IT인증시험이 다가오는데 어느 부분부터 공부해야 할지 망설이고 있다구요? 가장 간편하고 시간을 절약하며 한방에 자격증을 취득할수 있는 최고의 방법을 추천해드립니다. 바로 우리ITExamDump IT인증덤프제공사이트입니다. ITExamDump는 고품질 고적중율을 취지로 하여 여러분들인 한방에 시험에서 패스하도록 최선을 다하고 있습니다. Juniper인증JN0-130시험준비중이신 분들은ITExamDump 에서 출시한Juniper인증JN0-130 덤프를 선택하세요.
Juniper 인증 JN0-130시험대비덤프를 찾고 계시다면ITExamDump가 제일 좋은 선택입니다.저희ITExamDump에서는 여라가지 IT자격증시험에 대비하여 모든 과목의 시험대비 자료를 발췌하였습니다. ITExamDump에서 시험대비덤프자료를 구입하시면 시험불합격시 덤프비용환불신청이 가능하고 덤프 1년 무료 업데이트서비스도 가능합니다. ITExamDump를 선택하시면 후회하지 않을것입니다.
시험 번호/코드: JN0-130
시험 이름: Juniper (Juniper networks Certified internet specialist.e(jncis-e))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 128 문항
업데이트: 2013-12-16
ITExamDump 제공 Juniper JN0-130시험덤프자료가 광범한 시험준비인사들의 찬양을 받은지 하루이틀일이 아닙니다.이렇게 많은 분들이ITExamDump 제공 Juniper JN0-130덤프로 시험을 통과하여 자격증을 취득하였다는것은ITExamDump 제공 Juniper JN0-130덤프가 믿을만한 존재라는것을 증명해드립니다. 덤프에 있는 문제만 열심히 공부하시면 시험통과 가능하기에 시간도 절약해줄수있어 최고의 믿음과 인기를 받아왔습니다. Juniper JN0-130 시험을 봐야 하는 분이라면ITExamDump를 한번 믿어보세요. ITExamDump도움으로 후회없이 멋진 IT전문가로 거듭날수 있을것입니다.
ITExamDump 는 완전히 여러분이 인증시험 준비와 안전한 시험패스를 위한 완벽한 덤프제공 사이트입니다.우리 ITExamDump의 덤프들은 응시자에 따라 ,시험 ,시험방법에 따라 알 맞춤한 퍼펙트한 자료입니다.여러분은 ITExamDump의 알맞춤 덤프들로 아주 간단하고 편하게 인증시험을 패스할 수 있습니다.많은 it인증관연 응시자들은 우리 ITExamDump가 제공하는 문제와 답으로 되어있는 덤프로 자격증을 취득하셨습니다.우리 ITExamDump 또한 업계에서 아주 좋은 이미지를 가지고 있습니다.
근 몇년간IT산업이 전례없이 신속히 발전하여 IT업계에 종사하는 분들이 여느때보다 많습니다. 경쟁이 이와같이 치열한 환경속에서 누구도 대체할수 없는 자기만의 자리를 찾으려면 IT인증자격증취득은 무조건 해야 하는것이 아닌가 싶습니다. Juniper인증 JN0-130시험은 IT인증시험중 가장 인기있는 시험입니다. ITExamDump에서는 여러분이Juniper인증 JN0-130시험을 한방에 패스하도록 실제시험문제에 대비한Juniper인증 JN0-130덤프를 발췌하여 저렴한 가격에 제공해드립니다.시험패스 못할시 덤프비용은 환불처리 해드리기에 고객님께 아무런 페를 끼치지 않을것입니다.
JN0-130 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-130.html
NO.1 Which two types of routes may be advertised via EBGP? (Choose two.)
A. Routes that do not originate in the local AS and are learned by OSPF.
B. Routes that originate on the local router and are advertised into OSPF.
C. Routes that are transiting the local router and are BGP learned routes.
D. Routes that originate on the local router and are injected using a route map.
Answer: CD
Juniper JN0-130 JN0-130 JN0-130
NO.2 Which CLI command displays the VRFs that are operational within each virtual router?
A. show vir
B. show ip vrf
C. show vrf vir
D. show mpls vrf
Answer: A
Juniper최신덤프 JN0-130자료 JN0-130자료
NO.3 You would like to view all Fast Ethernet interfaces currently using VLAN tagging and the specific VLANs
each interface is using.
Which CLI command displays this information?
A. show fast interface
B. show vlan interface
C. show vlan subinterface
D. show fast interface vlan
Answer: C
Juniper JN0-130자료 JN0-130
NO.4 Which configuration command places interfaces whose IP addresses are between 192.168.0.0 and
192.168.255.255 into OSPF area 0?
A. network 192.168.0.0 255.255.0.0 area 0.0.0.0
B. network 192.168.0.0 0.0.255.255 area 0.0.0.0
C. area 0.0.0.0 network 192.168.0.0 255.255.0.0
D. area 0.0.0.0 network 192.168.0.0 0.0.255.255
Answer: B
Juniper JN0-130덤프 JN0-130
NO.5 Which two services protect the ERX Edge Router from unauthorized CLI logins?
A. IPSec
B. SecureID
C. local passwords
D. default IP policy
E. RADIUS authentication
Answer: CE
Juniper JN0-130 dumps JN0-130 JN0-130 JN0-130덤프
16. Your ERX Edge Router is constantly going to a boot## prompt.
What is the most likely cause for this condition?
A. bad SRP
B. low voltage
C. bad mid-plane
D. corrupted flash
Answer: D
Juniper JN0-130 JN0-130 JN0-130자격증
17. Which sequence of events describes the order used to restore normal router operation after
experiencing a corrupted flash?
A. initialize flash, reload, copy new system files from FTP server
B. reload, copy new system files from FTP server, initialize flash
C. initialize flash, copy new system files from FTP server, reload
D. reload, initialize flash, copy new system files from FTP server
Answer: C
Juniper JN0-130 pdf JN0-130최신덤프 JN0-130
18. You are trying to recover from a corrupted flash.
Which configuration command configures an IP address of 192.168.1.1/24 on the SRP management
interface when the ERX1400 router is at the boot## prompt?
A. ip address 192.168.1.1/24
B. ip address 192.168.1.1 subnetmask 24
C. ip address 192.168.1.1 255.255.255.0
D. ip address 192.168.1.1 mask 255.255.255.0
Answer: C
Juniper JN0-130 JN0-130
19. What describes the functionality of NTP when using multiple virtual routers?
A. All virtual routers can act as NTP clients and servers.
B. Only one virtual router can act as an NTP client and a server.
C. Only one virtual router can act as an NTP server but all can be clients.
D. Only one virtual router can act as an NTP client but all can be servers.
Answer: D
Juniper JN0-130 JN0-130 dump JN0-130 JN0-130
20. Which configuration command is used to make the ERX Edge Router an NTP server?
A. set ntp-server
B. set ntp server
C. ntp-server enable
D. ntp server enable
Answer: D
Juniper JN0-130 JN0-130인증
21. Which configuration command allows a virtual router to receive updates from a configured NTP
source?
A. ntp enable
B. enable ntp
C. set ntp-client
D. enable ntp-client
Answer: A
Juniper JN0-130자료 JN0-130시험문제 JN0-130
22. Which configuration command is used to send debug level events to the console in real time?
A. log here severity debug
B. log destination console severity debug
C. log severity debug destination console
D. log realtime destination console severity debug
Answer: B
Juniper pdf JN0-130 JN0-130최신덤프
23. Which command initiates a packet trace for all PPP packets on interface atm 6/1.33 ?
A. log filter debug pppPacket atm 6/1.33
B. log severity debug pppPacket atm 6/1.33
C. log filter debug category pppPacket atm 6/1.33
D. log severity debug category pppPacket atm 6/1.33
Answer: B
Juniper dump JN0-130 JN0-130최신덤프 JN0-130기출문제 JN0-130
24. Log messages are appearing very quickly on the console of your ERX Edge Router.
Which Privileged Exec command disables real-time console logging?
A. no log here
B. no log console
C. destination console severity 7
D. destination console logging off
Answer: A
Juniper인증 JN0-130 JN0-130 JN0-130기출문제 JN0-130 dumps
25. Which two configuration commands are required to direct debug level console logging to your current
ERX Edge Router Telnet session? (Choose two.)
A. log here
B. log telnet here
C. log destination console severity 7
D. log destination telnet severity debug
Answer: AC
Juniper dumps JN0-130덤프 JN0-130 JN0-130인증
26. A log filter of log severity DEBUG pppPacket ATM 4/3.66 is configured within the category of
pppPacket.
Which configuration command removes this specific log filter?
A. no log severity pppPacket
B. no log severity debug pppPacket
C. no log severity pppPacket atm 4/3.66
D. no log severity debug pppPacket 4/3.66
Answer: C
Juniper dump JN0-130최신덤프 JN0-130 JN0-130 dumps JN0-130자료
27. Which configuration command removes all log filters currently configured on the ERX Edge Router?
A. no log here
B. no log fields
C. no log filters
D. no log severity
Answer: C
Juniper JN0-130 JN0-130 JN0-130자격증
28. Which three statements describe macros on the ERX Edge Router? (Choose three.)
A. They prompt users for input.
B. They cannot prompt users for input.
C. They can be created on the router itself.
D. They are an embedded programming language.
E. They can be created on the user's workstation.
Answer: ADE
Juniper JN0-130 JN0-130
29. Which command is used to execute a macro called setup.mac ?
A. macro setup
B. macro setup.mac
C. run macro setup
D. run macro setup.mac
Answer: B
Juniper기출문제 JN0-130기출문제 JN0-130시험문제 JN0-130최신덤프 JN0-130자료
30. Which control expression must be the last line in all macros?
A. <# end #>
B. <# finish #>
C. <# endtmpl #>
D. <# terminate #>
Answer: C
Juniper인증 JN0-130 JN0-130인증 JN0-130인증
NO.6 Which message type is used to initiate an RSVP-TE label switched path?
A. path
B. resv
C. setup
D. session
Answer: A
Juniper JN0-130 dump JN0-130 JN0-130
NO.7 Which CLI command is used to set a Privileged Exec password of mypassword?
A. enable password 0 mypassword
B. enable password 3 mypassword
C. enable password 5 mypassword
D. enable password 10 mypassword
Answer: A
Juniper자격증 JN0-130 JN0-130 JN0-130인증 JN0-130덤프 JN0-130자격증
NO.8 Which CLI command disconnects all subscribers on an ATM PVC?
A. clear port 4/3.99
B. logout port 4/3.99
C. clear subscriber port 4/3.99
D. logout subscriber port 4/3.99
Answer: D
Juniper시험문제 JN0-130 JN0-130 pdf JN0-130 dump JN0-130
NO.9 In a Bridged 1483 network, which set of commands is used to configure an ATM subinterface?
A. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
description Company-XYZ
encapsulation bridge1483
ip address unnumbered loopback0
B. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
description Company-XYZ
encapsulation bridge1483
ip unnumbered loopback0
C. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
encapsulation bridge1483
description Company-XYZ
ip address unnumbered loopback0
D. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
encapsulation bridge1483
description Company-XYZ
ip unnumbered loopback0
Answer: D
Juniper JN0-130 dump JN0-130기출문제 JN0-130기출문제 JN0-130 JN0-130
NO.10 Which two BGP attributes are incorporated for loop prevention within an AS using a route reflection
configuration? (Choose two.)
A. AS Path
B. Next Hop
C. Cluster List
D. Originator ID
Answer: CD
Juniper JN0-130 JN0-130 dumps JN0-130
NO.11 Why would you make a non-backbone area a stub or not-so-stubby area?
A. to aggregate routes learned from the ABR
B. to lower the cost of routes advertised by the ABR
C. to connect a non-contiguous area to the backbone
D. to decrease the size of the link-state database in that area
Answer: D
Juniper인증 JN0-130 JN0-130 JN0-130
NO.12 Is the IS-IS Designated Intermediate System (DIS) election process called Deterministic or Static and
why?
A. It is Static. If the priorities are equal for a new neighbor and the current DIS only.
B. It is Deterministic. If the well-known pseudonode and system ID is configured on the new neighbor only.
C. It is Deterministic. When a new router appears on a multi-access network with a higher priority value, it
is elected as the DIS.
D. It is Static. When a new intermediate system powers up on a multi-access network, even if it has a
higher priority, it may become a backup DIS.
Answer: C
Juniper최신덤프 JN0-130최신덤프 JN0-130덤프
NO.13 Which CLI command displays the status of a PPP over Ethernet subinterface?
A. show pppoe interface
B. show ppp int state up
C. show ip interface brief
D. show pppoe subinterface
Answer: D
Juniper덤프 JN0-130인증 JN0-130 JN0-130
NO.14 Which three statements about Label-Switched Paths (LSPs) are true? (Choose three.)
A. LSPs are bidirectional.
B. LSPs are unidirectional.
C. LSPs can be signaled by CAC.
D. LSPs can be configured explicitly.
E. LSPs can be configured dynamically.
Answer: BDE
Juniper dump JN0-130 JN0-130 JN0-130 JN0-130
NO.15 Which three statements are true regarding the DHCP Internal Server? (Choose three.)
A. Can be in remote-access mode.
B. Can be in equal-access mode.
C. Can be in standalone mode.
D. Standalone mode is the default.
E. Equal-access mode is the default.
Answer: BCE
Juniper기출문제 JN0-130 JN0-130
ITexamdump의 3103덤프의 VCE테스트프로그램과 ST0-237덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-484시험에 대비한 고품질 덤프와 MB6-871시험 최신버전덤프를 제공해드립니다. 최고품질 JN0-360시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
