ITExamDump는 IT인증시험 자격증 공부자료를 제공해드리는 전문적인 사이트입니다. ITExamDump제품은 100%통과율을 자랑하고 있습니다. Adobe인증 9A0-057시험이 어려워 자격증 취득을 망설이는 분들이 많습니다. ITExamDump가 있으면 이런 걱정은 하지 않으셔도 됩니다. ITExamDump의Adobe인증 9A0-057덤프로 시험을 한방에 통과하여 승진이나 연봉인상에 도움되는 자격증을 취득합시다.
ITExamDump전문가들은Adobe 9A0-057인증시험만을 위한 특별학습가이드를 만들었습니다.Adobe 9A0-057인증시험을 응시하려면 30분이란 시간만 투자하여 특별학습가이드로 빨리 관련지식을 장악하고,또 다시 복습하고 안전하게Adobe 9A0-057인증시험을 패스할 수 잇습니다.자격증취득 많은 시간과 돈을 투자한 분들보다 더 가볍게 이루어졌습니다
시험 번호/코드: 9A0-057
시험 이름: Adobe (Adobe Illustrator CS3 ACE Exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 130 문항
업데이트: 2013-11-20
최근 IT 업종에 종사하는 분들이 점점 늘어가는 추세하에 경쟁이 점점 치열해지고 있습니다. IT인증시험은 국제에서 인정받는 효력있는 자격증을 취득하는 과정으로서 널리 알려져 있습니다. ITExamDump의 Adobe인증 9A0-057덤프는IT인증시험의 한 과목인 Adobe인증 9A0-057시험에 대비하여 만들어진 시험전 공부자료인데 높은 시험적중율과 친근한 가격으로 많은 사랑을 받고 있습니다.
ITExamDump는IT업계전문가들이 그들의 노하우와 몇 년간의 경험 등으로 자료의 정확도를 높여 응시자들의 요구를 만족시켜 드립니다. 우리는 꼭 한번에Adobe 9A0-057시험을 패스할 수 있도록 도와드릴 것입니다. 여러분은Adobe 9A0-057시험자료 구매로 제일 정확하고 또 최신시험버전의 문제와 답을 사용할 수 있습니다. Pass4Tes의 인증시험적중 율은 아주 높습니다. 때문에 많은 IT인증시험준비중인분들에세 많은 편리를 드릴수 있습니다.100%정확도 100%신뢰.여러분은 마음편히 응시하시면 됩니다.
수많은Adobe인증 9A0-057시험공부자료중에서ITExamDump의Adobe인증 9A0-057덤프가 가장 출중한 원인은 무엇일가요? ITExamDump의Adobe인증 9A0-057덤프는 실제시험문제의 출제방향을 연구하여 IT전문가로 되어있는 덤프제작팀이 만든 최신버전 덤프입니다. ITExamDump의Adobe인증 9A0-057덤프가 있으면 힘든Adobe인증 9A0-057시험이 쉬어져서 자격증을 제일 빠른 시간내에 취득할수 있습니다.제일 어려운 시험을 제일 간단한 방법으로 패스하는 방법은ITExamDump의Adobe인증 9A0-057덤프로 시험준비 공부를 하는것입니다.
9A0-057 덤프무료샘플다운로드하기: http://www.itexamdump.com/9A0-057.html
NO.1 You want to edit one line of type that is part of a paragraph in an existing document. Which tool should
you use?
A. Rectangle
B. Eraser
C. Area Type
D. Lasso
Answer: C
Adobe 9A0-057 9A0-057 9A0-057 9A0-057 dumps
NO.2 You want to create a paragraph of justified text and hang the punctuation so that the right and left
sides of the paragraph maintain a clean, aligned appearance. What should you do?
A. Select the type object and choose Type > Optical Margin Alignment.
B. Use the Smart Punctuation command and enable Smart Quotes.
C. Enable Discretionary Ligatures in the OpenType panel.
D. Enable Optical Tracking in the Character panel.
Answer: A
Adobe 9A0-057 9A0-057 9A0-057최신덤프
NO.3 You are creating a drawing of a series of birds in flight. You draw a bird and you want to duplicate it
and change the angle of its direction. Each bird must rotate at an angle of 15 degrees from the last bird.
What should you do?
A. Select the bird and double-click the Rotate tool. Apply a 15-degree angle and click the Copy button to
copy the original bird.
B. Copy and paste the original bird. Use the Rotate tool to rotate the bird by using your mouse.
C. Use the Shear tool to select the bird. Apply a 15-degree angle and click the Copy button to copy the
original bird.
D. Use the Reflect tool to select the bird. Apply a 15-degree angle and click the Copy button to copy the
original bird.
Answer: A
Adobe 9A0-057기출문제 9A0-057
NO.4 You convert a photograph to a black and white line art image by using the Live Trace command. You
want to add a few colors to the photo. You choose Object > Live Trace > Tracing Options. What should
you do?
A. Change Mode to Color and adjust the Resample resolution.
B. Select Adjusted Image from the Raster drop-down list and select the Output to Swatches check box.
C. Change Mode to Color and increase the value in Max Colors.
D. Specify a value for Minimum Area and select the Output to Swatches check box.
Answer: C
Adobe기출문제 9A0-057 9A0-057 9A0-057최신덤프
NO.5 You want to change an object's fill from solid to a gradient. You create the gradient and fill another
object in your document. What should you do to apply the gradient fill to the object?
A. Select the object and use the Eyedropper tool to select the gradient fill.
B. Select the object and use the Paint Brush tool to apply the gradient fill.
C. Select the object and use the Gradient tool to apply the gradient fill.
D. Select the gradient pattern in the Swatches panel.
Answer: A
Adobe최신덤프 9A0-057 9A0-057자료 9A0-057자료 9A0-057자료
NO.6 You have an Illustrator document that has decorative ornament characters. You want to view all other
ornaments that are available in the fonts that are used in the document. Which panel should you use?
A. Character
B. Control
C. Glyphs
D. Character Styles
Answer: C
Adobe자격증 9A0-057덤프 9A0-057 9A0-057 dumps
NO.7 You open a legacy document, loading the same font that was used during the document creation.
When you compare this document with a hard copy of the original document, you discover that the type in
the new document has reflowed. Why does this happen?
A. The type is converted to outline.
B. The file is saved in the EPS format.
C. The OpenType contextual alternates are enabled.
D. The type engines in Illustrator versions are different.
Answer: D
Adobe 9A0-057 dumps 9A0-057최신덤프 9A0-057자격증
NO.8 You want to create an object to be used at several locations on a poster. You draw the object in a
document, save the object as a symbol, and apply the symbol multiple times. You want to change the
color of the original object without affecting the existing symbols applied to the poster. What should you
do?
A. Copy and paste the symbol in the document to break the link with the Symbols panel.
B. Select each object in the poster and click the Break Link to Symbol button in the Symbols panel.
C. Select the applied symbols in the poster and choose Expand to break the link.
D. Select the object and choose Redefine Symbol in the Symbols panel menu to break the link.
Answer: B
Adobe dumps 9A0-057 dumps 9A0-057 9A0-057
NO.9 You want to apply color to the headline of an advertisement. The gradient fill of the color must
complement the background image that is placed as a link in the document. You create a linear gradient
and apply the gradient to the type, but the type remains black. What should you do?
A. Drag the gradient onto the type with the Gradient tool.
B. Sample the gradient with the Eyedropper tool and apply it to the headline type.
C. Create a character style defining the gradient fill as a Character Color attribute and apply it to the
headline.
D. Use the Create Outlines command to make paths from the headline type and apply the gradient.
Answer: D
Adobe덤프 9A0-057 9A0-057 dump 9A0-057 9A0-057
NO.10 You want to create an object by using a tool that allows you to connect lines and curves. The lines
must be smooth and the anchor points must be placed at all positions where a line or a curve changes
direction. Which tool should you use?
A. Pencil
B. Brush
C. Pen
D. Line
Answer: C
Adobe 9A0-057기출문제 9A0-057자격증 9A0-057
NO.11 You create a grouped set of objects and apply an opacity setting from 10 percent to 50 percent. You
want the set of objects to blend with the background without having an overlapping effect. What should
you do?
A. Apply Isolate Blending.
B. Apply Knockout Group.
C. Apply the Opacity & Mask Define Knockout shape.
D. Increase the opacity of all objects.
Answer: B
Adobe 9A0-057 dumps 9A0-057 9A0-057 9A0-057
NO.12 You create an object by using the Pen tool and apply a 1 point stroke to the object. You want to
change the stroke to a calligraphic brush stroke without redrawing the object. What should you do?
A. Use the Brush tool to change the stroke to a calligraphic brush stroke.
B. Select the stroke and change it by using the Stroke panel.
C. Select the stroke and update the stroke in the Brushes panel.
D. Open the Brushes panel and click the Options of Selected Object button.
Answer: C
Adobe시험문제 9A0-057 9A0-057 9A0-057 dumps
NO.13 What is the advantage of using an Envelope Distort warp on type artwork over applying a warp effect?
A. Envelope Distort allows you to encode the artwork by embedding the font in the Illustrator document.
B. Envelope Distort allows you to modify the shape of the envelope with the Direct Selection tool.
C. Envelope Distort allows you to create outlines and therefore, you are able to apply gradients and other
effects to the type.
D. Envelope Distort allows you to edit the effect after it is applied.
Answer: B
Adobe 9A0-057 9A0-057기출문제 9A0-057
NO.14 You want to distort a rectangle by using the Envelope Distort option from the Object menu. What
should you do?
A. Choose Make with Mesh and select the rows and columns to distort the rectangle.
B. Choose Make with Warp and select the Style and Bend to distort the rectangle.
C. Choose Envelope Options and select the Distort Appearance check box in the Envelope Options
dialog box.
D. Choose Make with Top Object to distort the rectangle.
Answer: B
Adobe 9A0-057 pdf 9A0-057 9A0-057
NO.15 You create a logo and add a patterned background to it. In the Appearance panel, you duplicate the fill
and create a gradient fill on the top of the patterned background. However, you are unable see the pattern
fill below the gradient fill. What should you do?
A. Change the stacking order to place the pattern background in front of the gradient.
B. Select the Reduce to Basic Appearance option in the Appearance panel.
C. Select the gradient fill and apply a blend mode.
D. Change the opacity settings of the pattern.
Answer: C
Adobe 9A0-057 dumps 9A0-057 dump 9A0-057 9A0-057자격증 9A0-057
NO.16 You create a new paragraph style from a selected, formatted paragraph and apply it as you type in
more text. You then decide to decrease the type size of the style by 1 point. The change is reflected in all
styled paragraphs except the original paragraph in which the paragraph style was defined. Why does this
happen?
A. The original formatted paragraph was legacy text.
B. The original text was imported from Microsoft Word. The Word formatting was still retained by the text,
overriding the Illustrator paragraph style.
C. Character styles were created after the paragraph style was applied to the other paragraphs.
D. The paragraph style was not applied to the selected text after creating the paragraph style from the
selected paragraph.
Answer: D
Adobe자격증 9A0-057 9A0-057 9A0-057 pdf 9A0-057기출문제
NO.17 You create an object and now you want to increase its size proportionately by 10 percent. You select
the object. What should you do?
A. Use the Scale tool while holding the OPTION key on a Mac computer or the ALT key on a
Windows-based computer.
B. Use the Free Transform tool.
C. Choose Show Bounding Box, and pull one corner of the object in the direction you wish to scale.
D. Double-click the Scale tool, and choose the Uniform option.
Answer: D
Adobe덤프 9A0-057 9A0-057 dump 9A0-057기출문제
NO.18 Click the Exhibit button.
You are creating a sales brochure based on a sample provided by your client. In the sample, the
punctuation appears outside the width of the justified type. What should you do to create the desired
effect without affecting the ability to edit the type?
A. Use the Paragraph panel to apply hanging left and right indents when punctuation appears near the
margins.
B. Set up guides on a grid, setting each line individually and positioning each line to force the punctuation
over the guides.
C. Delete the punctuation that falls near the margins and set the punctuation as separate type elements
outside the margins.
D. Use the Paragraph panel to apply Roman Hanging Punctuation.
Answer: D
Adobe시험문제 9A0-057시험문제 9A0-057 9A0-057
NO.19 How does the OpenType font format differ from TrueType and Type 1 fonts?
A. OpenType is a format that can be modified. TrueType and Type 1 fonts CANNOT be modified.
B. OpenType can be used for both desktop printing and Web design. TrueType and Type 1 fonts can only
be used in PostScript printing.
C. OpenType is a cross-platform font format, and TrueType and Type 1 fonts are platform-specific font
formats.
D. OpenType refers to fonts that are outlined. TrueType and Type 1 refer to fonts that are solid.
Answer: C
Adobe 9A0-057 9A0-057 9A0-057자격증 9A0-057시험문제
NO.20 You are creating a conference schedule and want to specify a description for different seminars. The
same typographic attributes, including typeface, leading, and alignment, must be applied to each seminar
description. How should you apply these attributes?
A. Set one paragraph with the desired attributes and use the Bridge application to batch process the
attributes.
B. Create a paragraph style and apply it to the entire text.
C. Set one paragraph with the desired attributes, save as an EPS and place in the file.
D. Create a character style with the desired attributes and apply it to the entire text.
Answer: B
Adobe dumps 9A0-057자료 9A0-057 dump 9A0-057
ITexamdump의 000-274덤프의 VCE테스트프로그램과 000-596덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 MB7-700시험에 대비한 고품질 덤프와 LOT-405시험 최신버전덤프를 제공해드립니다. 최고품질 3I0-012시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기