지금 같은 세대에 많은 분들이 IT업계에 관심을 가지고 있습니다. 이렇게 인재가 많은 사회에서 IT관련인사들은 아직도 적은 편입니다. 면접 시에도 IT인증 자격증유무를 많이들 봅니다. 때문에 IT자격증이 많은 인기를 누리고 있습니다.이런 살아가기 힘든 사회에서 이런 자격증들 또한 취득하기가 넘 어렵습니다.EMC E20-597인증시험 또한 아주 어려운 시험입니다. 많은 분들이 응시하지만 통과하는 분들은 아주 적습니다.
ITExamDump의EMC E20-597시험자료의 문제와 답이 실제시험의 문제와 답과 아주 비슷합니다. 우리의 짧은 학습가이드로 빠른 시일 내에 관련지식을 터득하여 응시준비를 하게 합니다. 우리는 우리의EMC E20-597인증시험덤프로 시험패스를 보장합니다.
근 몇년간IT산업이 전례없이 신속히 발전하여 IT업계에 종사하는 분들이 여느때보다 많습니다. 경쟁이 이와같이 치열한 환경속에서 누구도 대체할수 없는 자기만의 자리를 찾으려면 IT인증자격증취득은 무조건 해야 하는것이 아닌가 싶습니다. EMC인증 E20-597시험은 IT인증시험중 가장 인기있는 시험입니다. ITExamDump에서는 여러분이EMC인증 E20-597시험을 한방에 패스하도록 실제시험문제에 대비한EMC인증 E20-597덤프를 발췌하여 저렴한 가격에 제공해드립니다.시험패스 못할시 덤프비용은 환불처리 해드리기에 고객님께 아무런 페를 끼치지 않을것입니다.
ITExamDump의 EMC인증 E20-597덤프를 선택하여EMC인증 E20-597시험공부를 하는건 제일 현명한 선택입니다. 시험에서 떨어지면 덤프비용 전액을 환불처리해드리고EMC인증 E20-597시험이 바뀌면 덤프도 업데이트하여 고객님께 최신버전을 발송해드립니다. EMC인증 E20-597덤프뿐만아니라 IT인증시험에 관한 모든 덤프를 제공해드립니다.
ITExamDump연구한 전문EMC E20-597인증시험을 겨냥한 덤프가 아주 많은 인기를 누리고 있습니다. ITExamDump제공되는 자료는 지식을 장악할 수 있는 반면 많은 경험도 쌓을 수 있습니다. ITExamDump는 많은 IT인사들의 요구를 만족시켜드릴 수 있는 사이트입니다. 비록EMC E20-597인증시험은 어렵지만 우리ITExamDump의 문제집으로 가이드 하면 여러분은 아주 자신만만하게 응시하실 수 있습니다. 안심하시고 우리 ITExamDump가 제공하는 알맞춤 문제집을 사용하시고 완벽한EMC E20-597인증시험 준비를 하세요.
시험 번호/코드: E20-597
시험 이름: EMC (Backup and Recovery Specialist Exam for Storage Administrators)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 168 문항
업데이트: 2013-10-10
E20-597 덤프무료샘플다운로드하기: http://www.itexamdump.com/E20-597.html
NO.1 Refer to the exhibit. An EMC NetWorker customer has two data zones, A and B, with autochanger AC1
and AC2, respectively, with four drives each. AC1 is configured as a dedicated autochanger and AC2 is
configured as a shared autochanger.
Two drives of AC2 are statically assigned. How many drives of AC2 can be shared in Zone A?
A. 2
B. 0
C. 4
D. 6
Answer: B
EMC E20-597 E20-597 E20-597 E20-597
NO.2 What is a characteristic of how the EMC NetWorker modules integrate with native applications?
A. The developer of the native application provides a NetWorker module to allow for protection of their
application with NetWorker.
B. The NetWorker module runs on the NetWorker server and acts as an intermediary for data coming
from the NetWorker client module.
C. The NetWorker module acts as an intermediate layer between NetWorker and the native application.
D. The NetWorker module always takes the place of the standard NetWorker client allowing for backup of
applications and file systems.
Answer: C
EMC E20-597인증 E20-597 E20-597시험문제 E20-597
NO.3 You have successfully configured three SQL servers for backup with the EMC NetWorker Module for
SQL. These servers are configured as follows:
Scheduled backup of the group shows that all SQL data from the three servers was successfully backed
up. However, when you attempt to recover the SQL data using the standard NetWorker user GUI, you
only see file system data to recover.
What must you do to recover the SQL data backed up with the NetWorker module?
A. Modify the browse time within the NetWorker user GUI to show the period for which you want to
recover.
B. Use the Microsoft SQL Server native tools to recover the data from NetWorker.
C. Modify the save set to include an instance or database name after MSSQL:.
D. Launch the NetWorker User for SQL.
Answer: D
EMC E20-597 E20-597인증
NO.4 What is the backup command specified in the EMC NetWorker client resource for EMC Centera
backups?
A.savepnpc
B.nsrdasv
C.nsrndmp_save
D.nsrsnap_vss_save.exe
Answer: C
EMC pdf E20-597 E20-597 dumps E20-597최신덤프 E20-597 pdf
NO.5 When adding an EMC NetWorker server's name into the /nsr/res/servers file of a client, which service
must be restarted on the client for the change to take effect?
A. nsrd
B. nsrexecd
C. nsrindexd
D. nsrdb
Answer: B
EMC최신덤프 E20-597 E20-597덤프 E20-597 pdf
NO.6 You have an EMC NetWorker server with one storage node. There is an autoloader with four tape drives.
Two drives each are dedicated to the server and storage node. A new Celerra has been added to the
network with 500 GB of data. What must be done to back up the data on the Celerra?
A. Create a storage node on the Celerra and select NDMP in the "type of storage node" field.
B. Configure a device on the NetWorker server as an NDMP device and back up the Celerra to this
device.
C. Configure a client for the Celerra to use DSA and back up its data to either the NetWorker server or
storage node.
D. Create an NDMP backup pool and add this pool to a save group with other clients.
Answer: C
EMC E20-597 E20-597최신덤프 E20-597
NO.7 Which Microsoft VSS component is responsible for creation and maintenance of a shadow copy?
A. Requestor
B. Provider
C. Writer
D. Interceptor
Answer: B
EMC E20-597 E20-597덤프 E20-597
NO.8 What is a characteristic of cloud volumes in EMC NetWorker?
A.Infinitely appendable
B.Recyclable
C.Space cannot be reclaimed.
D.Data cannot be compressed or encrypted.
Answer: A
EMC자격증 E20-597 dumps E20-597 E20-597 E20-597시험문제
NO.9 Refer to the exhibit. In an EMC NetWorker environment, the storage node sn1 is down for maintenance.
According to the client properties, what happens when the backup of the client starts?
A. The backup data will be sent to the storage node sn2.
B. The backup will fail as the storage node sn1 is not available.
C. The backup data will be sent to any available storage node.
D. The backup data will be sent to the NetWorker server.
Answer: A
EMC E20-597 E20-597 E20-597 E20-597인증 E20-597
NO.10 What is a characteristic of VCB backups in EMC NetWorker?
A.Supports image and file-based backups
B.Requires a NetWorker client on each virtual machine
C.Requires a storage node on the VCB backup proxy
D.Does not support LAN-free backup
Answer: A
EMC E20-597자료 E20-597
NO.11 An EMC NetWorker customer wants to perform a complete backup of a SQL server with three
databases. Which save set name should be used?
A.MSSQL:DB
B.MSSQL:*
C.MSSQL:ALLDB
D.MSSQL:
Answer: D
EMC dump E20-597덤프 E20-597시험문제 E20-597자격증
NO.12 A backup administrator is configuring an EMC NetWorker embedded storage node within an EMC Disk
Library. To ensure that the embedded storage node is used to read the data during clone operations, what
is required?
A.Add the Disk Library engine's hostname to the "Read hostname" field in the device properties.
B.Set the clone storage node value for the embedded storage node client resource to itself.
C.Create a client for the embedded storage node.
D.Create a clone pool and assign the appropriate rights to it.
Answer: A
EMC E20-597 E20-597 E20-597 E20-597
NO.13 What is a characteristic of EMC NetWorker SnapImage module backups?
A.Block-level backups of dense file systems
B.Fast block-level backups of a file system mounted on a proxy server
C.Immediate recovery of a file system from a persistent snapshot
D.SAN-based image-level backup and recovery of file systems
Answer: A
EMC E20-597시험문제 E20-597 E20-597
NO.14 A customer using EMC NetWorker Power edition attempts to set server parallelism to 96. When saving
the changes they notice that the server parallelism reverts back to 64.
What action needs to be taken to set server parallelism to 96.?
A. Set device max sessions to 96.
B. Configure group parallelism to 96.
C. Enable diagnostic mode.
D. Add NetWorker Storage Node Enabler Code.
Answer: D
EMC dumps E20-597 E20-597 E20-597시험문제
NO.15 A customer has the following EMC NetWorker configuration:
How many nsrlcpd processes are running on the NetWorker server?
A. 4
B. 12
C. 16
D. 0
Answer: D
EMC E20-597 E20-597기출문제
ITexamdump의 70-687덤프의 VCE테스트프로그램과 3107덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 1Z0-478시험에 대비한 고품질 덤프와 ICGB시험 최신버전덤프를 제공해드립니다. 최고품질 70-688시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기