ST0-10X는Symantec의 인증시험입니다.ST0-10X인증시험을 패스하면Symantec인증과 한 발작 더 내디딘 것입니다. 때문에ST0-10X시험의 인기는 날마다 더해갑니다.ST0-10X시험에 응시하는 분들도 날마다 더 많아지고 있습니다. 하지만ST0-10X시험의 통과 율은 아주 낮습니다.ST0-10X인증시험준비중인 여러분은 어떤 자료를 준비하였나요?
Symantec ST0-10X인증시험은 전문적인 관련지식을 테스트하는 인증시험입니다. ITExamDump는 여러분이Symantec ST0-10X인증시험을 통과할 수 잇도록 도와주는 사이트입니다. 많은 분들이 많은 시간과 돈을 들여 혹은 여러 학원 등을 다니면서Symantec ST0-10X인증시험패스에 노력을 다합니다. 하지만 우리ITExamDump에서는 20시간 좌우만 투자하면 무조건Symantec ST0-10X시험을 패스할 수 있도록 도와드립니다.
Symantec인증 ST0-10X시험을 패스하여 자격증을 취득하는게 꿈이라구요? ITExamDump에서 고객님의Symantec인증 ST0-10X시험패스꿈을 이루어지게 지켜드립니다. ITExamDump의 Symantec인증 ST0-10X덤프는 가장 최신시험에 대비하여 만들어진 공부자료로서 시험패스는 한방에 끝내줍니다.
지금21세기 IT업계가 주목 받고 있는 시대에 그 경쟁 또한 상상할만하죠, 당연히 it업계 중Symantec ST0-10X인증시험도 아주 인기가 많은 시험입니다. 응시자는 매일매일 많아지고 있으며, 패스하는 분들은 관련it업계에서 많은 지식과 내공을 지닌 분들뿐입니다.
비스를 제공해드려 아무런 걱정없이 시험에 도전하도록 힘이 되어드립니다. ITExamDump덤프를 사용하여 시험에서 통과하신 분이 전해주신 희소식이 ITExamDump 덤프품질을 증명해드립니다.
시험 번호/코드: ST0-10X
시험 이름: Symantec (Veritas Storage Foundation 5 for Unix (STS))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 198 문항
업데이트: 2014-02-27
아무런 노력을 하지 않고 승진이나 연봉인상을 꿈꾸고 있는 분이라면 이 글을 검색해낼수 없었을것입니다. 승진이나 연봉인상을 꿈꾸면 승진과 연봉인상을 시켜주는 회사에 능력을 과시해야 합니다. IT인증시험은 국제적으로 승인해주는 자격증을 취득하는 시험입니다. ITExamDump의Symantec인증 ST0-10X덤프의 도움으로 Symantec인증 ST0-10X시험을 패스하여 자격증을 취득하면 승진이나 연봉인상의 꿈이 이루어집니다. 결코 꿈은 이루어질것입니다.
ST0-10X 덤프무료샘플다운로드하기: http://www.itexamdump.com/ST0-10X.html
NO.1 You want to allow non-layered volume to change to layered stripe-mirror volume while remaining online.
What is the correct procedure to perform this conversion?
A.Convert the volume, stop the volume, remount the file system, and start the volume.
B.Unmount the file system, stop the volume, convert the volume, start the volume, and remount the file
system.
C.Resync the volume, convert the volume, and mirror the volume.
D.Stop the volume and then convert the volume.
Answer: C
Symantec dumps ST0-10X pdf ST0-10X ST0-10X pdf
NO.2 What is the minimum number of plexes required for true mirroring to provide redundancy of data?
A.One
B.Two
C.Three
D.Four
Answer: B
Symantec ST0-10X덤프 ST0-10X ST0-10X ST0-10X
NO.3 Which command will you use to determine the operating mode of vxconfigd?
A.vxdctl enable
B.vxdctl mode
C.vxmode
D.ps -ef |grep vxconfig
Answer: B
Symantec ST0-10X덤프 ST0-10X자료 ST0-10X
NO.4 The 'Administer' button in the Storage Foundation Management Server user interface for a host is
continually red, and the vxsvc32 agent is listed as DOWN.
How do you solve this problem?
A.Reconfigure the Storage Foundation management Server.
B.Reinstall the agent.
C.Restart Storage Foundation Management Server.
D.Change the types.ini configuration file on the Central Management Server.
Answer: D
Symantec ST0-10X ST0-10X ST0-10X ST0-10X ST0-10X
NO.5 You have installed Storage Foundation 5.0 Standard server with a number of hosts. You want to
centrally monitor and manage the hosts. You also want to generate reports for the hosts and the storage
resources that the hosts consume. What should you do?
A.Install the Veritas Quick I/O option on Storage Foundation 5.0 server.
B.Install Veritas Storage Foundation Management Server on Storage Foundation 5.0 server.
C.Install Veritas Storage Foundation Management Host on Storage Foundation 5.0 server.
D.Upgrade Storage Foundation 5.0 Standard to Storage Foundation 5.0 Enterprise.
Answer: B
Symantec ST0-10X최신덤프 ST0-10X dumps ST0-10X ST0-10X
NO.6 Which two restrictions does relayout place on the administration of a volume while it is in progress?
(Select two.)
A.During a relayout, you cannot create a sparse plex.
B.During a relayout, you cannot change the number of mirrors in a volume.
C.During a relayout, you cannot change the number of subdisks in a volume.
D.During a relayout, you cannot create a snapshot of a volume.
E.During a relayout, you cannot create a backup of a volume.
Answer: AD
Symantec ST0-10X pdf ST0-10X ST0-10X ST0-10X ST0-10X기출문제
NO.7 You are auditing a current storage environment that is not utilizing storage tiering. The information
gained from the audit is to be used in a new storage tiering design that will have 4 tiers (Tiers 1-4). You
need to determine the location for archive data which needs to be accessible but is not used heavily.
Where should you store this data?
A.Tier 1: High-end storage arrays with fast, reliable network connections.
B.Tier 2: High-end arrays, but performance is not a priority.
C.Tier 3: Mid-range to low-end storage arrays with fast, reliable network connections.
D.Tier 4: low-cost media, such as tape, with little consideration given to performance.
Answer: C
Symantec ST0-10X기출문제 ST0-10X dump ST0-10X
NO.8 The vxprint command output for volume vol07 indicates that it has three plexes. How will you
determine which plexes are used for data?
A.Note the lengths. Data plexes are all the same length.
B.Note the STATE field. Non-data plexes will be indicated by the value: LOG.
C.Note the STATE field. Data plexes will be indicated by the value: MIRROR.
D.Note the RECORD TYPE field. Data plexes are designated with PL.
Answer: B
Symantec ST0-10X ST0-10X ST0-10X최신덤프
NO.9 Which physical storage device is the equivalent to a virtual volume?
A.A disk
B.A partition
C.A block
D.A directory
Answer: B
Symantec dumps ST0-10X ST0-10X인증
NO.10 You need to create a volume for the HR department. You need to mount a file system with a high
demand for I/O throughput. You are aware that spanning the volume across multiple disks will increase
the I/O performance. Which risk should you be aware of when spanning the volume across multiple
disks?
A.Write throughput degradation
B.Single disk failure causes volume failure
C.Requirement for disk redundancy
D.Poor I/O performance
Answer: B
Symantec ST0-10X ST0-10X시험문제 ST0-10X
NO.11 How many free partitions do you need to encapsulate a boot disk?
A.1
B.2
C.3
D.4
Answer: B
Symantec ST0-10X덤프 ST0-10X덤프 ST0-10X ST0-10X자료
NO.12 What is the default limit to the number of subdisks that can be attached to a single plex?
A.1024
B.2048
C.4096
D.Unlimited
Answer: C
Symantec인증 ST0-10X ST0-10X덤프
NO.13 Which three are the database agents that are supported by Storage Foundation High Availability
version? (Select three.)
A.Informix
B.DB/2
C.Ingress
D.Oracle
E.Sybase
F.SQL
Answer: BDE
Symantec ST0-10X최신덤프 ST0-10X인증 ST0-10X기출문제
NO.14 You are working with the Storage Foundation Intelligent Storage Provisioning feature, to create a new
mirrored volume. To prevent system failure, you want to ensure that you are able to perform a recovery of
mirrored volumes in minimum response time.
What should you do?
A.Create a Dirty Region Log.
B.Create a Data Change Map log.
C.Create a RAID-5 log.
D.Create a Snap object log.
Answer: A
Symantec최신덤프 ST0-10X ST0-10X ST0-10X ST0-10X자격증
NO.15 You place six physical disks under Volume Manager control to create 10GB of volume. You want to
use this volume as an archive directory. You need to create a volume that will store three copies of the
archived data. Which command will you use to create a volume with three plexes?
A.vxassist make archivevol 30g layout=stripe-mirror nmirror=3
B.vxassist make archivevol 30g layout=stripe-mirror ncolumn=3
C.vxassist make archivevol 10g layout=stripe-mirror nmirror=3
D.vxassist make archivevol 10g layout=stripe-mirror ncolumn=3
Answer: C
Symantec ST0-10X ST0-10X자격증 ST0-10X dump
NO.16 You are monitoring a file system on a Solaris operating system using Veritas Volume Manager when
the following kernel message appears: WARNING: msgcnt x: mesg 069: V-2-69: memory usage specified
by the vxfs:vxfs_ninode and vxfs:vx_bc_bufhwm parameters exceeds available memory; the system may
hang under heavy load. You need to resolve this error. What should you do?
A.Increase the value of one or both parameters to 100% of physical memory or to 100% of kernel virtual
memory
B.Remove either the physical memory parameter or the kernel virtual memory parameter.
C.Leave the parameters at current levels and disregard the system message because it is a false
message.
D.Reduce the value of one or both parameters to less than 50% of physical memory or to 66% of kernel
virtual memory
Answer: D
Symantec인증 ST0-10X dumps ST0-10X pdf ST0-10X dump ST0-10X덤프 ST0-10X
NO.17 You have large number of mirrored volumes, and the resynchronization process on mirrored volumes
will take lot of time. You want to address enable Dirty Region Logging (DRL) and find out the cause why it
takes a long time for resynchronization. You want to check the status of DRL logging to see if it is already
enabled.
How will you accomplish this task?
A.Use the vxprint command with the -F%drllogging $DCOVOL option
B.Use the vxprint command with the -F%drllogging $DRLVOL option
C.Use the vxprint command with the -F%dcologging $DCOVOL option
D.Use the vxprint command with the -F%drllogging $$DCONAME option
Answer: D
Symantec dumps ST0-10X자격증 ST0-10X ST0-10X
NO.18 You are responsible for administering the Storage Foundation for Sybase server. You want to remove a
mounted volume. What should you do first to ensure you are able to remove the mounted volume?
A.Remove the snapshot from the associated volume.
B.Recursively remove all plexes and subdisks.
C.Disassociate the snapshot from the associated volume.
D.Unmount the file system.
Answer: B
Symantec인증 ST0-10X ST0-10X
NO.19 Which form of Disk Spanning allows you to map data in equally-sized chunks alternating across
multiple disks and is also known as interleaving?
A.Striping
B.Concatenation
C.Mirroring
D.Parity
Answer: A
Symantec ST0-10X시험문제 ST0-10X dumps ST0-10X최신덤프 ST0-10X ST0-10X최신덤프
NO.20 Which structure records are stored in the private region? (Each correct Answer presents part of the
solution. Select three.)
A.Disk group configuration
B.Disk and disk group ID
C.File system metadata
D.Disk group kernel log
E.Partition tables
Answer: ABD
Symantec ST0-10X ST0-10X ST0-10X dumps ST0-10X인증
ITexamdump의 MB2-866덤프의 VCE테스트프로그램과 MB6-889덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HH0-380시험에 대비한 고품질 덤프와 C_A1FIN_10시험 최신버전덤프를 제공해드립니다. 최고품질 100-500시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기