ITExamDump 에서는 IT인증시험에 대비한 퍼펙트한Juniper 인증JN0-643덤프를 제공해드립니다. 시험공부할 시간이 충족하지 않은 분들은ITExamDump 에서 제공해드리는Juniper 인증JN0-643덤프로 시험준비를 하시면 자격증 취득이 쉬워집니다. 덤프를 구매하시면 일년무료 업데이트서비스도 받을수 있습니다.
ITExamDump 는 여러분의 IT전문가의 꿈을 이루어 드리는 사이트 입다. ITExamDump는 여러분이 우리 자료로 관심 가는 인중시험에 응시하여 안전하게 자격증을 취득할 수 있도록 도와드립니다. 아직도Juniper 인증JN0-643 인증시험으로 고민하시고 계십니까? Juniper 인증JN0-643인증시험 가이드를 사용하실 생각은 없나요? ITExamDump는 여러분께 시험패스의 편리를 드릴 수 있습니다.
모두 아시다시피Juniper JN0-643인증시험은 업계여서도 아주 큰 비중을 차지할만큼 큰 시험입니다. 하지만 문제는 어덯게 이 시험을 패스할것이냐이죠.Juniper JN0-643인증시험패스하기는 너무 힘들기 때문입니다. 다른사이트에 있는 자료들도 솔직히 모두 정확성이 떨어지는건 사실입니다. 하지만 우리ITExamDump의 문제와 답은 IT인증시험준비중인 모든분들한테 필요한 자료를 제공할수 있습니디. 그리고 중요한건 우리의 문제와 답으로 여러분은 한번에 시험을 패스하실수 있습니다.
우리 ITExamDump 에는 최신의Juniper JN0-643학습가이드가 있습니다. ITExamDump의 부지런한 IT전문가들이 자기만의 지식과 끊임없는 노력과 경험으로 최고의Juniper JN0-643합습자료로Juniper JN0-643인증시험을 응시하실 수 있습니다.Juniper JN0-643인증시험은 IT업계에서의 비중은 아주 큽니다. 시험신청하시는분들도 많아지고 또 많은 분들이 우리ITExamDump의Juniper JN0-643자료로 시험을 패스했습니다. 이미 패스한 분들의 리뷰로 우리ITExamDump의 제품의 중요함과 정확함을 증명하였습니다.
ITExamDump 는 완전히 여러분이 인증시험 준비와 안전한 시험패스를 위한 완벽한 덤프제공 사이트입니다.우리 ITExamDump의 덤프들은 응시자에 따라 ,시험 ,시험방법에 따라 알 맞춤한 퍼펙트한 자료입니다.여러분은 ITExamDump의 알맞춤 덤프들로 아주 간단하고 편하게 인증시험을 패스할 수 있습니다.많은 it인증관연 응시자들은 우리 ITExamDump가 제공하는 문제와 답으로 되어있는 덤프로 자격증을 취득하셨습니다.우리 ITExamDump 또한 업계에서 아주 좋은 이미지를 가지고 있습니다.
성공으로 향하는 길에는 많은 방법과 방식이 있습니다. Juniper인증 JN0-643시험을 패스하는 길에는ITExamDump의Juniper인증 JN0-643덤프가 있습니다. ITExamDump의Juniper인증 JN0-643덤프는 실제시험 출제방향에 초점을 두어 연구제작한 시험준비공부자료로서 높은 시험적중율과 시험패스율을 자랑합니다.국제적으로 승인해주는 IT자격증을 취득하시면 취직 혹은 승진이 쉬워집니다.
시험 번호/코드: JN0-643
시험 이름: Juniper (Enterprise Routing and Switching, Professional (JNCIP-ENT))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 103 문항
업데이트: 2013-12-16
JN0-643 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-643.html
NO.1 Click the Exhibit button.
Based on the output shown in the exhibit, why is VSTP not working for VLAN 100?
A. No interfaces are assigned to VLAN 100.
B. Your MSTI is misconfigured.
C. RSTP is configured in addition to VSTP.
D. No native VLAN is configured.
Answer: A
Juniper JN0-643 JN0-643
NO.2 Which two LSA types are only generated by an ABR router? (Choose two.)
A. ASBR summary LSA (Type 4)
B. ASBR LSA (Type 5)
C. Summary LSA (Type 3)
D. Router LSA (Type 1)
Answer: A,C
Juniper기출문제 JN0-643기출문제 JN0-643인증 JN0-643덤프
NO.3 If your WAN-edge router is multihomed to different ISPs, which two BGP attributes would you modify to
affect outbound traffic? (Choose two.)
A. MED
B. origin
C. local preference
D. community
Answer: B,C
Juniper JN0-643 JN0-643덤프
NO.4 A medium-sized enterprise has some devices that are 802.1X capable and some that are not. Any
device that fails authentication must be provided limited access through a VLAN called NONAUTH. How
do you provide this access?
A. Configure NONAUTH VLAN as the guest VLAN.
B. Configure NONAUTH VLAN as the server-reject VLAN.
C. Configure NONAUTH VLAN as the guest VLAN and the server-reject VLAN
D. Configure a separate VLAN for each type of user: 802.1X and non-802.1X.
Answer: C
Juniper JN0-643자료 JN0-643 JN0-643최신덤프 JN0-643 JN0-643
NO.5 Click the Exhibit button.
A user on port ge-0/0/12 fails an 802.1x authentication attempt.
What is the next action of Switch A?
A. It puts the Authenticator in the HELD status where all EAPOL packets are discarded until the default
hold timer expires.
B. It communicates with the RADIUS server to confirm the user's password.
C. It transmits an EAP-Identity-Request packet immediately after it sends out EAP-Failure.
D. It tries to authenticate the user using MAC radius authentication.
Answer: C
Juniper인증 JN0-643 JN0-643인증 JN0-643시험문제
NO.6 Click the Exhibit button.
Based on the configuration in the exhibit, why are you seeing drops in the best-effort queue on the SRX
Series platform.?
A. The drop-profile fill level is set too low.
B. Packets are dropped by a firewall policy.
C. The best-effort queue is being shaped.
D. The scheduler is not being applied correctly.
Answer: C
Juniper JN0-643 JN0-643기출문제 JN0-643시험문제 JN0-643자료 JN0-643
NO.7 Click the Exhibit button.
Referring to the output in the exhibit, why does the router prefer the path toward interface ge0/0/0.0 for the
20.0.0.0/8 route?
A. The origin is IGP.
B. The origin is unknown.
C. The AS path is longer.
D. Multihop is enabled.
Answer: A
Juniper기출문제 JN0-643 JN0-643 dump
NO.8 Click the Exhibit button.
The exhibit shows the output of an OSPF router LSA.
Which interface ID represents the router's loopback address?
A. ID 10.1.1.0
B. ID 10.0.3.4
C. ID 10.0.3.3
D. ID 10.0.2.4
Answer: B
Juniper최신덤프 JN0-643 JN0-643자료 JN0-643 JN0-643
NO.9 When 802.1X, MAC-RADIUS, and Captive Portal are enabled on an interface, which
authentication sequence occurs?
A. The authentication sequence is based on the order of the configuration.
B. If MAC-RADIUS is rejected, Captive Portal will start. If Captive portal is timed out, 802.1X will start.
C. If 802.1X times out, then MAC-RADIUS will start. If MAC-RADIUS is timed out by the RADIUS server,
then Captive Portal will start.
D. If 802.1X times out, then MAC-RADIUS will start. If MAC-RADIUS is rejected by the RADIUS server,
then Captive Portal will start.
Answer: D
Juniper pdf JN0-643 JN0-643기출문제 JN0-643 pdf JN0-643 JN0-643
NO.10 Click the Exhibit button.
Based on the output shown in the exhibit, which protocol is configured?
A. MSTP
B. RSTP
C. STP
D. VSTP
Answer: D
Juniper덤프 JN0-643 JN0-643 JN0-643덤프 JN0-643 JN0-643
NO.11 Port authentication falls back to Captive Portal. In which two scenarios would the port
authentication move back to 802.1X? (Choose two.)
A. if any MAC RADIUS request packet is received on the interface and if there are no sessions in
authenticated/authenticating state
B. if Captive Portal is deactivated on the interface
C. if the user gets logged out
D. if the EAP packet is received on the interface and if there are no sessions in
authenticated/authenticating state
Answer: B,D
Juniper JN0-643 JN0-643시험문제 JN0-643시험문제
NO.12 A user complains about connectivity problems from their IP address (10.1.1.87) to a server
(10.65.1.100).Which Junos command can help verify connectivity in the network? (Choose two.)
A. mroute
B. traceoptions
C. ping
D. clear bgp neighbor
Answer: B,C
Juniper JN0-643인증 JN0-643덤프
NO.13 Click the Exhibit button.
In the exhibit, which statement about the ABR between Area 8 and Area 2 is true?
A. The router has connectivity to all areas.
B. The router has connectivity to Area 8 only.
C. The router has connectivity to Area 2 only.
D. The router has connectivity to all routers in Area 8 and Area 2.
Answer: D
Juniper시험문제 JN0-643 JN0-643기출문제 JN0-643 JN0-643
NO.14 Click the Exhibit button.
Host 1, Host 2, and Host 3 are connected to Switch A on interface ge-0/0/2. Host 1 and Host 2 have been
authenticated through 802.1X, however Host 3 does not have an 802.1X supplicant.
Referring to the configuration in the exhibit, how can Host 3 be authenticated?
A. secure-authentication option of HTTP or HTTPS must be configured for Captive Portal.
B. MAC RADIUS authentication must be configured for Host 3 instead of Captive Portal.
C. A new authentication-profile must be configured because 802.1X and Captive Portal cannot have the
same authentication-profile.
D. The 802.1X server failback feature must be configured for Host 3 to allow non-802.1X clients to
authenticate.
Answer: B
Juniper pdf JN0-643 pdf JN0-643 JN0-643 dumps
NO.15 What is the default LLDP timeout?
A. 60 seconds
B. 90 seconds
C. 120 seconds
D. infinite
Answer: C
Juniper dump JN0-643 JN0-643 JN0-643자료
ITexamdump의 M70-301덤프의 VCE테스트프로그램과 1Z1-061덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 JN0-696시험에 대비한 고품질 덤프와 HP2-Z27시험 최신버전덤프를 제공해드립니다. 최고품질 HP2-K34시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기