2013년 12월 17일 화요일

Juniper 인증한 JN0-380 덤프

만약Juniper인증JN0-380시험을 통과하고 싶다면, Pass4Tes의 선택을 추천합니다. Pass4Tes선택은 가장 적은 투자로 많은 이익을 가져올 수 있죠, Pass4Tes에서 제공하는Juniper인증JN0-380시험덤프로 시험패스는 문제없스니다. ITExamDump는 전문적으로 it인증시험관련문제와 답을 만들어내는 제작팀이 있으며, Pass4Tes 이미지 또한 업계에서도 이름이 있답니다

Juniper인증JN0-380시험준비를 하고 계시다면ITExamDump에서 출시한Juniper인증JN0-380덤프를 제일 먼저 추천해드리고 싶습니다. ITExamDump제품은 여러분들이 제일 간편한 방법으로 시험에서 고득점을 받을수 있도록 도와드리는 시험동반자입니다. Juniper인증JN0-380시험패는ITExamDump제품으로 고고고!

시험 번호/코드: JN0-380
시험 이름: Juniper (Wireless LAN, Specialist (JNCIS-WLAN))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 86 문항
업데이트: 2013-12-16

Juniper인증JN0-380시험을 패스하기가 어렵다고 하면 합습가이드를 선택하여 간단히 통과하실 수 잇습니다. 우리ITExamDump에서는 무조건 여러분을 위하여 관연 자료덤프 즉 문제와 답을 만들어낼 것입니다. 우리덤프로Juniper인증JN0-380시험준비를 잘하시면 100%Juniper인증JN0-380시험을 패스할 수 있습니다. ITExamDump덤프로 여러분은Juniper인증JN0-380시험을 패스는 물론 여러분의 귀증한 간도 절약하실 수 있습니다.

IT업계에 종사하는 분이 점점 많아지고 있는 지금 IT인증자격증은 필수품으로 되었습니다. IT인사들의 부담을 덜어드리기 위해ITExamDump는Juniper인증 JN0-380인증시험에 대비한 고품질 덤프를 연구제작하였습니다. Juniper인증 JN0-380시험을 준비하려면 많은 정력을 기울여야 하는데 회사의 야근에 시달리면서 시험공부까지 하려면 스트레스가 이만저만이 아니겠죠. ITExamDump 덤프를 구매하시면 이제 그런 고민은 끝입니다. 덤프에 있는 내용만 공부하시면 IT인증자격증 취득은 한방에 가능합니다.

JN0-380 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-380.html

NO.1 You have installed your AP in the proper location on your network. The AP needs to obtain
configuration information from a controller before it can support wireless clients.
What are three methods that an AP uses to do this? (Choose three.)
A. ICMP ping
B. Keepalive packets
C. DNS Lookup
D. L2 Broadcast
E. DHCP Option 43
Answer: C,D,E

Juniper최신덤프   JN0-380   JN0-380자격증   JN0-380

NO.2 What is the maximum allowed configurable SSIDs per radio?
A. 8
B. 16
C. 32
D. 64
Answer: C

Juniper dump   JN0-380   JN0-380자격증   JN0-380   JN0-380 dumps

NO.3 A user repeatedly calls in to the Help desk complaining about their wireless connection.
Which actions would test the user's wireless connectivity from RingMaster?
A. Locate the client in the client tools screen using the Find Clients tab. Once the client is located,
run the Location History option to find out if the client is near a functioning access point.
B. Locate the client in the client tools screen using the Find Clients tab. Once the client is located,
run the RF ping test to determine RSSI and retry counts to verify the RF environment being
reported by the AP to which the client is connected.
C. Locate the client in the client tools screen using the Find Clients tab. Once the client is located,
choose to terminate the client from the wireless network so they can reestablish a new session.
D. Locate the client in the client tools screen using the Find Clients tab. Once the client is located,
add the client to the Watched Client list to gather additional data on the clients signal strength and
data throughput.
Answer: B

Juniper   JN0-380 dumps   JN0-380 dump   JN0-380   JN0-380

NO.4 Which Juniper Networks WLA model supports spectrum analysis?
A. WLA371
B. WLA422
C. WLA532
D. WLA632
Answer: C

Juniper   JN0-380인증   JN0-380   JN0-380

NO.5 What is the hardware requirement for a RingMaster client?
A. Intel/AMD x86-compatible dual core processor, 2.0Ghz, 2GB RAM, 512 MB HD space
B. Intel/AMD x86-compatible single core processor, 2.0Ghz, 2GB RAM, 512 MB HD space
C. Intel/AMD x86-compatible single core processor, 2.0Ghz, 1GB RAM, 1024 MB HD space
D. Intel/AMD x86-compatible dual core processor, 1.0Ghz, 1GB RAM, 512 MB HD space
Answer: A

Juniper기출문제   JN0-380인증   JN0-380덤프   JN0-380인증   JN0-380   JN0-380
6. During the installation of RingMaster, you receive the installation error: "HTTPS Server port is
already in use. Please select another port."
What should you do to resolve this issue?
A. Change the HTTPS Server port number to 443.
B. Change the HTTPS Server port number so that it does not conflict with other applications.
C. Restart the installation process so that RingMaster can resolve the issue.
D. Change the SNMP Trap Receiver port to 162.
Answer: B

Juniper   JN0-380 dumps   JN0-380최신덤프
7. You are asked to troubleshoot a communication problem between a WLC and a RADIUS server.
You verified that the RADIUS server is reachable from the WLC.
Which WLC CLI command would be used for troubleshooting RADIUS connectivity?
A. rfping
B. show authentication
C. ping
D. radping
Answer: D

Juniper최신덤프   JN0-380   JN0-380   JN0-380 dumps   JN0-380 dump   JN0-380
8. In an auditorium, you have 200 wireless clients connecting to the wireless network. You want
to
configure RF load balancing to distribute client sessions across multiple APs in the area.
Which two parameters are configurable to achieve this? (Choose two.)
A. setting strictness
B. configuring auto-tune
C. defining transmit rates
D. setting band preference
Answer: A,D

Juniper pdf   JN0-380 dumps   JN0-380   JN0-380   JN0-380덤프
9. You want to provide secure wireless services to one set of clients on your network and allow
open
access services to your guest clients. You need to configure service profiles for each type of
access to the network.
Which three methods are used to accomplish this? (Choose three.)
A. Configure one service per WLA.
B. Configure an encryption type.
C. Configure IP addresses.
D. Configure SSIDs.
E. Configure VLANs.
Answer: B,D,E

Juniper자격증   JN0-380기출문제   JN0-380   JN0-380
10. Multiple users are complaining that their wireless connections are not working.
Which RingMaster screen would the administrator use for troubleshooting?
A. Alarms
B. Clients
C. Monitor
D. Verification
Answer: C

Juniper dumps   JN0-380   JN0-380인증   JN0-380 dumps

ITexamdump의 C_TFIN52_64덤프의 VCE테스트프로그램과 MB6-700덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 00M-620시험에 대비한 고품질 덤프와 NS0-155시험 최신버전덤프를 제공해드립니다. 최고품질 HP2-N35시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-380.html

댓글 없음:

댓글 쓰기