Juniper JN0-541 시험문제

ITExamDump 안에는 아주 거대한IT업계엘리트들로 이루어진 그룹이 있습니다. 그들은 모두 관련업계예서 권위가 있는 전문가들이고 자기만의 지식과 지금까지의 경험으로 최고의 IT인증관련자료를 만들어냅니다. ITExamDump의 문제와 답은 정확도가 아주 높으며 한번에 패스할수 있는 100%로의 보장도를 자랑하며 그리고 또 일년무료 업데이트를 제공합니다.

ITExamDump의 경험이 풍부한 전문가들이Juniper JN0-541인증시험관련자료들을 계획적으로 페펙트하게 만들었습니다.Juniper JN0-541인증시험응시에는 딱 좋은 자료들입니다. ITExamDump는 최고의 덤프만 제공합니다. 응시 전Juniper JN0-541인증시험덤프로 최고의 시험대비준비를 하시기 바랍니다.

ITExamDump의 Juniper 인증 JN0-541시험덤프공부자료는 pdf버전과 소프트웨어버전 두가지 버전으로 제공되는데 Juniper 인증 JN0-541실제시험예상문제가 포함되어있습니다.덤프의 예상문제는 Juniper 인증 JN0-541실제시험의 대부분 문제를 적중하여 높은 통과율과 점유율을 자랑하고 있습니다. ITExamDump의 Juniper 인증 JN0-541덤프를 선택하시면 IT자격증 취득에 더할것 없는 힘이 될것입니다.

JN0-541는Juniper의 인증시험입니다.JN0-541인증시험을 패스하면Juniper인증과 한 발작 더 내디딘 것입니다. 때문에JN0-541시험의 인기는 날마다 더해갑니다.JN0-541시험에 응시하는 분들도 날마다 더 많아지고 있습니다. 하지만JN0-541시험의 통과 율은 아주 낮습니다.JN0-541인증시험준비중인 여러분은 어떤 자료를 준비하였나요?

여러분은 우선 우리 ITExamDump사이트에서 제공하는Juniper인증JN0-541시험덤프의 일부 문제와 답을 체험해보세요. 우리 ITExamDump를 선택해주신다면 우리는 최선을 다하여 여러분이 꼭 한번에 시험을 패스할 수 있도록 도와드리겠습니다.만약 여러분이 우리의 인증시험덤프를 보시고 시험이랑 틀려서 패스를 하지 못하였다면 우리는 무조건 덤프비용전부를 환불해드립니다.

시험 번호/코드: JN0-541
시험 이름: Juniper (IDP, Associate(JNCIA-IDP))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 230 문항
업데이트: 2013-11-10

성공으로 향하는 길에는 많은 방법과 방식이 있습니다. Juniper인증 JN0-541시험을 패스하는 길에는ITExamDump의Juniper인증 JN0-541덤프가 있습니다. ITExamDump의Juniper인증 JN0-541덤프는 실제시험 출제방향에 초점을 두어 연구제작한 시험준비공부자료로서 높은 시험적중율과 시험패스율을 자랑합니다.국제적으로 승인해주는 IT자격증을 취득하시면 취직 혹은 승진이 쉬워집니다.

한번에Juniper인증JN0-541시험을 패스하고 싶으시다면 완전 페펙트한 준비가 필요합니다. 완벽한 관연 지식터득은 물론입니다. 우리ITExamDump의 자료들은 여러분의 이런 시험준비에 많은 도움이 될 것입니다.

JN0-541 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-541.html

NO.1 Which OSI layer(s) of a packet does the IDP sensor examine?
A. layers 2-7
B. layers 2-4
C. layer 7 only
D. layers 4-7
Answer: A

Juniper   JN0-541   JN0-541기출문제   JN0-541인증   JN0-541자료

NO.2 What is "a deviation from a protocol's expected behavior or packet format"?
A. context
B. compound attack object
C. attack signature
D. protocol anomaly
Answer: D

Juniper자료   JN0-541자격증   JN0-541기출문제

NO.3 Which statement about the Enterprise Security Profiler (ESP) is true?
A. The ESP must be configured and started using the IDP sensor CLI before it is used.
B. The administrator must manually initiate Security Manager to sensor polling to retrieve ESP data.
C. The ESP must be configured and started on each IDP sensor manually, using the Security Manager
GUI.
D. The ESP is started by default in IDP version 4.0 or newer.
Answer: C

Juniper최신덤프   JN0-541자료   JN0-541자격증   JN0-541자료   JN0-541인증

NO.4 A newly re-imaged sensor is running IDP 4.0 code. You want to assign IP address
10.1.1.1 to the sensor. Which method do you use to do this?
A. Connect to the sensor's console port, login as root, and answer theEasyConfig
B. Use SSH to connect to the sensor at IP 192.168.1.1.Login as root, and run ipconfig.
C. Connect to the sensor's console port, login as admin, and answer theEasyConfig
D. Use SSH to connect to the sensor at IP 192.168.1.1.Login as admin, and run ipconfig.
Answer: A

Juniper자료   JN0-541인증   JN0-541 dump

NO.5 What is one use of an IP action?
A. It blocks subsequent connections from specific IP addresses.
B. It modifies the IP header to redirect the attack.
C. It modifies the IP header to prevent the attack.
D. It permits or denies the traffic, based on the IP header.
Answer: A

Juniper시험문제   JN0-541자료   JN0-541   JN0-541시험문제   JN0-541기출문제

NO.6 You update your attack object database on Security Manager. What must you do before the new attack
objects become active on the IDP sensors?
A. You install the updated security policy on the IDP sensor.
B. No changes are required.
C. You must restart the IDP sensor.
D. You must restart the IDP processes on the IDP sensors.
Answer: A

Juniper   JN0-541덤프   JN0-541   JN0-541   JN0-541

NO.7 Which TCP port is used for communication between Security Manager and an IDP sensor?
A. 7801
B. 7800
C. 7803
D. 443
Answer: C

Juniper dump   JN0-541   JN0-541   JN0-541   JN0-541기출문제

NO.8 Which rule base would detect the use of nmap on a network?
A. SYN protector
B. traffic anomalies
C. backdoor
D. exempt
Answer: B

Juniper덤프   JN0-541   JN0-541시험문제   JN0-541

NO.9 Which type of cable do you use for a console connection to an IDP sensor?
A. CAT 5 cable
B. Juniper proprietary cable
C. straight-through serial cable
D. null-modem cable
Answer: D

Juniper   JN0-541 dump   JN0-541덤프

NO.10 Which three fields in a packet must match an IDP rule before that packet is examined for an attack?
(Choose three.)
A. terminate match
B. service
C. destination address
D. source address
E. attack object
Answer: B,C,D

Juniper   JN0-541 dump   JN0-541   JN0-541

NO.11 On a sensor, which command will indicate if log messages are being sent to Security Manager.?
A. scio vr list
B. serviceidp status
C. scio agentstats display
D. scio getsystem
Answer: C

Juniper   JN0-541   JN0-541 pdf   JN0-541

NO.12 After you enable alerts for new hosts that are detected by the Enterprise Security Profiler, where do you
look in Security Manager to see those alerts?
A. Security Monitor > Profiler > Application Profiler tab
B. Security Monitor > Profiler > Violation Viewer tab
C. Security Monitor > Profiler > Network Profiler tab
D. Log Viewer > Profiler Log
Answer: D

Juniper   JN0-541   JN0-541   JN0-541최신덤프

NO.13 Which rule base would detect netcat?
A. SYN protector
B. traffic anomalies
C. backdoor
D. exempt
Answer: C

Juniper   JN0-541인증   JN0-541   JN0-541기출문제

NO.14 Which two will change the management IP of an IDP sensor? (Choose two.)
A. Edit the existing IDP sensor object in Security Manager GUI and change the IP address.
B. Delete the IDP sensor object from Security Manager and re-add the sensor with the new IP address.
C. Useifconfig to change the management IP address.
D. Use the ACM to change the management IP address.
Answer: B,D

Juniper시험문제   JN0-541   JN0-541   JN0-541인증

NO.15 Which command on the IDP sensor CLI can be used to display the sensor statistics, which policy is
installed, and mode of sensor deployment?
A. sctop "s" option
B. sensor statistics can only be displayed from Security Manager GUI
C. scio list s0 sensor stat
D. scio sensor stat
Answer: A

Juniper   JN0-541 pdf   JN0-541   JN0-541   JN0-541

NO.16 Exhibit:
You work as an administrator at Certkiller .com. Study the exhibit carefully. In the exhibit, which SYN
protector mode is the IDP using?
A. passive
B. handshake
C. relay
D. protective
Answer: A

Juniper dump   JN0-541   JN0-541   JN0-541 dumps   JN0-541

NO.17 Which statement is true about the attack object database update process?
A. Each sensor updates its own attack object database automatically; however they must be able to
access the Juniper site on TCP port 443.
B. The attack object database update must be manually performed by the administrator, and the
administrator must manually install it on each sensor.
C. The attack object database update can be initiated manually or automatically.
D. The attack object database update can be automatically scheduled to occur using the Security
Manager GUI.
Answer: C

Juniper   JN0-541   JN0-541자격증   JN0-541

NO.18 When connecting to a sensor using SSH, which account do you use to login?
A. admin
B. super
C. netscreen
D. root
Answer: A

Juniper   JN0-541 pdf   JN0-541   JN0-541시험문제

NO.19 Which statement is true about packet capture in the IDP sensor?
A. The Log Viewer has no indication of whether a log message has associated packet captures.
B. You can only log packets after an attack packet.
C. You can configure a particular number of packets to capture before and after an attack.
D. Packet capture records all packets flowing through the sensor.
Answer: C

Juniper인증   JN0-541   JN0-541자료   JN0-541

NO.20 Which statement is true regarding IDP rule matching on a sensor?
A. Each rule in the IDP rule base that matches on the source IP, destination IP, and service will be
processed further.
B. Each rule in the IDP rule base that matches on the source IP, destination IP, and service will be
processed further, unless the particular rule is terminal.
C. Each rule in the IDP rule base that matches on the source IP, destination IP, service, and attack object
will be processed further.
D. Each rule in the IDP rule base that matches on the source IP, destination IP, service, and attack object
will be processed further, unless the particular rule is terminal.
Answer: B

Juniper   JN0-541   JN0-541 dumps   JN0-541 dumps   JN0-541최신덤프   JN0-541시험문제

ITexamdump의 HP2-H28덤프의 VCE테스트프로그램과 00M-617덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 NS0-156시험에 대비한 고품질 덤프와 70-684시험 최신버전덤프를 제공해드립니다. 최고품질 000-N45시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-541.html