IT업계에 종사하는 분들은 치열한 경쟁을 많이 느낄것입니다. 치열한 경쟁속에서 자신의 위치를 보장하는 길은 더 많이 배우고 더 많이 노력하는것 뿐입니다.국제적으로 인정받은 IT인증자격증을 취득하는것이 제일 중요한 부분이 아닌가 싶기도 합니다. 다른 분이 없는 자격증을 내가 소유하고 있다는 생각만 해도 뭔가 안전감이 느껴지지 않나요? 더는 시간낭비하지 말고ITExamDump의CheckPoint인증 156-215.75덤프로CheckPoint인증 156-215.75시험에 도전해보세요.
IT인증시험덤프자료를 제공해드리는 사이트는 너무나도 많습니다. 그중에서 대부분 분들이ITExamDump제품에 많은 관심과 사랑을 주고 계시는데 그 원인은 무엇일가요?바로ITExamDump에서 제공해드리는 덤프자료 품질이 제일 좋고 업데이트가 제일 빠르고 가격이 제일 저렴하고 구매후 서비스가 제일 훌륭하다는 점에 있습니다. ITExamDump 표 CheckPoint인증156-215.75덤프를 공부하시면 시험보는데 자신감이 생기고 시험불합격에 대한 우려도 줄어들것입니다.
우선 우리ITExamDump 사이트에서CheckPoint 156-215.75관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다.체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump에서 제공하는CheckPoint 156-215.75덤프로 시험 준비하시면 편안하게 시험을 패스하실 수 있습니다.
CheckPoint인증 156-215.75시험을 패스하여 자격증을 취득하는게 꿈이라구요? ITExamDump에서 고객님의CheckPoint인증 156-215.75시험패스꿈을 이루어지게 지켜드립니다. ITExamDump의 CheckPoint인증 156-215.75덤프는 가장 최신시험에 대비하여 만들어진 공부자료로서 시험패스는 한방에 끝내줍니다.
시험 번호/코드: 156-215.75
시험 이름: CheckPoint (Check Point Certified Security Administrator)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 531 문항
업데이트: 2013-10-13
IT인증시험은 국제적으로 인정받는 자격증을 취득하는 과정이라 난이도가 아주 높습니다. CheckPoint인증 156-215.75시험은 IT인증자격증을 취득하는 시험과목입니다.어떻게 하면 난이도가 높아 도전할 자신이 없는 자격증을 한방에 취득할수 있을가요? 그 답은ITExamDump에서 찾을볼수 있습니다. ITExamDump에서는 모든 IT인증시험에 대비한 고품질 시험공부가이드를 제공해드립니다. ITExamDump에서 연구제작한 CheckPoint인증 156-215.75덤프로CheckPoint인증 156-215.75시험을 준비해보세요. 시험패스가 한결 편해집니다.
이 글을 보시게 된다면CheckPoint인증 156-215.75시험패스를 꿈꾸고 있는 분이라고 믿습니다. CheckPoint인증 156-215.75시험공부를 아직 시작하지 않으셨다면 망설이지 마시고ITExamDump의CheckPoint인증 156-215.75덤프를 마련하여 공부를 시작해 보세요. 이렇게 착한 가격에 이정도 품질의 덤프자료는 찾기 힘들것입니다. ITExamDump의CheckPoint인증 156-215.75덤프는 고객님께서 CheckPoint인증 156-215.75시험을 패스하는 필수품입니다.
156-215.75 덤프무료샘플다운로드하기: http://www.itexamdump.com/156-215.75.html
NO.1 UDP packets are delivered if they are _________.
A. A legal response to an allowed request on the inverse UDP ports and IP
B. A Stateful ACK to a valid SYN-SYN-/ACK on the inverse UDP ports and IP
C. Reference in the SAM related Dynamic tables
D. Bypassing the Kernel by the forwarding layer
of clusterXL
Answer: A
CheckPoint 156-215.75 156-215.75 dumps 156-215.75 156-215.75최신덤프 156-215.75
NO.2 How can you most quickly reset Secure Internal Communications (SIC) between a Security
Management Server and Security Gateway?
A. Run the command fwm sic-reset to initialize the Internal Certificate Authority (ICA) of the Security
Management Server. Then retype the activation key on the Security Gateway from SmartDashboard.
B. Use SmartDashboard to retype the activation key on the Security Gateway. This will automatically
Sync SIC to both the Security Management Server and Gateway.
C. From cpconfig on the Gateway, choose the Secure Internal Communication option and retype the
activation key. Next, retype the same key in the Gateway object in SmartDashboard and reinitialize
Secure Internal Communications (SIC).
D. From the Security Management Server s command line, Type fw putkey p <shared key> < IP Address
of security Gateway>.
Answer: C
CheckPoint dump 156-215.75자료 156-215.75자격증 156-215.75
NO.3 The customer has a small Check Point installation which includes one Windows 2003 server as
SmartConsole and Security Management Server with a second server running SecurePlatform as
Security Gateway. This is an example of a(n):
A. Hybrid Installation.
B. Unsupported configuration.
C. Distributed Installation.
D. Stand-Alone Installation.
Answer: C
CheckPoint pdf 156-215.75 156-215.75
NO.4 The Check Point Security Gateway's virtual machine (kernel) exists between which two layers of the
OSI model?
A. Session and Network layers
B. Application and Presentation layers
C. Physical and Datalink layers
D. Network and Datalink layers
Answer: D
CheckPoint 156-215.75 156-215.75 pdf 156-215.75
NO.5 The customer has a small Check Point installation, which includes one Linux Enterprise 3.0 server
working as the SmartConsole, and a second server running Windows 2003 as both Security Management
Server running Windows 2003 as both Security Management Server and Security Gateway. This is an
example of a(n).
A. Stand-Alone Installation
B. Distributed Installation
C. Hybrid Installation
D. Unsupported configuration
Answer: D
CheckPoint 156-215.75 156-215.75덤프 156-215.75 156-215.75 156-215.75
NO.6 You are a security architect and need to design a secure firewall, VPN and IPS solution. Where would
be the best place to install IPS in the topology if the internal network is already protected?
A. On the firewall itself to protect all connected networks centrally.
B. On each network segment separately.
C. On the LAN is enough, the DMZ does not need to be protected.
D. In front of the firewall is enough.
Answer: A
CheckPoint최신덤프 156-215.75 156-215.75 156-215.75인증 156-215.75최신덤프
NO.7 You are installing a Security Management Server. Your security plan calls for three administrators for
this particular server. How many can you create during installation?
A. Depends on the license installed on the Security Management Server
B. Only one with full access and one with read-only access
C. One
D. As many as you want
Answer: C
CheckPoint 156-215.75 dumps 156-215.75 dump 156-215.75
NO.8 The customer has a small Check Point installation which includes one Windows XP workstation as the
SmartConsole, one Solaris server working as Security Management Server, and a third server running
SecurePlatform as Security Gateway. This is an example of a(n):
A. Stand-Alone Installation.
B. Unsupported configuration
C. Distributed Installation.
D. Hybrid Installation.
Answer: C
CheckPoint 156-215.75기출문제 156-215.75 156-215.75
NO.9 When doing a Stand-Alone Installation, you would install the Security Management Server with which
other Check Point architecture component?
A. SecureClient
B. Security Gateway
C. SmartConsole
D. None, Security Management Server would be installed by itself
Answer: B
CheckPoint 156-215.75 156-215.75 156-215.75자료 156-215.75 pdf 156-215.75
NO.10 The customer has a small Check Point installation which includes one Windows 2003 server as the
SmartConsole and a second server running SecurePlatform as both Security Management Server and
the Security Gateway. This is an example of a(n):
A. Unsupported configuration.
B. Hybrid Installation.
C. Distributed Installation.
D. Stand-Alone Installation.
Answer: D
CheckPoint 156-215.75 156-215.75 156-215.75 156-215.75
NO.11 Which of the following statements about Bridge mode is TRUE.?
A. When managing a Security Gateway in Bridge mode, it is possible to use a bridge interface for Network
Address Translation.
B. Assuming a new installation, bridge mode requires changing the existing IP routing of the network.
C. All ClusterXL modes are supported.
D. A bridge must be configured with a pair of interfaces.
Answer: D
CheckPoint인증 156-215.75 156-215.75덤프 156-215.75
NO.12 Of the three mechanisms Check Point uses for controlling traffic, which enables firewalls to incorporate
layer 4 awareness in packet inspection?
A. IPS
B. Packet filtering
C. Stateful Inspection
D. Application Intelligence
Answer: C
CheckPoint dump 156-215.75인증 156-215.75 dump
NO.13 Which SmartConsole component can Administrators use to track remote administrative activities?
A. WebUI
B. Eventia Reporter
C. SmartView Monitor
D. SmartView Tracker
Answer: D
CheckPoint시험문제 156-215.75덤프 156-215.75 dumps
NO.14 R75's INSPECT Engine inserts itself into the kernel between which two layers of the OSI model?
A. Presentation and Application
B. Physical and Data
C. Session and Transport
D. Data and Network
Answer: D
CheckPoint 156-215.75 156-215.75 156-215.75시험문제
NO.15 When Jon first installed the system, he forgot to configure DNS servers on his Security Gateway.
How could Jon configure DNS servers now that his Security Gateway is in production?
A. Login to the firewall using SSH and run cpconfig, then select Domain Name Servers.
B. Login to the firewall using SSH and run fwm, then select System Configuration and Domain Name
Servers.
C. Login to the SmartDashboard, edit the firewall Gateway object, select the tab Interfaces, then Domain
Name Servers.
D. Login to the firewall using SSH and run sysconfig, then select Domain Name Servers.
Answer: D
CheckPoint 156-215.75 156-215.75 156-215.75자료 156-215.75 156-215.75 dumps
NO.16 You are running the Security Gateway on SecurePlatform and configure SNX with default settings. The
client fails to connect to the Security Gateway. What is wrong?
A. The routing table on the client does not get modified.
B. The client has Active-X blocked.
C. The client is configured incorrectly.
D. The SecurePlatform Web User Interface is listening on port 443.
Answer: D
CheckPoint 156-215.75 pdf 156-215.75 dumps 156-215.75
NO.17 Once installed, the R75 kernel resides directly below which layer of the OSI model? Note: Application
is the top and Physical is the bottom of the IP stack.
A. Network
B. Transport
C. Data Link
D. Session
Answer: A
CheckPoint자료 156-215.75 dump 156-215.75 pdf 156-215.75 156-215.75
NO.18 During which step in the installation process is it necessary to note the fingerprint for first-time
verification?
A. When establishing SIC between the Security Management Server and the Gateway
B. When configuring the Security Management Server using cpconfig
C. When configuring the Security Gateway object in SmartDashboard
D. When configuring the Gateway in the WebUl
Answer: B
CheckPoint최신덤프 156-215.75덤프 156-215.75자료 156-215.75 dump
NO.19 Which of the following statements is TRUE about management plug-ins?
A. The plug-in is a package installed on the Security Gateway.
B. A management plug-in interacts with a Security Management Server to provide new features and
support for new products.
C. Using a plug-in offers full central management only if special licensing is applied to specific features of
the plug-in.
D. Installing a management plug-in is just like an upgrade process. (It overwrites existing components.)
Answer: B
CheckPoint덤프 156-215.75덤프 156-215.75 dump 156-215.75 156-215.75시험문제
NO.20 How can you recreate the account of the Security Administrator, which was created during initial
installation of the Management Server on SecurePlatform?
A. Launch cpconfig and delete the Administrator's account. Recreate the account with the same name.
B. Export the user database into an ASCII file with fwm dbexport. Open this file with an editor, and delete
the Administrator Account portion of the file. You will be prompted to create a new account.
C. Type cpm -a, and provide the existing Administrator's account name. Reset the Security
Administrator's password.
D. Launch SmartDashboard in the User Management screen, and delete the cpconfig administrator.
Answer: A
CheckPoint 156-215.75덤프 156-215.75인증 156-215.75 pdf
ITexamdump의 CAT-380덤프의 VCE테스트프로그램과 70-481덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-585시험에 대비한 고품질 덤프와 HP2-N37시험 최신버전덤프를 제공해드립니다. 최고품질 200-101시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기