option to find out if the client is near a functioning access point.
B. Locate the client in the client tools screen using the Find Clients tab. Once the client is located,
run the RF ping test to determine RSSI and retry counts to verify the RF environment being
reported by the AP to which the client is connected.
C. Locate the client in the client tools screen using the Find Clients tab. Once the client is located,
choose to terminate the client from the wireless network so they can reestablish a new session.
D. Locate the client in the client tools screen using the Find Clients tab. Once the client is located,
add the client to the Watched Client list to gather additional data on the clients signal strength and
data throughput.
Answer: B

Juniper   JN0-380 dumps   JN0-380 dump   JN0-380   JN0-380

NO.4 Which Juniper Networks WLA model supports spectrum analysis?
A. WLA371
B. WLA422
C. WLA532
D. WLA632
Answer: C

Juniper   JN0-380인증   JN0-380   JN0-380

NO.5 What is the hardware requirement for a RingMaster client?
A. Intel/AMD x86-compatible dual core processor, 2.0Ghz, 2GB RAM, 512 MB HD space
B. Intel/AMD x86-compatible single core processor, 2.0Ghz, 2GB RAM, 512 MB HD space
C. Intel/AMD x86-compatible single core processor, 2.0Ghz, 1GB RAM, 1024 MB HD space
D. Intel/AMD x86-compatible dual core processor, 1.0Ghz, 1GB RAM, 512 MB HD space
Answer: A

Juniper기출문제   JN0-380인증   JN0-380덤프   JN0-380인증   JN0-380   JN0-380
6. During the installation of RingMaster, you receive the installation error: "HTTPS Server port is
already in use. Please select another port."
What should you do to resolve this issue?
A. Change the HTTPS Server port number to 443.
B. Change the HTTPS Server port number so that it does not conflict with other applications.
C. Restart the installation process so that RingMaster can resolve the issue.
D. Change the SNMP Trap Receiver port to 162.
Answer: B

Juniper   JN0-380 dumps   JN0-380최신덤프
7. You are asked to troubleshoot a communication problem between a WLC and a RADIUS server.
You verified that the RADIUS server is reachable from the WLC.
Which WLC CLI command would be used for troubleshooting RADIUS connectivity?
A. rfping
B. show authentication
C. ping
D. radping
Answer: D

Juniper최신덤프   JN0-380   JN0-380   JN0-380 dumps   JN0-380 dump   JN0-380
8. In an auditorium, you have 200 wireless clients connecting to the wireless network. You want
to
configure RF load balancing to distribute client sessions across multiple APs in the area.
Which two parameters are configurable to achieve this? (Choose two.)
A. setting strictness
B. configuring auto-tune
C. defining transmit rates
D. setting band preference
Answer: A,D

Juniper pdf   JN0-380 dumps   JN0-380   JN0-380   JN0-380덤프
9. You want to provide secure wireless services to one set of clients on your network and allow
open
access services to your guest clients. You need to configure service profiles for each type of
access to the network.
Which three methods are used to accomplish this? (Choose three.)
A. Configure one service per WLA.
B. Configure an encryption type.
C. Configure IP addresses.
D. Configure SSIDs.
E. Configure VLANs.
Answer: B,D,E

Juniper자격증   JN0-380기출문제   JN0-380   JN0-380
10. Multiple users are complaining that their wireless connections are not working.
Which RingMaster screen would the administrator use for troubleshooting?
A. Alarms
B. Clients
C. Monitor
D. Verification
Answer: C

Juniper dumps   JN0-380   JN0-380인증   JN0-380 dumps

ITexamdump의 C_TFIN52_64덤프의 VCE테스트프로그램과 MB6-700덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 00M-620시험에 대비한 고품질 덤프와 NS0-155시험 최신버전덤프를 제공해드립니다. 최고품질 HP2-N35시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-380.html

JN0-694 덤프 Juniper 인증 시험

만약Juniper인증JN0-694시험을 통과하고 싶다면, Pass4Tes의 선택을 추천합니다. Pass4Tes선택은 가장 적은 투자로 많은 이익을 가져올 수 있죠, Pass4Tes에서 제공하는Juniper인증JN0-694시험덤프로 시험패스는 문제없스니다. ITExamDump는 전문적으로 it인증시험관련문제와 답을 만들어내는 제작팀이 있으며, Pass4Tes 이미지 또한 업계에서도 이름이 있답니다

It 업계 중 많은 분들이 인증시험에 관심이 많은 인사들이 많습니다.it산업 중 더 큰 발전을 위하여 많은 분들이Juniper JN0-694를 선택하였습니다.인증시험은 패스를 하여야 자격증취득이 가능합니다.그리고 무엇보다도 통행증을 받을 수 잇습니다.Juniper JN0-694은 그만큼 아주 어려운 시험입니다. 그래도Juniper JN0-694인증을 신청하여야 좋은 선택입니다.우리는 매일매일 자신을 업그레이드 하여야만 이 경쟁이 치열한 사회에서 살아남을 수 있기 때문입니다.

시험 번호/코드: JN0-694
시험 이름: Juniper (Enterprise Routing and Switching Support, Professional (JNCSP-ENT))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 36 문항
업데이트: 2013-12-16

Juniper 인증JN0-694시험에 도전해보려고 하는데 공부할 내용이 너무 많아 스트레스를 받는 분들은 지금 보고계시는 공부자료는 책장에 다시 넣으시고ITExamDump의Juniper 인증JN0-694덤프자료에 주목하세요. ITExamDump의 Juniper 인증JN0-694덤프는 오로지 Juniper 인증JN0-694시험에 대비하여 제작된 시험공부가이드로서 시험패스율이 100%입니다. 시험에서 떨어지면 덤프비용전액환불해드립니다.

ITExamDump의 연구팀에서는Juniper JN0-694인증덤프만 위하여 지금까지 노력해왔고 ITExamDump 학습가이드Juniper JN0-694덤프로 시험이 어렵지 않아졌습니다. ITExamDump는 100%한번에Juniper JN0-694이장시험을 패스할 것을 보장하며 우리가 제공하는 문제와 답을 시험에서 백프로 나올 것입니다.여러분이Juniper JN0-694시험에 응시하여 우리의 도움을 받는다면 ITExamDump에서는 꼭 완벽한 자료를 드릴 것을 약속합니다. 또한 일년무료 업데이트서비스를 제공합니다.즉 문제와 답이 갱신이 되었을 경우 우리는 여러분들한테 최신버전의 문제와 답을 다시 보내드립니다.

ITExamDump의 경험이 풍부한 IT전문가들이 연구제작해낸 Juniper인증 JN0-694덤프는 시험패스율이 100%에 가까워 시험의 첫번째 도전에서 한방에 시험패스하도록 도와드립니다. Juniper인증 JN0-694덤프는Juniper인증 JN0-694최신 실제시험문제의 모든 시험문제를 커버하고 있어 덤프에 있는 내용만 공부하시면 아무런 걱정없이 시험에 도전할수 있습니다.

JN0-694는Juniper의 인증시험입니다.JN0-694인증시험을 패스하면Juniper인증과 한 발작 더 내디딘 것입니다. 때문에JN0-694시험의 인기는 날마다 더해갑니다.JN0-694시험에 응시하는 분들도 날마다 더 많아지고 있습니다. 하지만JN0-694시험의 통과 율은 아주 낮습니다.JN0-694인증시험준비중인 여러분은 어떤 자료를 준비하였나요?

JN0-694 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-694.html

NO.1 You observe that a router is using an unusually high amount of CPU cycles.
You determine that continuous SPF calculations in OSPF are being performed.
What are two reasons for this problem? (Choose two.)
A. The wrong authentication keys between the OSPF neighbors are used.
B. The interface MTU is mismatched between the OSPF neighbors.
C. There are duplicate router IDs within the OSPF area.
D. An OSPF adjacency is flapping.
Answer: C,D

Juniper기출문제   JN0-694   JN0-694

NO.2 Your switch is experiencing a problem where a port that should have only one host connected
occasionally shows that multiple MAC addresses are being learned.
Which configuration setting would ensure that no extra hosts can join the network using this switch
port?
A. mac-limit
B. no-mac-learning
C. persistent-learning
D. bpdu-block-on-edge
Answer: D

Juniper덤프   JN0-694   JN0-694최신덤프

NO.3 You are having problems redistributing RIP routes into OSPF. Your Junos device has the
following configuration:
[edit protocols ospf]
user@router# show
import my-policy;
area 0.0.0.0 {
interface ge-0/ 0/ 0.0;
interface ge-0/ 0/ ;
interface ge-0/ 0/ {
passive;
}
}
What would resolve the problem?
A. Apply my-policy as an export policy under the [edit protocols rip] hierarchy.
B. Apply my-policy as an import policy under the [edit protocols rip] hierarchy.
C. Apply my-policy as an export policy under the [edit protocols ospf] hierarchy.
D. Use the area-range parameter instead of a routing policy.
Answer: D

Juniper   JN0-694 dump   JN0-694시험문제

NO.4 You are troubleshooting a problem where an OSPF adjacency between two neighboring
routers will not form.
What are two reasons for this problem? (Choose two.)
A. One or both of the connected interfaces are missing the family inet statement.
B. One or both of the connected interfaces are missing the family iso statement.
C. The connected interfaces are not on the same subnet.
D. Another IGP is running on one or both of the routers, overriding OSPF.
Answer: B,D

Juniper   JN0-694   JN0-694자격증   JN0-694최신덤프

NO.5 You are implementing Q-in-Q tunneling on an EX Series switch. You want the tunnel to support
all C-VLANs; however, only some VLANs are able to send traffic across the tunnel.
Switch-1 has the following configuration:
[edit vlans]
user@Switch-1# show
v100 {
vlan-id 100;
interface {
ge-0/ 0/ 0.10;
ge-0/ 0/1.20;
}
dot1q-tunneling {
customer-vlans [ ];
}
}
What would solve this problem?
A. Add family ethernet-switching to the tunnel-side interface on Switch-1.
B. Implement RSTP .
C. Q-in-Q tunneling will not work in this scenario; use a Layer 2 VPN instead.
D. Remove the customer-vlans statement.
Answer: C

Juniper dump   JN0-694   JN0-694   JN0-694   JN0-694

NO.6 Two neighboring routers are able to form an OSPF adjacency, but are not able to establish an
IBGP neighborship.
What are two reasons for the IBGP neighborship problem? (Choose two.)
A. One of the devices has a misconfigured BGP peer address.
B. One or both of the connected interfaces are missing the family iso statement.
C. OSPF has a lower route preference than BGP .
D. A firewall filter on one of the interfaces is blocking TCP traffic.
Answer: B,C

Juniper   JN0-694   JN0-694

NO.7 Your Junos device is dropping certain traffic flows, while allowing other traffic flows to pass
through the device unaffected.
Which CoS component is causing this problem?
A. BA classification
B. RED
C. MF classification
D. Rewrite rules
Answer: D

Juniper dump   JN0-694시험문제   JN0-694덤프   JN0-694시험문제

NO.8 Your Layer 2 network uses VLAN IDs 100 through 400 and you are required to load-balance
these VLANs between two different root bridges. You are currently using the default RSTP settings
and notice that all VLANs are using the same root bridge.
How do you ensure the VLANs are load-balanced between two root bridges?
A. Configure MSTP with two MSTI regions and split the VLAN range between them.
B. Configure VSTP with two VLAN groups and split the VLAN range between them.
C. Configure two RSTP instances and split the VLAN range between them.
D. Configure STP and RSTP and split the VLAN range between them.
Answer: A

Juniper   JN0-694   JN0-694   JN0-694덤프   JN0-694

ITexamdump의 70-332덤프의 VCE테스트프로그램과 000-959덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 640-916시험에 대비한 고품질 덤프와 M70-301시험 최신버전덤프를 제공해드립니다. 최고품질 000-623시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-694.html