IT업계 종사자라면 누구나 SAP 인증C-TBIT44-71시험을 패스하고 싶어하리라고 믿습니다. 많은 분들이 이렇게 좋은 인증시험은 아주 어렵다고 생각합니다. 네 맞습니다. 패스할 확율은 아주 낮습니다. 노력하지 않고야 당연히 불가능한 일이 아니겠습니까? SAP 인증C-TBIT44-71 시험은 기초 지식 그리고 능숙한 전업지식이 필요 합니다. ITExamDump는 여러분들한테SAP 인증C-TBIT44-71시험을 쉽게 빨리 패스할 수 있도록 도와주는 사이트입니다. ITExamDump의SAP 인증C-TBIT44-71시험관련 자료로 여러분은 짧은 시간내에 간단하게 시험을 패스할수 있습니다. 시간도 절약하고 돈도 적게 들이는 이런 제안은 여러분들한테 딱 좋은 해결책이라고 봅니다.
SAP인증 C-TBIT44-71시험을 어떻게 공부하면 패스할수 있을지 고민중이시면 근심걱정 버리시고ITExamDump 의 SAP인증 C-TBIT44-71덤프로 가보세요. 문항수가 적고 적중율이 높은 세련된SAP인증 C-TBIT44-71시험준비 공부자료는ITExamDump제품이 최고입니다.
만약ITExamDump선택여부에 대하여 망설이게 된다면 여러분은 우선 우리ITExamDump 사이트에서 제공하는SAP C-TBIT44-71관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. 우리ITExamDump는 여러분이 안전하게SAP C-TBIT44-71시험을 패스할 수 있는 최고의 선택입니다. ITExamDump을 선택함으로써 여러분은 성공도 선택한것이라고 볼수 있습니다.
아무런 노력을 하지 않고 승진이나 연봉인상을 꿈꾸고 있는 분이라면 이 글을 검색해낼수 없었을것입니다. 승진이나 연봉인상을 꿈꾸면 승진과 연봉인상을 시켜주는 회사에 능력을 과시해야 합니다. IT인증시험은 국제적으로 승인해주는 자격증을 취득하는 시험입니다. ITExamDump의SAP인증 C-TBIT44-71덤프의 도움으로 SAP인증 C-TBIT44-71시험을 패스하여 자격증을 취득하면 승진이나 연봉인상의 꿈이 이루어집니다. 결코 꿈은 이루어질것입니다.
ITExamDump의 SAP인증 C-TBIT44-71시험덤프자료는 여러분의 시간,돈 ,정력을 아껴드립니다. 몇개월을 거쳐 시험준비공부를 해야만 패스가능한 시험을ITExamDump의 SAP인증 C-TBIT44-71덤프는 며칠간에도 같은 시험패스 결과를 안겨드릴수 있습니다. SAP인증 C-TBIT44-71시험을 통과하여 자격증을 취득하려면ITExamDump의 SAP인증 C-TBIT44-71덤프로 시험준비공부를 하세요.
시험 번호/코드: C-TBIT44-71
시험 이름: SAP (SAP Certified Development Associate - Process Integration with SAP NetWeaver (PI 7.1))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 80 문항
업데이트: 2013-11-12
C-TBIT44-71 덤프무료샘플다운로드하기: http://www.itexamdump.com/C-TBIT44-71.html
NO.1 You configure the sender RFC adapter to convert RFC calls from a sender to XML
messages. These
XML messages are then sent to the Integration Server or to the PCK.
What is the purpose of the RFC adapter parameter "Program ID"?
A. The Program ID is a unique identifier for outbound proxies.
B. The Program ID must uniquely describe the RFC sender communication channel in the
configured
application server gateway.
C. The Program ID identifies proxy classes for Service Interfaces.
D. The Program ID is used in correlation for binding abstract interfaces.
Answer: B
SAP C-TBIT44-71 C-TBIT44-71 dump
NO.2 You have implemented a scenario where IDocs are posted to an ERP system using the
receiver IDoc
adapter.
Which statements correctly describe the receiver IDoc adapter of SAP NetWeaver PI?
A. IDoc packages are not supported, unless all IDocs are collected by BPM.
B. Specific fields in the IDoc control record can be overwritten using the 'header mapping'
functionality in
the Receiver Agreement.
C. Quality of service EOIO (exactly once in order) is supported, provided that the target
system is a SAP
Web AS 6.40 or above.
D. If the target system is SAP Web AS 6.20 or under, then the quality of service BE (best
effort) and EO
(exactly once) can be used.
E. A receiver communication channel must be defined in the Integration Builder.
Answer: B,C,E
SAP C-TBIT44-71시험문제 C-TBIT44-71 pdf C-TBIT44-71자격증 C-TBIT44-71기출문제 C-TBIT44-71시험문제
NO.3 You have created a deadline branch. When the deadline has expired, the integration
process should be
canceled.
How can this be achieved?
A. In the deadline branch, insert a control step that cancels the process.
B. The process is automatically stopped once the deadline has expired.
C. As the process can only be stopped by the administrator, a control step that raises an alert
to inform
the administrator has to be inserted.
D. Insert a switch with an appropriate condition to stop the process.
Answer: A
SAP C-TBIT44-71 C-TBIT44-71 C-TBIT44-71
NO.4 To react to situations where it is not possible or not advisable to continue a process in
the normal way,
you can define exceptions.
Which statements correctly describe the triggering of exceptions?
A. A synchronous or asynchronous Send step can trigger an exception when a system error
occurs.
B. Every step type can trigger an exception when a permanent error occurs.
C. A Control step can trigger an exception.
D. A Transformation step can trigger an exception.
E. Exceptions can only be triggered by Control steps.
Answer: A,C,D
SAP덤프 C-TBIT44-71 dump C-TBIT44-71 C-TBIT44-71
NO.5 If a system error occurs in a send step, an alert can be triggered for Alert Management
and the
integration process should then be terminated.
Where do you define the Alert Category for the appropriate Control Step?
A. Within the SLD
B. Within the transaction ALRTCATDEF on the Integration Server
C. Within the Enterprise Services Builder
D. Within the Process Editor
Answer: B
SAP dump C-TBIT44-71자료 C-TBIT44-71 C-TBIT44-71 C-TBIT44-71 C-TBIT44-71인증
NO.6 Which Process Integration objects can be used in an integration process?
A. All objects displayed in the navigation area of the Integration Builder.
B. All objects within the software component version of the integration process.
C. Only the objects within the namespace of the integration process.
D. All objects displayed in the Process Integration Scenario using this process.
Answer: B
SAP시험문제 C-TBIT44-71시험문제 C-TBIT44-71 C-TBIT44-71자료
NO.7 Which of these operations can be performed by a Container Operation step?
A. Incrementing a counter variable.
B. Appending a message to a multiline container element.
C. Removing a message from a multiline container element.
D. Setting the value of an XML element of a message.
Answer: A,B
SAP시험문제 C-TBIT44-71 C-TBIT44-71 C-TBIT44-71 C-TBIT44-71
NO.8 You can create multiple configurations for one Integration Process without changing the
appropriate
process definition.
Which of these parameters allows you to achieve this behavior?
A. Process Signature
B. Container Definition
C. Correlation
D. Configurable Parameters in Conditions
Answer: D
SAP C-TBIT44-71자격증 C-TBIT44-71최신덤프
NO.9 The PI Mail adapter is used to send and receive emails. Which protocols are
supported?
A. SMTP
B. HTTP
C. IMAP4
D. POP3
Answer: A,C,D
SAP pdf C-TBIT44-71 pdf C-TBIT44-71기출문제 C-TBIT44-71
NO.10 Assume that your customer has a scenario in which a database table needs to be
queried (i.e. to
perform a SELECT statement and obtain the result set).
What are the viable options for implementing this with the PI JDBC adapter?
A. Use the sender JDBC adapter to query the database asynchronously.
B. Use the sender JDBC adapter to query the database synchronously.
C. Use the receiver JDBC adapter to query the database synchronously.
D. Use the receiver JDBC adapter to query the database asynchronously.
Answer: A,C
SAP C-TBIT44-71최신덤프 C-TBIT44-71
NO.11 A special aspect in B2B business processes is that the business partners involved in
these processes
do not usually provide information about their internal system landscape.
Which configuration objects are relevant for B2B configuration?
A. Receiver Determination
B. Communication Party
C. Software Component Version (SWCV)
D. Communication Channel
Answer: A,B,D
SAP자격증 C-TBIT44-71최신덤프 C-TBIT44-71 C-TBIT44-71자료
NO.12 You are implementing an IDoc-based scenario using SAP Netweaver PI and more
specifically the
sender IDoc adapter.
Which of these steps are mandatory for the sender IDoc adapter to function properly?
A. IDoc metadata must be imported into the Enterprise Services Repository.
B. The Logical System name (ALE name) for the Business System must be defined in the
SLD.
C. A sender communication channel must be defined in the Integration Builder.
D. An RFC destination must be defined on the sender system, pointing to the Integration
Server client.
Answer: A,B,D
SAP C-TBIT44-71 C-TBIT44-71 C-TBIT44-71
NO.13 The communication between the Integration Server and the backend applications can
be achieved
without adapters.
Which message protocol should you use for this communication type?
A. RFC-XML
B. PI-SOAP Protocol
C. File
D. JDBC 2.0
Answer: B
SAP C-TBIT44-71 C-TBIT44-71 C-TBIT44-71자격증
NO.14 Which statements are correct when using the Receiver File adapter to process XML
messages?
A. The messages are processed based on a poll cycle.
B. The adapter can convert the XML payload into a flat file.
C. The adapter can FTP the file to a remote directory.
D. The quality of service can be 'best effort' (BE) only.
Answer: B,C
SAP인증 C-TBIT44-71 dump C-TBIT44-71
NO.15 For the delivery mode of an integration process, you can choose between inbound
processing with or
without buffering.
Which of these statements correctly describes the Inbound processing mode?
A. SAP recommends the mode for inbound processing with buffering.
B. SAP recommends the mode for inbound processing without buffering.
C. If you select inbound processing without buffering, the qRFC entry returns an error when a
message is
to be delivered to a process instance for which no receive step is active.
D. If you select inbound processing with buffering and there is no active receive step
available to receive
an incoming message, the message is buffered in a separate, process-instance-specific
queue.
Answer: B,C,D
SAP C-TBIT44-71 C-TBIT44-71 C-TBIT44-71 C-TBIT44-71
ITexamdump의 LOT-927덤프의 VCE테스트프로그램과 MB5-858덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-226시험에 대비한 고품질 덤프와 1Z0-033시험 최신버전덤프를 제공해드립니다. 최고품질 70-341시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기